I need help to run dual head (extended mode) on top of the followings.
1. RHEL 4.2
2. graphic card in Intel 945GM chipset
Anyone to guide me the driver and the configuration I should use.
Is there anything I can do in Ubuntu 11.04 to get the Intel 945GM to work more stable and run faster? It won't load the Unity interface at ALL. It won't load the Classic Desktop unless I use the one without effects, or else the title bars disappear. Is there something I can do to make it more stable, and run more efficiently?
View 4 Replies View RelatedI've been looking into this issue this whole afternoon, but I couldn't reach a definitive conclusion, so I decided to ask. Sorry if it's been explained somewhere else, I truly didn't manage to find it.
I'm running Ubuntu 10.04 on a laptop with Intel 945GM graphics controller. My laptop's screen native resolution is 1280x800. When I'm using only that, compiz runs fine.
When I connect a second screen -- a TV with native resolution of 1360x768 -- it doesn't work because the virtual screen resolution exceeds the maximum 3D texture size [2048x2048].
Lowering the resolution of both screens until the total size is less than 2048x2048 works, but it's really ugly and sacrifices a lot of screen real estate.
My question is: is there any way whatsoever to make compiz run only on my laptop screen and disregard the other one? An even better solution would be to run two instances of compiz, one for each screen, but I'll settle for having it on my laptop screen only, if possible.
The title pretty much speaks for itself. All options in Desktop Effects are greyed out and a docking application called Docky asks me to enabled composite effects for it to function properly.
I haven't made any driver installs or anything as I have a knack for breaking video configurations in Linux. Also this might have to do with the problem, I have no xorg.conf file for some reason. I did some searching around but that pointed me into installing packages that I already have :S.
When using the very nice opengl screensavers, rss-glx, etc. the screensavers are very choppy.I tried modifying my xorg.conf but still no go.Anyway to get the rss-glx screensavers to run at normal speed?I read online that Intel disable the hardware acceleration.This is a work laptop but I just wanted to see if I could get it going.
View 11 Replies View RelatedI have a Dell D620 and I can't use any screensavers. Rather, no screensavers work. Just for giggles, I booted a Kubuntu 11.04 CD, updated the sources.list, installed rss-glx and was able to use the rss-glx and other opengl screensavers. The reason I say opengl is because those are the ones that I use but no screensavers work.
View 2 Replies View RelatedI have a Dell Latitude D520 with an Intel 945GM Integrated Graphics Card. I have been unable to get the desktop effects to work in either Jaunty or Karmic. When selecting Normal/Extra/Custom, I get an error:
Code:
Desktop effects could not be enabled
Graphics card info:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 942/940GML Express Integrated Graphics Controller (rev 03) I've looked at countless threads pertaining to this issue, but nothing I could find resolved my issue.
I'm getting used to gnome3 one thing still bugs me- why when I switch workspaces on my multiple monitor machine does only the primary monitor change to a different workspace? The secondary monitor (my laptop screen) shows all open windows I put on it plus it's not even shown in the workspace list.
View 2 Replies View RelatedI'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict
HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.
When I try to run the 'system-config-display' program for Fedora 11 and I use the dual head tab, attempting to save the settings results in this:
Traceback (most recent call last):
File "/usr/share/system-config-display/xConfigDialog.py", line 212, in ok
if card.getDescription() == self.secondVideocardOptionMenu.get_menu().get_acti ve().get_data("NAME"):
AttributeError: 'NoneType' object has no attribute 'get_data'
And it won't save the data.
I've got a "little" problem with fedora 13: dual head with nouveau is not working. gnome-display-properties recognizes two displays and i can configure it (left, right, mirroring, ...) but first display is always in standby. Seems it doesn't get a signal from graphics controller. Desktop seems to work fine (can move the mouse pointer on the other screen into "the black hole"). I use Fedora 13 x86_64.
[Code]....
I've been troubleshooting a friends computer and we've pretty well hit a brick wall. The issue at hand is the video card will not output properly. To be specific, it's an NVidia card with both DVI and VGA ports. We want it to output via the VGA and ignore the DVI because there's nothing plugged in there (the monitor we want to use doesn't support DVI). At any rate, the only time we can get the VGA to work is when we have another monitor plugged into the DVI port and dual head the system. When we do this it also adds an extra "Unknown Monitor" to the display panel. When we just use the DVI the extra "monitor" disappears. now we don't want to have monitor sitting here useless just so we can use the vga out, but there seems little else to do. We tried installing the Nvidia proprietary drivers through the software manager and yum and it failed both ways.
This is really frustrating because it seems like it should be such a simple thing but nothing works. Does anyone else have similar issues? is there something i can do to fix this? I apologize if i've not provided enough info, but ask and i'll post anything you need to diagnose.
I've got a Toshiba R500 with a Intel 945 GM graphics card that in 11.2 worked perfectly with 2D and 3D drivers from Intel that were installed automatically via the install or yast update. With 11.3 I have the Intel 2D driver, but the 3D driver says "Unknown Classic (7.8.2)" when looking at the details through the My Computer icon on the desktop. I did some searching on these forums and google but haven't been able to find an answer, has driver support for the Intel 945 GM been removed because it's old hardware or is there just no driver in the repo's for 11.3 yet?
View 4 Replies View RelatedI did a fresh install of FC11. I have 2 Dell 22" widescreen monitors turned in portrait mode. The display preferences tool let me rotate the displays, but wont let me move them directly adjacent to each other, so I have what amounts to a "gap" between this displays. This is very annoying when dragginga window from one display to the other, as it disappears when it is in the gap, and causes a "delay" when just moving the mouse from one display to the other.The behavior I get when I try to drag the displays adjacent to each other, is that they will go anywhere EXCEPT adjacent...as in they will happily overlap or cover each other, or partially overlap diagaonally etc. Note that they will go adjacent when in normal rotation.
View 1 Replies View RelatedI want to install Scientific Linux 6 (RHEL 6 recompiled) and Fedora 14 KDE (side by side). Any step by step procedure to do so. Insofar I've failed dual boot any 2 fedoras.(I've heard that there is an issue with grub legacy, it can't dual boot .. is it so? hard to believe! So far I first installed SL 6 , installed its /boot on MBR and then installed Fedora KDE on other drive and installed its /boot on some other drive ... can't dual boot only getting SL 6 at booting. For both os I was using lvm for their primary drives.
View 4 Replies View RelatedI've just performed a fresh installation of openSUSE 11.3. System specs include GA-MA790X-DS4, PhenomII X4 940 AM2+, Sapphire RadeonHD 3670, two monitors. What I'm trying to accomplish is to set up my KDE desktop to (as it did under 11.2) use a multi-desktop multi-output non-cloned setup, so that I can use my two monitors side by side and maximize windows in either one respectively, etc.
So here I am with my newly installed system. Obviously I can't use fglrx, as it doesn't yet support the 2.6.34 kernel, so amdcccle is right out. SaX2, I notice, is gone. I have tried using KDE's built-in configuration tools, but the dual-head setup doesn't persist between logins. Strangely, windows that were open on the second monitor do vanish off-screen, but the monitors return to their overlapped positions so it's useless. Monitor 2 doesn't even retain its resolution setting. As one does, I decided I'd manually edit the X configuration file. SHOCK HORROR! No xorg.conf So what I'm driving at is this: How oh how do I configure my X.org to remember that it has two, quite different, monitors under openSUSE 11.3 ? Sorry if this post is hard to follow, I got very little sleep while trying to sort out the myriad problems I caused myself in upgrading.
I'm building another desktop. This is not a gaming system (though some video does cross my path), it's primary focus is as an application development platform. The thing is based on a SuperMicro two CPU motherboard with a couple intel multi-cores, 16GB RAM, a hardware RAID, and CentOS 5.6 (64bit). To this mix I would like to add a solid dual-head graphics card. Something that will support a couple HP LP2465 monitors (not new but functioning well). Speed of rendering is not my biggest concern, stability and "real estate" (the monitors are 1920x1200 and I want all of it).
I've looked a little at the Matrox items and started researching nVidia, but would like to hear opinions from those "in the know".The motherboard, though a solid performer, may have just made this trip unnecessary. It has a quirk that I hadn't considered before. It has several PCI-X slots (64-bit @ 133MHz) but only one "PCI-Express 1 (x8) on a (x16) slot". Does that seem a little strange to anyone else? Not that there is just one PCI-E but that it will fit a x16 board but will only support x8 connections...
I'm having a problem installing RHEL-5 on my system. I have Windows 7 installed so far on a Dell XPS workstation that came with hardware RAID 0. I have 2 x 500 gb hard drives. So I went in Win 7 and partitioned my disk to leave about 75 gb of unallocated space to install RHEL-5 on. I load the RHEL-5 DVD into my disk, restart my comp, and just follow installation steps. Use about 73 GB as an ext3 partition for the RHEL-5 and have about 2 GB reserved for swap space. RHEL-5 installs, and I'm all done. However, when I reboot the computer, the GRUB boot loader fails to load. I'm directly taken into Windows. How do I recover GRUB so I have the option of loading into RHEL-5?
View 9 Replies View RelatedIn this particular example I am using NoMachine's NX, although the behaviour also occurs when running VNC for instance. I'd like to connect from my laptop (1 physical screen), to my desktop at work (2 physical screen) via NX. It all works but the following problem occurs: When I connect with my laptop to my desktop I (almost) always am connected to the 2nd physical screen, whereas all windows appear on this first screen. I can interact with my desktop, use the task manager etc, see which windows are running, but any application I start, starts on the first screen (which I cannot see) and for the life of me I cannot move them from screen1 to screen2 without dragging them (which obviously is impossible since I only see screen2).The obvious workaround is: *before* you connect disable the second screen via the display manager but for me this is a non-pratical work around because it requires a lot of actions before heading home. how I can connect from a single-head desktop to a dual-head desktop without crippeling my desktop experience?
View 2 Replies View RelatedI'm using gnome in a dual-head setup with individual desktops. Is there any way to "jump" to another monitor using the keyboard only? Now the only method I know is to move the mouse pointer to the another screen and click on something there. Can I do something like that without using the mouse?
View 3 Replies View RelatedI am trying out conky for the first time and rather enjoying it. I have a small frustration though. I have a dual head setup and would like to have identical conky's showing on both monitors. I have tried creating two .conkyrc's (.conkyrc1 & .conkyrc2) and then using:-
Code:
$ conky -c config1
$ conky -c config2
to launch them, this results in only one of the two conky's displaying. I did at first think that maybe they were on top of eachother, but one conkyrc is set bottom_left, the other bottom_right so they should not be right??
When I try to run them as above terminal shows:-
Code:
gregg@burt:~$ conky -c config1
Conky: invalid configuration file 'config1'
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: forked to background, pid is 7017 .....
#NETWORK
${font Sans:size=9:weight=bold}${color grey}NETWORK ${hr 2}$color${font Sans:size=8:weight=bold}
${color grey} DOWNLOAD UPLOAD
${downspeedgraph eth0 30,115 000000 00ff00} ${alignr}${upspeedgraph eth0 30,115 000000 ff0000}$color
Processes 8 & 9 do not appear in my conky, just blank space between 7 & 10?? Also, the swap %age displays 'No swap%'?
I just installed lucid on my laptop with a second screen. Unfortunately, I cannot display any video. Neither on the laptop screen nor on the second external screen. In contrast, rebooting without attaching the external screen allows me to display videos again.
I never experienced this kind of behavior with Ubuntu 9.10.
Graphic card: Intel 945
Let me know if you need further information.
I have an Nvidia card that supports two monitors. Actually I have it setup. The problem I am having is I want to turn one of my monitors sideways so I can read forms easier. I can do this with just one monitor. RandR works fine with that. But it seems that when the system makes the two monitors into one long one it will not allow me to tweak the rotation in RandR.
Is there something I am missing. I deal with a lot of contracts and forms. And when I am reading them I hate scrolling. So I thought this could be an option. I have searched the net for 6 hours now. Maybe I do not know what I should be searching for.
Is this possible? I have 2 screens and I'd like to see if I can use the same panel on both sides.
View 1 Replies View RelatedCan any recommend a PCIe video card for my AMD64 box?Looking for one which basically has a good working driver:
- can do dual head using DVI and VGA output.
- open source preferably, I've used the nvidia proprietary one before, was fine but kernel upgrades became a pain.
- passive heatsink so it's silent, doesn't need to be a fast card since my other two were both onboard graphics.
- driver can do KMS for nifty high res console.
- most typical features work, so Mplayer plays nicely and can scale to full screen etc. (xv output +/- accelerated decoding)
- even a bit of light 3D for openarena or compiz would be nice.
- don't mind buying second hand if they aren't available new
I've had a Nvidia 7050 on board which was ok, fast enough, but upgrading with the proprietary driver became painful, and that motherboard is dying a flaky death.
- The nouveau driver looked promising, but wasn't really in Debian at that stage. But I did once accidently boot a high res console while testing a brand new kernel (2.6.31 I think) and was blown away Currently got an ATI RS880 [Radeon HD 4200] on board which is fine, 2D is fast enough, but the open source driver isn't finished yet. It can't do dual head (horrible distortion and crashes), can't suspend to ram (freezes), Xvideo and any form of 3D acceleration are missing.
I have two identical Samsung monitors. One is connected. to my motherboard VGA port (and appears as a Radeon HD 4200).The other is connected to a VGA port on a separate PCI Radeon 9200 PRO board. When I first installed Suse 11.3, I had to go through the nomodeset boot command (otherwise my system froze up on boot) and I only get video on the screen connected to the motherboard. The other monitor light. flashes which means it's not seeing a video signal. And, I do not have an xorg.conf file in /etc/X11.
So I did the following:
I did an Xorg -config which created an xorg.conf.new file which looked sensible in that it showed both Radeons, and appeared to set up a dual-head system. The only change I made was to change the driver for both controllers from radeon to radeonhd. Then, I copied xorg.conf.new to /etc/X11/xorg.conf and rebooted. And, nothing is changed. I still need to do nomodeset on boot and I still only get video on the screen connected to the motherboard. I'd attach the xorg.conf and Xorg.0.log files, but it says I can't add attachments to this post. I don't see any major errors in the Xorg.0.log file, but a lot of it is greek to me.
I have two Ubuntu 10.4 machines (and Ubuntu continues to hide more and more xorg.conf config such that I no longer know where to find it). One is a laptop running dual headed - DP1 is the internal screen, and VGA1 is an external monitor; both are running at 1600x900. The other machine is a desktop running both VGA1 and HDMI1 (which is actually a display port with a DVI adapter) at 1600x900. So in both instances my desktop is 3200x900. I run a VNC server on the laptop and connect to it (via SSH tunnel) from the desktop - when I press the full screen hot key, I get a 1600x900 view of the remote machine on one monitor, and half of my local desktop on the other monitor - the "full screen" only expands to fill one local monitor.
Normally this is exactly what you want when you full screen a web browser, email client, or other application. I'm sure there's some X magic to make it clear what a full screen actually entails, and the vnc client application is just dutifully accepting what it's told. While I would like to keep the normal full screen behavior for regular applications, but when I'm VNCing to another 3200x900 machine, I'd really like full screen to stretch across both local displays. Resizing the window to be "close" isn't quite good enough since I still have local panels at the top and bottom of one display (though I can set them to autohide), plus the VNC client application window border (since it doesn't appear to respect -notitle).
Is there any good way to have X lie to a single application about the "full screen" size? Can I get it to lie to all applications? xrandr --noprimary appears to have no effect.
I'm looking at the 2009 apple mac mini ([URL]and wondering if anyone has gotten dual head working? I'm putting two 17" or 19" monitors on, so nothing too adventurous. I know that I'll require the "Mini-DisplayPort-to-DVI" to get Dual DVI Adpaters, but I wanted to confirm that dual head would be supported from the start. I'm aware that there are issues with rebooting the device, possibly as a result of the wireless drivers. That doesn't bother me. Dual-head is a requirement I intend installing 9.10 and dual booting macos for firmware updates.
View 1 Replies View RelatedI have my computer set up to use separate x screens for both of my monitors and almost everything works perfectly. With this set up I don't have any problem displaying flash in full screen on either monitor like I had with twinview. I have it set up this way so that I can use my TV to display mythtv and still use my computer monitor to browse the web, etc. The only problem is that I use my iphone with hipporemote to give me a wireless keyboard/mouse. When using twinview this was not a problem as it was just one large desktop spread over two monitors.
However, switching to separate x screens seems to have broken the functionality of the vnc server. When using my physical keyboard and mouse I can just move the cursor off the side of monitor 1 to control monitor 2, however, if I'm connected via vnc the cursor gets "trapped" inside the active monitor. I can interact with each screen as expected but if I want to switch the mouse/keyboard focus to the other monitor I have to go to the computer and move the mouse to the desired monitor, which obviously defeats the purpose of using the iphone as a wireless remote.
So my question is this. Is there a way to assign a hotkey combination to switch the focus of keyboard and mouse that the vnc server is controlling? Or could I set the vnc server to only control one of the two x screens?
I am running CentOs 5.3 x86_64 on a Dell Latitude E6400 and can't get dual head to work.
My graphics card(s) are Intel Mobile 4 integrated (one in the laptop, one in the docking station)
My displays are two Dell 2208 WFP
I run the "Display settings" GUI and select "Dual head", "Spanning desktops" with the right card & monitor.
When I restart X it fails to start with stack trace in the /var/log/Xorg.0.log file (full log attached)
Backtrace:
My /etc/X11/xorg.conf is below.