Server :: Save The Resolve.conf About Nameserver Forever?
Jun 20, 2011
I use red hat Es 5.5 64 bit.. I find the item nameserver in resolv.conf cannnot be saved. Everytime ,reboot or restart the netwrok service . The data in resolv.conf will be removed and clear . I need to edit it again . I also try to add DNS1=XX.XX.XX.Xx in ifcfg-eth2 but the same problem. in it , the resolv.conf is still need to edit every network service restart . So, how to save the resolve.conf about nameserver forever ??
[root@vls etc]# cat resolv.conf
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
[Code]...
View 9 Replies
ADVERTISEMENT
Sep 1, 2010
As I understand it, /etc/resolv.conf is rewritten at boot time by NetworkManager (a script?)I have a problem in the order the nameserver entries are written by my system (F13). This is:
Code:
nameserver 192.168.1.1
nameserver xxx.233.0.4
[code]....
View 11 Replies
View Related
Dec 7, 2010
I'm trying to query the second nameserver on a local network to resolve local domain names to IP's.
Code:
$ ping ids.mydomain.loc
ping: unknown host mydomain.loc
[code]....
View 6 Replies
View Related
Mar 22, 2009
I just installed F10 from a Live download iso on a Sony VAIO laptop with an Intel PRO/Wireless LAN2100 3B Mini PCI Adapter. The linux driver is ipw2100 and functions without problems.
After the install I accepted the update downloads offer and downloaded somewhere around 170 updates. The kernel version is 2.6.27.19-170.2.35.fc10.i686.
I am using a Linksys WRT55AG as a DHCP server. Using NetworkManger it assigns IP addresses without incident.
My problem is that I can't get name resolution to function without manual intervention.
I can ping other wireless nodes on my network and the response to $ dig -q www.yahoo.com is: ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 30153
The /etc/resolv.conf file contains no entry for 'nameserver=' and if I manually edit /etc/resolv.conf, it is overwritten on reboot or restarting the NetworkManager service. I am aware of /etc/sysconfig/networking/profiles/default/resolv.conf.
Additionally, in the var/log/messages file I can see that NetworkManager makes links between /etc/resolv.conf and the default version.
However, after either rebooting or restarting the NetworkManager service, if I manually enter a DNS address 192.168.1.1 (my wireless router) under the DNS tab of the system-config-network 1.5.95 application. This address does not persist after either rebooting or restarting NetworkManager.
If I disable NetworkManager, I can't get the WRT55AG to assign the wilreless adapter an IP address.
So the bottom line and my question is what do I need to do in order to simply boot and have wireless connectivity?
To what file does system-config-network 1.5.95 write the DNS address entered from it's GUI?
View 6 Replies
View Related
Mar 4, 2011
This continues a thread started in the applications forum:mc hangs temporarily when network is downmc (Midnight Commander) hangs on my desktop but not on my laptop. When I compared desktop and laptop configurations, I found the following differences:
/etc/hosts files:
Code:
Laptop: 127.0.0.2 linux-4xt8.site, linux-4xt8
[code]....
View 9 Replies
View Related
Apr 26, 2010
i am currently working on ldap server configuration and i had made changes on smb.conf file but i don't know how to save these change. am using ubuntu 9.10
View 1 Replies
View Related
Jul 14, 2010
I have a domain name and I want to host it on my ISP.What my goal is is to have 2 nameservers:NS1.mydomain.com
NS2.mydomain.comI want to be able to put www.mydomain.com and have DNS do its thing. I want to use BIND to do this. This is a new realm for me, and i know exactly what I want to do, but I struggle putting it in words
View 1 Replies
View Related
Jan 23, 2010
I've been trying to setup dual-screen in my system, but the control panel complains it can't find xorg.conf and so I can't save changes I make in the nvidia control panel. I was trying various methods of trying to get a dual screen working how I like it.Left = 17" 1280x1024 that sometimes works (needs hitting a few times)Right = 21" 1680x1050 main screenI wanted to have everything on the right one, my main workspace. And I wanted a seperate x workspace on the left hand one. (Mainly so that when the one on the left decides to not work, I can use the panel thing at bottom to move apps to the right one)
Now I know since 9.10 xorg.conf is non-existant and so determind on the fly or something.Is there a way to get X to write out the current working xorg.conf that's it's using? i.e. It's auto determind x,y,z and that's what right now this second is being used. I want to save this as a working xorg.conf so I can fine tune it etc.
View 1 Replies
View Related
Mar 13, 2010
When I try to save a file that I have edited using gedit I get a error Could not save the file /etc/pwrstatd.conf.You do not have the permissions necessary to save the file. Please check that you typed the location correctly and try again.Is this something to do with not being logged on as root? If so how do I log on as Root or edit the file as a root user?
View 4 Replies
View Related
Oct 31, 2010
Just a quick question - with 10.10 where do I save the Xorg.conf?
Is it :-
a) /etc/X11/
b) /usr/share/X11/
[code]....
View 2 Replies
View Related
Dec 4, 2009
I wanted to change screen resolution manually from xorg.conf and apparently a missed it up and my fedora core stucks and wont start, how can i start fedora in command line (so that i can remove xorg.conf), i tryed ctrl+alt+f1, ctrl+alt+backspace and still cant start in command prompt.
View 10 Replies
View Related
Mar 7, 2010
I am not able to find /etc/resolve.conf on my centos machine.it says no such file or dir .with out this file i am not able to connect to internet.when i ping my localhost and my machines ip address i am getting a reply.but when i ping some domain(eg - google.com) i get no reply.i tried manually entering the dns nameserver from system->adminstration->network->dns tab.i dono what ip to enter there..
View 2 Replies
View Related
Dec 9, 2010
I am using Ubuntu 9.10 Desktop Version and the entries did in /etc/resolve.conf all the time it is cleaning as and when i am restarting my systems. How to make is permanent solution to keep all the entries done in /etc/resolve.conf
View 1 Replies
View Related
Aug 24, 2010
My configuration: CentOS in a VPS environment, I have 2 static IPs at my disposal.I'm having trouble setting up my nameservers. I've registered the nameservers with my registrar and supplied the GLUE records, however my registrar has not yet applied this information into the DNS zone, because my nameservers fail to generate a response on port 53.DNS check says the following about my nameserver address:Checking SOA records for domain. Domain server is not answering to UDP requests on port 53. Possible problems: A firewall is blocking port 53, server is down, server is not running software for handling dns requests.So the only two possibilities I see is that my port 53 is somehow blocked or not properly set to accept and send the correct traffic or that I've misconfigured BIND.
View 2 Replies
View Related
May 19, 2009
I have a Elo AccuTouch 2216 USB touchscreen that seems automatically supported by a clean install of Ubuntu 9.04.
However, to actually use it correctly, I need to run some xinput commands to invert the Y axis and calibrate:
Code:
These properties are shown by xinput list-props and documented as properties in the evdev Xorg input driver man page.
My questions is - where can I configure or save these settings so I don't have to ever enter again? On older versions of Ubuntu for serial touchscreens I'd add to xorg.conf, but that seems to be depreciated and these are listed as properties instead of options.
View 3 Replies
View Related
Dec 16, 2010
I have discovered that after employing the Wicd Network Manager I can no longer connect via ppp. The reason, it seems, is that each instance of Wicd changes the content of my /etc/resolv.conf file from:
Code:
search SPRINT
nameserver 195.128.182.5
to:
Code:
Generated by dhcpcd
# /etc/resolv.conf.head can replace this line
# /etc/resolv.conf.tail can replace this line
It has been suggested that I write a script that does this.
View 2 Replies
View Related
Jan 11, 2010
does anyone know of a good site/book/guide to learn about linux web server administration?
and also how do you find the your own nameserver numbers? would that just be the IP of my web server?networking isn't my forte, but i do intend to learn with this project.
View 5 Replies
View Related
Sep 3, 2010
How do I know the reply was from caching-nameserver, master nameserver or slave nameserver in BIND DNS.? Can I trace the nameserver that replied my dns query? Like I have a master nameserver, a slave nameserver and a caching nameserver in my network. Is it possible to know that which of these servers replied my dns query? Also can i trace back that replying server exactly?
View 3 Replies
View Related
Jun 1, 2009
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
View 3 Replies
View Related
Jan 5, 2010
I've configured the RADIUS to use a PostgreSQL DB for accounting. Everything works fine if the connection from the RAD to the SQL is OK. If the PostgreSQL service dead, the RAD will skip the failed connection and continue to work. That's OK, too. But if I shutdown the network interface of the SQL (simulating a connection lost - timeout problem), the RAD thread which processes accounting request will be hung up, remains as active and unresponsive forever. So the RAD will not return anything to accounting client (my NAS).
As more accounting requests come, spare threads for processing the requests will reduce and be used up eventually. I've debugged for a while and found it's the problem of PQexec() function. The function blocks the thread eternally till if the connection lost. I know the RAD version is a little outdated, but I cannot replace it right now. I wonder if there's a way to make the RAD reply to the NAS even when the connection between the RAD and the SQL lost.
View 1 Replies
View Related
Mar 2, 2010
I looked for a solution to this,and found a thread for it ,but I dont know how to do what it says.Here is part of it by the user "cameronol": There is a bug in Ubuntu 9.10 Karmic with the default /etc/X11/xorg.conf involving Nvidia. receive the error"Failed to parse existing X config file '/etc/X11/xorg.conf'.Then he posts:
[Code]...
Then he says to delete the first section with the default screen,and it will be fixed.But HOW do I look for the /etc/X11/xorg.conf file to edit it,and how do I edit it?I am new to ubuntu,but I have learned to use a terminal(I think)It seems to be just like the "run" box on Windows.I did a search for the file,but came up empty.I want to fix this cause every time I restart,I have a low resolution that is impossible to work in.
View 2 Replies
View Related
Aug 20, 2010
I am setting up LDAP server, i set slapd.conf(dc=proldap,dc=com) and start ldap it is OK but when i check using ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts result is : namingContexts: dc=my-domain,dc=com
it seems that it did not use my slapd.conf so i tried removing my slapd.conf from /etc/openldap and start slapd again and it did start with no errors. and when i do ldapsearch again still uses dc=my-domain,dc=com
I tried searching about this in google and found no answers,
my reference in setting up ldap is the link below. but it seemed that it always uses another configuration not the one i modified
I'm using Fedora12, ldap version 2.4.19. i installed ldap by yum install url
url
View 12 Replies
View Related
Jul 8, 2011
what is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies
View Related
Feb 21, 2010
I'll preface this by saying i'm by no means an expert on Linux. A competant beginner at most.We have a dedicated server, the 'resolv.conf' was changed, specifically the domain that was listed (this is the primary domain).I only became aware of this change, when we get into work on Friday and all our sites were down - I attributed this to DNS fault as if I changed my host file (I work on a windows machine) and specifically routed to the domains to the correct IP address, the websites were served fine.I tracked down the resolv.conf change by quizzing a collegue. I then switched the resolv.conf file back to it's original state - luckily a backup was made so I am 100% sure that the current resolv.conf is the correct one.
change was made Friday morning, around 9.30am (UK time). It is now 5.05pm (UK time). The original change was made sometime on Weds afternoon, and the sites stopped serving between Thursday night and Friday morning.Does anyone have any idea how long it should take for the fix to be picked up? Will it be picked up? I just started to think that the change can't be picked up due to some DNS related voodoo.
View 4 Replies
View Related
Jul 13, 2010
I've got a DNS problem I cannot figure out. I've been digging and pinging all day and I've waited for caches to expire and I'm not having much luck.From my desktop mac, I can't seem to resolve mail.port-o-call.net:
Code:
My-Mac:~ sneakyimp$ ping mail.port-o-call.net
ping: cannot resolve mail.port-o-call.net: Unknown host
[code]....
View 4 Replies
View Related
Jan 18, 2011
I have set up DNS server set up on my RH 5.5 system. It is working perfectly as Caching only Server but but when i tried to make it a primary server for a zone it didn't resolved. I am actually a newbie so please correct me if i am wrong somewhere. Here are my configuration files code...
View 10 Replies
View Related
Aug 19, 2010
A server at which I have an account has changed things. The new /etc/resolv.conf fails to resolve a lot of addresses. I can use dig @ with OpenDNS and resolve them successfully, but how do I get apps, such as sendmail, to use a nameserver I specify? It'd be nice if a user could have his own additions to resolv.conf, but I don't see that in the docs, or a way to get sendmail to use a specified nameserver.
View 2 Replies
View Related
Mar 27, 2010
Ok, one more question on nameserver security. So I was reading this post and it recommended not setting a defined outgoing port for your nameserver due to the Kaminsky vulnerability.What is the proper way to lock down a nameserver, but avoid the vulnerability of only allowing incoming and outgoing requests on port 53
View 3 Replies
View Related
May 7, 2011
i've just setup a vps server with 11.4 everything is almost look fine now, but i couldn't setup a nameserver, i've searched on the internet about that but directories is different in suse. anyway i registered a domain on onlinenic yesterday and i want to use this domain as a nameserver and my hostname. how can i do that ? and do i need to have at least 2 ip for that ?
View 7 Replies
View Related
Feb 22, 2010
When I edit /etc/resolv.conf, it is overwritten right away with the old configuration. How do I really change the nameserver on Ubuntu Server 9.10?
View 1 Replies
View Related
