Red Hat / Fedora :: How To Install Rhel4 On SATA Disk
Oct 25, 2009Install rhel4 on SATA disk through VMWare6. I tried but The installation is not detecting the hard disk.
View 3 Replies
ADVERTISEMENT
Hardware :: How To Install Rhel4 On Sata HDD PC's
Nov 25, 2009just one month before i upgraded my pc to Later configuration but then i can't install rhel4 on my pc. i have heard there is a few upgrades (Updates) will help this issue, is that true? then which update i need to use for install rhel4 successfully on my pc? or is there any third part utilities for solve this issue? here i am adding my pc's spec
AMD Athlon 2.6
Asus M2N68-AM
2 GB DDR II
Nvidia 8400Graphics
Samsung HDD
Hardware :: Can SATA 3 (SATA III) Hard Disk Be Run On Motherboard Which Only Support SATA II
Aug 13, 2010Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies View RelatedGeneral :: Install Redhat9 On Sata Hard Disk?
Nov 14, 2010How can i install redhat9 on sata hard disk.
it always ask for drivers & i didn't find it.
Fedora :: F13 Does Not Recognize SATA Disk In USB Enclosure?
Sep 16, 2010I have a 3.5" SATA disk in an external enclosure which is connected to my USB port. How do I get F13 to recognize the disk? It does not show up in the Disk Utility (Applications > System Tools > Disk Utility).
F13 does recognize flash drives that I put into a USB port.
General :: Can Install Old Versions Of Redhat For SATA Type Hard Disk
Dec 14, 2010Can i install old versions of redhat linux (like versions 3,4,5) for SATA type hard disk. I heard that SATA disk will allownew versions of redhat linux only.
View 4 Replies View RelatedRed Hat / Fedora :: Can't Install RHEL4.7 From USB Flashdrive ?
Mar 18, 2010Ive created a bootable RHEL4 USB flashdrive so that I can do my installs from rather than using CDDVD's. The USB key boots fine to the point where it asks me to select a drive that contains the ISO images, but it doesn't show me the USB drive to select, only my 2 hard drives sda1 and sdb.
We currently use HP xw9400's with the following spec as shown in dmidecode:
BIOS Information
System Information
I know that the xw9400's have the nvidia mcp55 pro chip on the motherboard that handles USB, keyboard, mouse and other peripheral traffic, so am wondering if this could be what the problem is? Like there may some code that i need to tell the machine to use this or something?
Fedora Hardware :: New SATA Hard Disk Not Being Detected
Feb 8, 2011All of my computers are second-hand (except 1 laptop but it doesn't count) and I see in my Dell 4600 there are 2 SATA connectors on the motherboard. I picked up a 250 GB SATA hard disk and cables recently and tried plugging it in but the system doesn't see it. I even disconnected all other disks to make sure there wasn't a conflict (master/slave) issue going on but the system still does not see it.
The disk is vibrating so I assume it is getting juice and is spinning. Is there a setting or something I have to do to tell the system to access the SATA? Do I have to look at RAID settings if there is only 1 SATA disk? Can I not have a SATA disk and an ATA disk plugged in at the same time? I want to try and determine if the disk is bad, or is it PEBKAC!
Hardware :: Very Slow Disk IO On RHEL4
Jul 13, 2010I have an HP proliant server where i have internal hard disks and also HP MSA external storage.
The IO rate is very very slow on internal hard disks and also on MSA storage.
Se bellow output.
Code:
How can i increase the IO rate. I have another HP Proliant server and there i can see 98 MB/s speed of IO which is quite good.
Red Hat / Fedora :: RHEL4 MySQL Install In Limbo ?
May 10, 2010Running new install of Red Hat Enterprise Linux AS release 4 (Nahant Update 4), trying to install LAMP stack...
I downloaded 4 MySQL 5 RPMs from the MySQL site last Thursday:
Went to install the server, got the following:
Tried the following from the RHEL4 man pages for "Checking a package's signature".
Did the steps in Section 15.3.1, got the expected output from the following cmds:
OK, looks like it took...
Tried the install again, got this...!
-community-5.1.46-1.rhel4 is already installed
OK, so I'm still getting the bad key, but it's already installed...?
OK, maybe the first install was faulty. I'll uninstall and start fresh.
So I tried to uninstall using -e, got this...!
How something could be installed yet not installed...?
Fedora Installation :: 11 Installer Doesn't Detect Seagate Sata Disk
Jul 8, 2009I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
Slackware :: Can`t See 1Tb SATA Disk - 10.2.0
Jun 1, 2010Have a problem here with 1Tb SATA disk. Disk is visible during boot (dmesg below), all modules are loaded after (make menuconfig + select <M> + make modules + make modules install + modprobe)
fdisk -l can not see any /dev/sd...
modules are not in use
Code:
dmesg:
Code:
Code:
Red Hat / Fedora :: Unable To Install More Than 6 Sata Drives?
Apr 2, 2010The system is running great in fedora 7 or 12 with 6 sata drives installed. I tried to install 2 more sata drives(total 8 drives), tested some combinations: 6 drives in sata ports and 2 in sas ports, or 2 in sata ports and 6 in sas ports... the BIOS can detect all 8 drives, but the fedora 7 and 12 just detect 6 sata drives. It could be problem of sata/sas drivers of Linus. The chip set: Intel ESB2(6 ports) + LSI 1068E SAS controller(8 sas/sata ports) Linux: Fedora 7 and Fedora 12
View 7 Replies View RelatedGeneral :: Boot From Disk With Both USB And SATA
Aug 17, 2010I have a SSD Harddisk with both an usb and Sata connection, and I want to be able to boot both from usb and sata but I can't make it work. When the disk is connected with sata anything works fine but when I connect it with usb instead, Fedora seems to boot but then it gives me an "No root device found" error and just sleep forever. This happens even if I install fedora 13 while the disk is connected with usb. I am running Fedora Core 13. I changed my fstab to
/dev/sda2 / ext4 defaults 1 1
And the disk is still booting when connected to the sata controller. So far so good. But if I boot from the usb connection, it still give me the same "No root device found" message. Even more odd is it that if I boot my fedora core 13 dvd, and choose "rescue installed system" it can't detect the harddisk when connected to usb. And there is no /dev/sd* or anything similarly which could look like a blockdevice. Did redhat forget to include usb drivers in their rescue image for Fedora core? I just tried the disk on an other system, with exactly the same problems.
I have now added the LABEL=myroot line to fstab(I guess it have to be uppercase to work) and the harddisk still boot fine when using sata, but it still can't boot using usb. I begin to guess that redhat forgot some usb drivers In fedora Core 13, because the system can't see the harddisk when booting the dvd and entering rescue mode. blkid don't show any harddisks at all and there are no block devices in /dev/ which might be my usb disk. Is it possible to find the uuid of partitions if id add the usb harddisk to a windows computer, and more important: will this be the same uuid as linux will se.
Hardware :: New Sata Disk Not Working?
Apr 1, 2010I bought 2 new 1,5TB sata disks for my server. But when I plug them in my debian gives a error message: ata2: SRST failed error -16
The debian runs from an old 500GB ide disk and a 160Gb ide disk for the home dirs.
I tried antoher cable, but that is not the problem(or is that other cable also broken...). I also tried all sata modes in bios, auto, enhanced, sata-only. I also tried booting an ubuntu 9.10 live cd. But in gparted the disks won't show up.
Is it possible that the sata controller of the motherboard is to slow.
Ubuntu :: SATA II / Error "ata4: Limiting SATA Link Speed To 1.5 Gbps" - Allowing The SSD To Run At SATA II Speeds?
May 1, 2011I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
Ubuntu Installation :: Karmic Cannot See Sata Disk Known Bug?
Mar 11, 2010Is this a known bug? I've not had problem installing 9.04 but 9.10 will not see HDD under partition manager(ubiquity) no matter the F6 boot options or fiddling around with bios. If ubuntu can't see the hdd, I can't install. 785G chipset with SB710 FYI.
View 4 Replies View RelatedUbuntu Installation :: Can't Partition Sata Disk
Nov 26, 2010I'm trying to install 10.10 on a sata disk. In terminal, dmesg recognizes the disk at /dev/sda. The installer recognizes it as well, but the partition area is blank and the option are greyed out. How can I go on? BTW, on the disk currently Fedora 14 is (fresh) installed and working fine, but a software install script is written specifically for Ubuntu. That's why I need to change to Ubuntu and it's no hardware problem.
View 9 Replies View RelatedGeneral :: Identify If A Disk Is SATA / ESATA?
Mar 9, 2010As we know in Linux both SATA and eSATA disks are enumerated on /dev/sd[x] path. Is there a way using which i can identify if the device is an internal SATA or eSATA?
View 1 Replies View RelatedHardware :: Change LVM Disk Sata Port?
Oct 18, 2010I have Linux system with 6x500 GB sata drives on LVM. I want to change 1 of the disks with larger - 1 TB. I don't have available free sata ports, so I'll add pcie sata controller. I'll add the 1 TB disk to the pcie controller and will use "pvmove" to transfer the PEs from one of the 500 GB drives to the new 1 TB. Then I want to remove the 500 GB disk from the LVM. I want to remove the physical disk from the box and to place the 1 TB disk on its place. But I don't know if the LVM will recognize the disk? I want to remove the pcie controller from the box because the motherboards sata controller is better.
View 1 Replies View RelatedHardware :: Cannot Boot From SATA Disk - Timeout 10
Jun 17, 2010I have a problem to boot from a SATA disk. The filesystem image was created by our customer and copied to the SATA disk. It is SLES 10.2. When booting, "waiting for /dev/sda2 to appear" appears. The filesystem seems not to be corrupted, it can be mounted via a live CD. Here are the files I consider being useful for you.
menu.lst
Code:
timeout 10
gfxmenu (hd0,1)/boot/message
title SLES 10.2
kernel (hd0,1)/boot/vmlinuz root=/dev/sda2 vga=0x314 splash=silent resume=/dev/sda1
showopts initrd (hd0,1)/boot/initrd
title Failsafe -- SLES 10.2
kernel (hd0,1)/boot/vmlinuz root=/dev/sda2 vga=0x314 splash=silent resume=/dev/sda1 showopts ide=nodma apm=off acpi=off noresume selinux=0 nosmp noapic maxcpus=0 edd=off
initrd (hd0,1)/boot/initrd fstab
Code:
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
/dev/sda2 / ext3 defaults 0 0
/dev/sda1 swap swap pri=42 0 0
fdisk -l
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104514+ 82 Linux swap / Solaris
/dev/sda2 * 263 4209 31704277+ 83 Linux
Debian Hardware :: SATA Disk Not Visible After 8.1 Installation
Jun 20, 2015Debian 8.1
Kernel 3.2.0
xfce4
I own a secondary SATA disk I used without problems. In the last days I updated to 8.1 and after that I was not able to read the disk. The fdisk -l command has the output:
Code: Select allDevice Boot Start End Sectors Size Id Type
/dev/sdc1 * 63 117194174 117194112 55,9G 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 37,3 GiB, 40020664320 bytes, 78165360 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00087e23
The disk is mounted on:
Code: Select all/dev/sdc1 on /media/stefano/MobileSata type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
When i access to the disk, i always have the error:
Code: Select allstefano@GhilbaDebian:~$ ls -l /media/stefano/MobileSata
ls: impossibile to access to /media/stefano/MobileSata: input/output error
In the dmesg there is no particular message.
Ubuntu :: Second SATA Hard Disk Doesnt Show Up?
Aug 31, 2010I've installed 500 GB SATA hard disk but SUSE doesnt see it. The BIOS recognized the disk. What do I do in order to get the disk show up as sdb.
View 1 Replies View RelatedDebian :: Sata Disk Write Speed Is Very Slow ?
Sep 14, 2010I got a new machine with GA-p55A-ud3 mobo and a WDC WD10EARS 1T disk.
When I tried to benchmark the disk IO, I was suprised by the low write speed:
The related output from my lspci:
The related output from my lshw:
General :: How To Install X Windows On My Rhel4 Using Rpm
Aug 29, 2010My X windows wasn't deployed in the installation at the beginning , but i need to install it now , my system is RHEL4 , i am not connected to the internet , so i will not be able to use up2date , so I need to use rpm instead.
View 2 Replies View RelatedSoftware :: Install RHEL4 From Pendrive
Dec 31, 2009I want to install RHEL4 from pendrive because of my dvd drive is not working. what is the procedure for that?
View 3 Replies View RelatedRed Hat :: Install RHEL4 From A Ghost Under Vmware
Apr 28, 2009I would like to have your opinion on the problem : I created a ghost of my server RHEL4 with RAID 1 and 5, then I wanted to reinstall it on a virtual server under vmware.
So I restore the image on a virtual disk and qand I restart I still have this problem :
I started in linux rescue mode F5 I reinstall Grub on sda
I modified the modules.conf file to change the BusLogic SCSI, but this module is not in the kernel I used kudzu to reconfigure it doesn't works...
Fedora Installation :: Installing On New Disk But Killed Old Install Of Fc8 On Another Disk
Mar 15, 2009I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
View 14 Replies View RelatedDebian :: Internal SATA Disk Slower When Running On Battery?
Feb 5, 2010I have Etch running in my laptop. I found that if the laptop is only running on battery, the disk seems to performs slower than if I running on a power adapter. How do I possibly check the setting and fix it?
I'm the only user on the system most of the time and I keep it as minimal as possible so it's not other services and programs keeping the disk busy.
Debian Configuration :: Sata Disk Write Speed Is Very Slow
Sep 14, 2010I got a new machine with GA-p55A-ud3 mobo and a WDC WD10EARS 1T disk. When I tried to benchmark the disk IO, I was suprised by the low write speed:
[Children see throughput for 1 initial writers = 35962.63 KB/sec
Parent sees throughput for 1 initial writers = 35962.63 KB/sec
Min throughput per process = 35962.63 KB/sec
[code].....