I was able to sort out configuring TigerVNC in my Scientific Linux 6 and was able to make me see my own dekstop in VNC.
I installed TigerVNC in another machine running Windows 7 (starter).
how can I be able to connect these two machines in VNC. We are networked by a router at home.
I want to make SL6 as server and Windows 7 as client.
I'm running a Fedora 13 print server, with CUPS package:
Whenever I try to print from a Windows (XP or 7) client to a Samsung ML 3050 printer, the printer pauses itself with the error:
I setup Windows clients with the following URL:[url]
Output from log file attached. This used to work fine previously from Windows, and I can still print from Linux clients.
I start x0vncserver like that:
Code:
x0vncserver --PasswordFile=~/.vnc/passwd
But clients that are connected to me cannot see the cursor on my desktop. I have tried to play with options in clients (Vinagre and TigerVNC viewer) and server with no luck.
P.S. I cannot use standart Vino server because of its poor performance with Gnome3. P.P.S. My system is Fedora 15
I have TigerVNC installed on Fedora 14 and when I boot up I get the following message in the log file in the ~/.vnc directory :
Quote:
Tue Nov 30 21:29:00 2010
vncext: VNC extension running!
vncext: Listening for VNC connections on all interface(s), port 5901
vncext: Listening for HTTP connections on all interface(s), port 5801
vncext: created VNC server for screen 0
[Code].....
The interesting thing is that if I run TigerVNC Viewer I actually get accesses to the TigerVNC server.
install and config TigerVNC in Fedora 12 that runs on PC without monitor.
View 10 Replies View RelatedHow do you configure FC11 to grant full control to the tigerVNC session. I cannot do any software updates, update vsftp through the GUI and add different software.
There are probably more things.
I can do this from the local console but I want to run two systems headless and use my three monitors on a single system that I manage them from.
My desktop is running 'buntu 9.10 and I have recently aquired a couple of half decent servers running Windows server 2003. I have a few windows app's that I use regularly for work that I have had limited success in running with wine or in vm's. I stumbled upon a how to to call apps in a vm to run seamlessly on the host desktop and did some playing and have succeeded in calling app's on my servers from my 'buntu desktop, the command I have set in my launcher for one of them (DIALux)
My question is, can I change the default application/file association in 'buntu with a custom command so I can double click on a file and have it open in one of these remote app's??If I can, what is the correct custom command to be using as using the above doesn't work at all, it just tries to open the file with rdesktop not the remote app.
I have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies View RelatedI have one Windows-XP on Machin 1 and one Linux on Machine 2.
I want make Linux machine as CVS server and Windows Xp as CVS client.
How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
Photo : http://img27.imageshack.us/img27/5864/cvsserver.gif
I have a wireless router situated in another room. I am able to access this router (and consequently the internet) through a Windows laptop that has a wireless card in it. However, my other laptop that has Ubuntu 10.10 installed on it, doesn't seem to have a wireless card in it, and I have confirmed this by running the commands
Code:
lspci
and
Code:
iwlist scan
I briefly was able to share a folder in my Windows machine, and access it through my Ubuntu machine, after connecting both laptops with a cross-over cable. However, I can't even ping the Windows machine from my Ubuntu machine anymore, after trying to configure the IP addresses. I think I screwed it up.
Also, although this is not an Ubuntu issue, I have a weird Windows problem, where I can't access the Internet when both wireless and wired ethernet controllers are active at the same time. It would be a bonus if you could solve this problem too for me. I was surfing online for a solution to this problem for quite some time, but I was unable to comprehensively understand and implement what I browsed through. Also, some of the guides, like for example, that on configuring Samba, seem to be outdated, as the terminal tells me something like the package (that was required to be installed by the guides through sudo apt-get install) has been superceded. Hence I post here for clear, concise and easy-to-understand help from you gurus. It would be great if I could achieve the end result of being able to access the internet on my Ubuntu machine (through the Windows one).
I'm trying to setup a linux box to act as just a DNS server. Its something I'd like to use just for WAN type requests and leave other domain related things to the Server running WIndows.At this point on my Linux box, I can run queries and nslookups from it. I can not however, from a Windows box, run a NSLOOKUP command from the Linux box which is telling me to check the permissions from Linux to enable that for the clients. It's enabled.From a C: I type in nslookup - *ip of Linux box* and it tells me -- Can't find server name for address.
View 4 Replies View RelatedI have NIS and NFS Server in Linux EL5 and i want to make client as windows..How to make windows as client for Linux server..Can any one explain me more detail.
View 3 Replies View RelatedI have a very nice SUSE 11.2 Samba PDC that runs well with Windows XP clients. I am using NETBIOS for name resolution since I dont want to put in a DNS server because my router already has one, Im pretty sure it would make things more complicated. I enabled wins support in smb.conf and made the name resolve order with lmhosts first. lmhosts lists all the ip adresses with their computer names in capitals. I hope thats right. I set up my windows 7 with the reg file from the samba wiki on windows 7 [URL].
That's great now I get the old screen from XP in windows 7 when joining the domain. I gave the machine netbios name MAINPC a smb trust account MAINPC and added the unix user MAINPC$ that should all work. I manage to successfully join it says welcome to domain, afterwards an error appears "changing the dns name of this computer to "" failed" and something bout not finding the domain controller. although I joined. then I resatart and when I try to log on it says "trust relationship failed". How to make it join and logon properly.
I have set up my Openvpn Server in Centos and it is working fine. Windows XP clients are able to connect the OpenVPN Server and access the network. This is a customized OpenVPN Gui Client. Now I need the customized OpenVPN Client for MS Windows 7Bit. I am using openvpn-2.1.4-install OpenVPN Client in MS Windows 7 64Bit. This is a executable and working fine in the said architecture. Now I want to compile this version. I am following the given steps at : [URL].. As per the direction i have copied the source from 2.1.4 and tried to compile, but compiled copy is giving the error " An error occurred Installing the TAP-Win32 Device Driver". I have tried this compilation by making every change and hack but all in vain.
I think that there are some certain steps which are missing and not documented any where. And sure that someone in forum will know the facts.
I am facing the problem in squid server. I configured the squid transparent and its
working fine and browsing but when the clients are configuring the ms outlook than squid is not allowing the smtp(587) and pop3(995) request. email send and recieve are failed.
I have configured samba in linux .i can share file from windows client. we are not using any domain or ldap. using workgroup only. kindly let me know is it possible to change the smbpassword from client.
View 1 Replies View RelatedI have been messing around with freenx to see if I can support my customer via remote desktop... I have installed the server on Ubuntu Karmic and the client on Windows 7. I love linux but need the windows computer for customer work and that is why I chose to install the client on windows. I setup the server the best I could and created custom keys which I then copied to windows and imported them to the freenx client. I am looking for security for my customer and that is why I chose custom keys... There are several issues to deal with but I want to just get started to see where it takes me. I added the test server computers ip address to the freenx client configuration and tried to connect to Ubuntu... I have left the port as 22 at the moment
Desktop setting on the client...I chose vnc which seems to be a good choice according to all the material I have been reading....Other settings I have left alone at the moment to see how things work.... All that said - I have the login window asking for information... I have the password asking for information....and I have the session wanting information....? Obviously I understand that login info can be set on the server and the password...but I haven't seen how to set up that? Of course I am testing the server from a client on my home network at the moment - but the customer has his own router as do I so those settings will need to be looked at as well.
I have one Windows-XP on Machin 1 and one Linux on Machine 2. I want make Linux machine as CVS server and Windows Xp as CVS client. How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
View 1 Replies View Relatedi have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).
View 2 Replies View Relatedi have an ubuntu server 4 windows client..i use putty or webmin. would like to copy some folders for example: "My houses"to be backup everynigth to the ubuntu server..can somebody give me an easy way for doing this with rsync and smb or cifs.
View 4 Replies View Relatedi installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies View RelatedI finished setup Samba PDC with Openldap backend. I can joint Winxp client to domain but can not change pass by press Ctrl + Alt + Delete and choose Change password button
This is my conf.
I used
samba3x-3.3.8
openldap 2.3.43
slapd.access.conf
Code:
access to attrs=userPassword,shadowLastChange,sambaNTPassword,sambaLMPassword
by dn="cn=Manager,dc=microhdesk,dc=net" write
by anonymous auth
by self write
by * none
[Code]....
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
I am not exactly newbie with GNU/Linux, but definitely new to SSH/NX stuffs. I followed the below tutorials for installing FreeNX so that I can access my desktop like TeamViewer in windows.
https:[url]....
https:[url].....
But I don't see the folder NX like the one mentioned here.Then edit the file /usr/NX/etc/server.cfg
I don't see a folder called NX to proceed. Also when I use nomachine client to connect from Windows, it couldn't connect and I get the below errors.
nxssh: <host-name>: no address associated with name.
how to make connect to freenx server from windows using nomachine client?
I would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies View RelatedI'm looking for a free backup solution how work in client-server in both environments Linux(server) and Windows(client). in my case, i want to give a disk space quota in my Linux server for each remote windows client.
View 2 Replies View RelatedI have setup a 389 ldap server on fedora 11 that works fine on linux clients. Now I want to connect windows xp clients on it. I made it using pgina, but I would like to make it work without third party software.
View 2 Replies View Related