Software :: Rsh On Fedora 9: Error Sending Audit Event
Jul 20, 2010
I am using fedora 9, with kernel version 2.6.25-14.fc9.i686. I installed rsh-server. My configurations (with firewalls off)were:
1. In /etc/xinetd.d/rsh made "disable = yes" to "disable = no"
2. In /etc/securetty included the lines rsh and rlogin
3. By switching to user 'user1', in /home/user1/.rhosts included ip address of remote machine and issued 'chmod 400 /home/user1/.rhosts'
4. restarted xinetd service
When I issue the following from remote machine rsh <ip address> -l user1 ls it fails saying 'Error sending audit event.' In 'tail -f /var/log/messages' I could see the error dump
socket bind: Invalid argument (errno = 22) Error sending audit event.
View 1 Replies
ADVERTISEMENT
Jan 28, 2011
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies
View Related
Nov 13, 2010
Currently the Apparmor program has the notification logs saved to /etc/apparmor/notify.cfg, however, when I try to save the notification after putting my email address in, I get an error saying "Configuration failed for the following operations: Unable to write config changes to /etc/apparmor/notify.cfg"looking inside the folder, I do not see any file named "notify.cfg" BUT I do see so files called reports.conf, logprof.conf, and reports.crontab. I am guessing that the program is asking to save the notification changes to a file that does not exist and in fact one of those three files are the proper ones to use. Well if that is the case then how would I go about fixing this error?
View 4 Replies
View Related
Apr 11, 2011
I am running RHEL 5.4 Server (32-bit) and have my audit.rules file set up per a template that I am required to use. There is one particular rule that audit is auditing the unlink of files. With this set, my log files are filling up very fast, as there is a particular app that constantly touches/ deletes a couple of files, which the unlink is catching. Here is the audit rule:-a always,exit -F arch=b32 -S unlink -S unlinkat -S rename -S renameat -F auid>=500 -F auid!=4294967295 -k deleteI commented out the "-S unlink" and my logging returns to normal (as expected). For right now, I was wondering if there was a way to set this rule up to exclude these couple of files from what auditd is capturing?
View 1 Replies
View Related
Feb 11, 2010
With /usr/bin/canberra-gtk-play set to --id='desktop-login' in the startup Applications dialog one expects a sound to play at login. This is not the case with fedora 12. I set the variable to --file=/home/me/sounds/myloginsound and I got sound.
I'm curious as to why the event id failed. I suspect that id was not linked/associated with any sound before fedora 12 was released. How does one troubleshoot sound event ids and their associated sounds in f12.
I'd like to get audio when I log out as well. I recall seeing a dialog box with events and associated sounds in f11 (or was it f10?) .... I don't see it in f12
1. Does anyone know which package adds that functionality?
2. In the absence of a GUI approach, how can this be achieved (with the terminal)?
View 2 Replies
View Related
Apr 16, 2010
In window , I can catch all of systems event by window API, but in Linux,I don't know how to do it.
View 2 Replies
View Related
May 26, 2010
$ cat /etc/redhat-release
CentOS release 5.4 (Final)
I've tried two copies of a: Microsoft Natural ergonomic Keyboard 4000 v1.0 Both fail. The result is my screen fills up with whatever key was missed. Re-pressing the key does no good. I have to unplug the keyboard and then plug it back in. So, I'm interested to know if this is a general problem or just my system. Meanwhile, I'm turning down the key repetition rate so it doesn't immediately fill my screen when it happens.....
View 3 Replies
View Related
Jun 4, 2010
I was having a job in /etc/event.d. It was working fine upto FC12. With upgrade to Fedora 13, it stopped working . Searching the internet, It looks like /etc/event.d is obsolete and I need to use /etc/init. Also the filename has to have a '.conf' extension. So I have renamed my job as /etc/init/svscan.conf.However, it fails to start automatically on reboot . It works if I manually issue the command % sudo /sbin/initctl emit qmailstartBut fails to start automatically on reboot. Is there anything wrong in my script below ? Let me know if I have missed out anything?
% cat /etc/init/svscan.conf
# svscan - runlevel compatibility
# WARNING: This file was auto-generated. Do not edit!
[code]....
View 4 Replies
View Related
Jan 31, 2011
ok so my Tech teacher installed Ubuntu on my laptop for me so that i could try to program with Objective-C in the terminal. It didn't work. Just the other day i tried to remove the partition to make space for other things that i needed on my computer.
I also made my Vista portion take of the part that was controller by Ubuntu. Now when i run i get a message that says
error: no such partition.
grub rescue>
IDK what to do, i have no cd to instal it again, oh yeah and in 2 and a half hours, i won't have a computer because the one that i am on now goes back to my co-op.
View 8 Replies
View Related
Jul 30, 2009
I was using V9 and upgrade to V10 and now my logins in my inittab do not work. I realize that is file structure is outdated so I made individual run files for each of my serial devices under event.d ( such as TX0000 - rc....etc) - all this works but i need to manual type initctl start TX000o to get logon for my serial devices. I would so much like them to automatically start on bootup.
View 3 Replies
View Related
Sep 20, 2010
From 2/3 days my evolution mail client is not working properly when i'm trying to send mail from it. In case mail receiving it has no problem but the problem is occurring when i'm trying to send mails with following error..Error: Welcome response error: Server busy, too many connectionsI'm using: Ubuntu 9.10, Evolution 2.28.1
View 4 Replies
View Related
May 12, 2010
I have an issue when sending snmp traps. I have an embedded system connected to a SNMP manager. I am sending traps from the box to the manager continuosly. After sometime I don't see any trpas coming out.
I get this error message.
Cannot open file /proc/net/tcp ...
: Too many open files
Cannot open file /proc/net/snmp ...
: Too many open files
What could be the reason for such an error?
View 1 Replies
View Related
Oct 18, 2010
Just upgraded to 10.10, evolution worked the first time but has not worked since. Have tried re installation but no joy. Starting for terminal shows:-
(evolution:16876): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
It was working in 10.04.
View 3 Replies
View Related
Jun 6, 2011
I have set up evolution with what I believe to be the proper settings.Pop3.live.com for the incoming mail server and smtp.live.com for the outgoing mail server.The problem I have at the moment is this: When trying to receive mail, after entering my password at the prompt,
I get the error message:
Error sending password: -ERR mailbox could not be opened.
I'm reprompted to enter my password and I no longer get the previous error, but instead a new one.Error sending username: -ERR unrecognized command.This error message persists every time I enter my password. I have noted that there are no penalties for entering an incorrect password, so I've posited that the problem is on my end.
View 9 Replies
View Related
Aug 19, 2009
i configured sendmail with squirrelmail in RHEL5.3
it is working fine. i can send the mail and receive the mail .
but when i try to send the mail a selinux error is coming[but mail is sending successfully ]. i don't under stand this message.
Quote:
Summary:
SELinux is preventing sendmail (system_mail_t) "read" to eventpoll (httpd_t).
Detailed Description:
SELinux denied access requested by sendmail. It is not expected that this access is required by sendmail and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access.
Allowing Access:
Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for eventpoll,
restorecon -v 'eventpoll'
If this does not work, there is currently no automatic way to allow this access.Instead, you can generate a local policy module to allow this access - see FAQ(url) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended.Please file a bug report (url) against this package.
Additional Information:
Source Context system_u:system_r:system_mail_t
Target Context system_u:system_r:httpd_t
Target Objects eventpoll [ file ]
Source sendmail
Source Path /usr/sbin/sendmail.sendmail
Port <Unknown>
code....
View 3 Replies
View Related
Apr 8, 2011
i am using this python code to send an email
Code:
#!/usr/bin/python
import smtplib
sender = 'from@fromdomain.com'
receivers = ['to@todomain.com']
NameError: name 'SMTPException' is not defined
apparently there is something wrong with /usr/lib/python2.6/smtplib.py but i cant make it out
View 2 Replies
View Related
May 1, 2011
Since upgrading to 11.04 yesterday, nauilus has been acting strangely. It takes about 30 seconds for a right click on the desktop to respond, whereas before it would've taken 1 or 2. Also, when trying to open a directory, say, the Home direcotry accessible from the launcher,it takes about a minute to open, which is odd,because all of my other applications (Chrome, Banshee etc) ares all running smoothly. And when the direcotry windowe does open, within 10 sconds it will turn grey and prompt me to force quit. When i try to open nautilus from a terminal, it comes back with the message
Code:
(nautilus:3508): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 5 Replies
View Related
Dec 10, 2010
I want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.
Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net
How to solve this email error I get when I try to send email via KMail.
View 2 Replies
View Related
Jul 6, 2011
i had configured mail server in linux. i had configured sendmail in linux client . i have error while sending mail through thunderbird smtp auth error how can i resolv the issue .....
View 1 Replies
View Related
Jun 10, 2010
how do i delete a folder and its contents from terminal? when i tried to delete the folder it returns a- permission error,,-
View 2 Replies
View Related
Apr 19, 2010
I move a page from a server in SuSe to Debian and this script was working well but when I move the page to a Debian base server it is sending in the logs the following message:
cat: write error: Broken pipe, referer: [URL]
The cgi does the following, read a db file plain text that repeat each 15 lines an information where to look the seraching info. if it is there sends to the output the 15 lines block. but it was not sending errors in suse distro, does anybody knows why the cat's line are sending "cat: write error: Broken pipe," if I am not writing or making a pipe with ">" to none file.
View 8 Replies
View Related
Mar 8, 2011
I'd like to know how do I rotate the audit logs under "/var/log/audit/audit.log" every 6 month. Currently I have set the parameter inside /etc/audit/auditd.conf to "KEEP_LOGS" (Previously "ROTATE" )and logs files are generated up to the size 5M and never deleted. Do I need to change inside "/etc/audit/audit.rules" file?
[root@RHEL5 ~]# more /etc/audit/auditd.conf
#
# This file controls the configuration of the audit daemon
#
log_file = /var/log/audit/audit.log
[Code].....
View 4 Replies
View Related
Dec 20, 2009
while booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
View 2 Replies
View Related
Feb 16, 2010
I am trying to setup auditing for NISPOM requirements using the built-in linux audit kernel which uses auditd and audit.rules for setup. I have been able to meet all other requirements, but I cannot find a way to audit user logout actions. My audit.rules file is listed below
Code:
#This file contains the a sample audit configuration intended to
# meet the NISPOM Chapter 8 rules.
[code]....
View 3 Replies
View Related
Jan 7, 2011
I would like to log all the commands executed (in full) by all the users or alteast myself.
package lastcomm, doesn't store full command.
View 2 Replies
View Related
Aug 24, 2010
When the audit daemon starts and stops, I see DAEMON_START DAEMON_STOP in the audit log. I don't see a rule in audit.rules about logging this event. So, I'm guessing that it's a rule that's built into the audit daemon. Can you confirm this?Also, I've been looking for a explanation of the event types that the audit daemon logs, such as: USER_AUTH, USER_ACCT, CRED_ACQ. If you know of any docs that explain this,
View 2 Replies
View Related
May 21, 2010
I'm trying to add the -audit option to X Server. I run ps -ef | grep -v grep | grep "bin/X" and get: root 2511 2506 0 10:35 tty7 00:00:09 /usr/bin/X:0 -br -verbose -auth /var/run/dgm/auth-for-gdm-sScn1P/database -nolisten tcp vt7 So I'm thinking that I need to add -audit to the /usr/bin/X file, but I believe that it's binary and created by something else, but I can't find that "something else". How on earth can I add this option? I have opened up 1,000,000,000,000,000,000,000 files (slight exaggeration) and I've come up empty.
View 1 Replies
View Related
Sep 27, 2010
One of our customers is looking at enterprise audit of their data center (primarily consists of Linux servers) We suggested them towards a SNMP based tool that has some limitations. Any other recommendation is welcome...
View 1 Replies
View Related
Jun 7, 2010
Strange :during the configure. I have checked :checking for struct audit_tty_status... no#uname -aLinux lfslc5 2.6.18.8-xenU-64b #1 SMP Tue May 6 18:09:10 CEST 2008 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Mar 14, 2011
selinux and psacct is disabled in this system (RHEL5.6 2.6.18-194.11.3.el5 SMP x86_64). After performing a yum update, the syslog is flooded with kernel audit messages (related to PAM), even though audit service is turned off. Is there a way to disable this verbosity?
[Code]....
View 2 Replies
View Related
