Red Hat / Fedora :: Dual Boot RHEL-5 With Win 7 On RAID 0?
Feb 25, 2010
I'm having a problem installing RHEL-5 on my system. I have Windows 7 installed so far on a Dell XPS workstation that came with hardware RAID 0. I have 2 x 500 gb hard drives. So I went in Win 7 and partitioned my disk to leave about 75 gb of unallocated space to install RHEL-5 on. I load the RHEL-5 DVD into my disk, restart my comp, and just follow installation steps. Use about 73 GB as an ext3 partition for the RHEL-5 and have about 2 GB reserved for swap space. RHEL-5 installs, and I'm all done. However, when I reboot the computer, the GRUB boot loader fails to load. I'm directly taken into Windows. How do I recover GRUB so I have the option of loading into RHEL-5?
View 9 Replies
ADVERTISEMENT
Nov 26, 2010
I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.
I realize this is a common problem, but I have noticed people having success.
I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.
I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.
My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)
Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.
I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.
View 6 Replies
View Related
Jun 3, 2010
I'm having an issue with dual networking on RHEL 5. My initial question is can the order the ethx (0,1) devices are brought up be changed at boot time, so I could bring up eth1 before eth0?
Some background: eth0 is DHCP'd and using DNS, basically this is my primary network. eth1 is an isolated subnet, with a manually configured IP which has no connection to eth0 or the outside world. When I bring up networking it first brings up eth0 and then eth1, what happens is eth1 becomes the 'primary' network of the host and I lose my connection to DNS/NFS/NIS and the outside world.
If I login and manually bring up eth1 first, then eth0 everyone is happy and connections work. So, I'm looking for a solution to either bring up eth1 before eth0 or somehow make eth0 my primary IP and not have it be clobbered by eth1.
View 2 Replies
View Related
Sep 25, 2009
Environment:RHEL 5.2 and 5.4 AP x86_64, 2 drives (sda, sdb), installing without optional features like clustering and virtualization. I have tried this for a couple of days now and just can't get it to work. My goal is to take the RHEL 5.2 DVD and RHEL 5.4 DVD and install them on separate drives of the same machine. I want the grub menu to give me a choice. I prefer to understand the steps and choices offered me by the install dialog to do this rather than fiddle with grub.conf. If that is not possible, I will write up the bug.
So far, I just get the the error 13 when trying to start the grub added second OS. I have read elsewhere that "Anaconda frequently recognizes the other operating system and sets up grub so you can boot from either operating system". That would be nice. The install dialog lets me choose a drive to install to. I have figured out that I need to check "review and modify partitioning layout" to enter the advanced grub choices. Do I have it install a boot loader for the 1st OS? Trying to add the 1st OS during the second OS install creates a grub conf with no kernel line in the added boot stanza.
View 3 Replies
View Related
Sep 15, 2010
It's been a real battle, but I am getting close.I won't go into all the details of the fight that I have had, but I've almost made it to the finish line. Here is the set up. ASUS Z8PE-D18 mother board 2 CPU, 8 Gig Ram. I recently added an OCZ Agility SSD, defined a raid 1 virtual disk on the 1 terabyte WD HDD drives, which will holds all of my user data, the SSD is for executables.The bios is set to AHCI. Windows 7 installed fine, recognizes the raid VD just fine.
I installed Ubuntu 10.04 by first booting into try and mode, then opening a terminal and issuing a "sudo dmraid -ay" command. Then performing the install. I told it to install the raid components, and told it to let me specify the partitions manually. When setting up the partitions, I told it to use the free space I set aside on the SSD from the Windows 7 install as ext4 and to mount root there. Ubuntu installed just fine, grub2 comes up just fine, and Windows 7 boots with out a hitch, recognizing the mirrored partition as I indicated previously. When I tell grub to boot linux however, it pauses and I get the "no block devices found" message. It will then boot, but it does not recognize the raid array. After Ubuntu starts up I can run "dmraid -ay" and it recognizes the raid array, but shows the two component disks of the raid array as well. It will not allow the component disks to be mounted, but they show up which is annoying. (I can live with that if I have to)
I have fixed a similar problem before by setting up a dmraid script in /etc/initramfs-tools/scripts/local-top ... following the instructions found at the bottom of this blog:[URL].. To recap: My problem is that after grub2 fires up Ubuntu 10.04.1 LTS (Lucid Lynx), it pauses, and I get "no block devices found" It then boots but does not recognize the raid array untill I manually run "dmraid -ay". I've hunted around for what to do but I have not found anything. It may be some timing issue or something, but I am so tired of beating my head against this wall.
View 4 Replies
View Related
May 10, 2009
I want to Install RHEL 4.7 64 bit on one my server (Supermicro Super Server) having RAID controller1. Intel2. AdaptecWe are using Adaptec.We are using RAID 1 with 2x320GB Hard disksPOINT: If we Install RHEL 5.3 it recognize RAID controller and show single Logical volume of 298 GB, Means working fine but when we try to install RHEL 4.7 it shows two hard disks of 298GB and 298GB,meanz its unable to recognize RAID controller.So, the issue is Driver of it, CD which we got from super micro having driver for RHEL 4 to RHEL 4 update 6We are making our DR site and its necessary for us to Install RHEL4.7 to make it identical.I searched a lot and spent more than three days on it continuously, And still unable to find the solution.
View 9 Replies
View Related
Apr 17, 2011
I have (3) 60GB SSD. I want to use (2) in RAID 0 for Ubuntu and (1) alone for Windows 7.
What is the best way to get about this? I know how to create the RAID 0 array with the (2) disks and install Ubuntu on it. But how do I get the RAID array with Linux on it to dual boot with Windows 7?
Linux - RAID 0 (2) SSDs
Windows 7 - (1) SSD
View 3 Replies
View Related
Mar 4, 2010
I set up an array of 2 hhd in raid0 using intel ICH7R, and i have a win7 installed on it. I'd like to have a dual boot with karmic, too. I googled a little bit and i found that it's not so easy as i thought. Are there anyone who's experiencing my same situation?
View 1 Replies
View Related
Mar 21, 2010
Is it humanly possible to have a dual boot system and have it in RAID 0
I have three Hard drives.....
The three drives that I have are250GB IDE
1TB Sata
1TB Sata
And I edit . produce a lot of music/videos
What I am looking to do it have my 250Gb IDE drive as my Operating system (partitioned in two or something, one for Windows Another for Ubuntu)
And I would like when I am on either Operating System (ubuntu/windows_7)
its see's ,my computer as having a 2TB HDD (setting the two 1TB HDD's in RAID 0 )
So in Laymans... 250GB for OS's and 2TB (2 x 1TB HDD) as DATA drives
View 1 Replies
View Related
Mar 24, 2010
Currently I have windows 7 x64 installed on a pair of raided ssd's using an x58 motherboard(ich10r) and I want to duel boot ubuntu x64 (either 9.10 or 10.04) on another harddrive (not part of the raided ssd's). Does anyone know if this can be done? I haven't found anything out there about this. I have tried to install Ubuntu from the CD. It gets to the install screen booting from the CD, but it doesn't let me install or try Ubuntu. I hit enter and nothing happens. I can look through all of the options but can't install or boot into Ubuntu.
View 1 Replies
View Related
Jul 31, 2010
I was trying to dual boot ubuntu on my desktop which has windows 7 already installed on it with raid 0. I have 2 500GB hard drive and when I boot from cd and try to install ubuntu it only detect one of my hard drives and it said I only have 500GB and there is no OS installed on this machine! I look online but I couldn't find any solution!
View 9 Replies
View Related
Jan 13, 2010
I did some linux installation in the past but never get along with it. now I decided to give it another shot because I need it for the information security class I'm taking.
I have a gigabyte ga-p35-ds3 with 2 WD 320GB HD on a raid 0 array (motherboard raid). I have windows 7 x64 already installed on the raid and would like to install ubuntu 9.10 x64 dual boot with it.
The problem is that the installation does not recognize the win7 on the disk, it does recognize the raid as 1 640GB disk but with nothing on it so I can't processed with the installation without loosing the win7 installation with everything on it.
another weird thing is that after I quit the ubuntu installation and restart the computer the raid 0 fail to load. after I shutdown the computer and start it again the raid is up again and the win7 loading ok.
I have to install it in a dual boot with win 7 without reinstalling everything from scratch.
View 2 Replies
View Related
Feb 11, 2010
I just installed SUSE 11.2 as dual-boot with WinXP on an older system that has a 160GB PATA drive and a 500GB SATA RAID drive. I left about 80GB on the PATA drive unpartitioned to accommodate SUSE. During the initial installation attempt, SUSE was determined to install on the RAID drive instead of the PATA drive, so I disabled the SATA drivers in the BIOS to force the installation on the PATA drive. This was successful, but now there is no access to the RAID drive from SUSE because there is no driver and it is not mounted. I reactivated the SATA drivers in the BIOS and the RAID drive reappeared in WinXP with everything intact. The SATA drives now appear in SUSE under Hardware Information as "/dev/sdb" and "/dev/sdc" and the listed driver is "sata_sil".
So how do I get the RAID drivers installed in SUSE and then mount the drive so it can be browsed/modified from Dolphin? I would also like to be able to browse/change this drive from other computers on my home network through samba, just like with WinXP.
View 9 Replies
View Related
Sep 29, 2010
Ive created two RAID0 partitions on my drives, a 500GB and a 60GB. Im trying to install Ubuntu on the smaller partition (ive already put Win 7 on the larger one) and every time when i get right to the last part of installation it says Grub couldnt be installed. "the grub package failed to install in arget......."
View 1 Replies
View Related
Oct 21, 2010
I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."
After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.
[Code]...
View 9 Replies
View Related
Jun 2, 2011
I am currently with Wubi 10.04 under Vista and my Dell XPS 630i has a 1 TB Nvidia RAID controller.First image (Option A) suggests /dev/sda as device for boot loader installation, while second image (Option B) suggests /dev/mapper/nvidia_bcidhdja.I think that the way of keeping the RAID would be using Option B as the device for boot loader installation. Would Option A break the RAID instead?
View 1 Replies
View Related
Jan 8, 2011
I have a pre-existing setup with Windows XP Professional and CentOS5.5 on a dual boot setup with the Linux drive setup as the primary drive hosting the grub menu.
I am replacing these machines with new updated ones and they have windows setup on a RAID0. I think it would be easiest to follow my previous setup and move the RAID to secondary SATA ports and put the linux drive on the primary SATA port, or should I just change the boot order in the BIOS to have the secondary linux drive boot first?
can I move a RAID setup to secondary controller ports without breaking the RAID?
View 1 Replies
View Related
Sep 13, 2010
I'm having serious troubles to install ubuntu-10.04.1. My raid is an hardware raid with intel chipset. Note that win7 is already installed and working with my raid. I made some space from windows, to install Ubuntu (40gb). First, I run the installer, everything seems to be fine. I choose to install Ubuntu were there is the most space free (sorry, I'm not sure about the real terms used there).
Then my partition with the vista loader appears. So the installer can see my raid, and should work fine (everything is detected correctly). But once I'm in the end of the installation (around 95%), a pop-up appears, and tells me that Grub can't install in /dev/sda and it's a fatal error. I can choose an another destination, but it doesn't seems to work.
View 9 Replies
View Related
Mar 21, 2011
I want to install Scientific Linux 6 (RHEL 6 recompiled) and Fedora 14 KDE (side by side). Any step by step procedure to do so. Insofar I've failed dual boot any 2 fedoras.(I've heard that there is an issue with grub legacy, it can't dual boot .. is it so? hard to believe! So far I first installed SL 6 , installed its /boot on MBR and then installed Fedora KDE on other drive and installed its /boot on some other drive ... can't dual boot only getting SL 6 at booting. For both os I was using lvm for their primary drives.
View 4 Replies
View Related
May 16, 2010
hey guys i am trying "again" to dual boot on my gaming computer, and i am failing miserably. i boot the cd, it detects the hard drive i set the partitions and press finish and either on the partitioning or the files copying the installer crashes. what can i do to make it work with raid 0 (nvidia chipset).
View 5 Replies
View Related
Feb 23, 2011
I am attempting to install Maverick on an older pc. It has (2) mirrored 153 GB SATA drives. I set aside 33GB for a linux partition, by shrinking the partition in Vista.
Choosing to "Install along side windows" is not an available option. I can only choose use who disk, or use empty area. I choose use the empty area, and the Ubiquity installer gets hung up when attempting to format the empty space as EXT4. When I scroll up on the output I notice some error messages referencing NTFS. When I use Gparted it shows a possible problem.
Quote:
Warning:
The device /dev/sda1 doesn't exist
ntfsresize v2.0.0 (libntfs 10:0:0
ERROR(2):Failed to check 'dev/sda1' mount state: No such
file or directory
Probably /etc/mtab is missing. It's too risky to continue. You
might try an another Linux ditro.
Unable to read the contents of this file system!Because of this some operations may be unavailable.
The following list of software packages is required for ntfs file system support: ntfsprogs.
I ran chkdsk /r on the Vista partiton, in case there was a problem there. The issue still persists.
View 2 Replies
View Related
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
May 28, 2011
I've recently had trouble reinstalling my Ubuntu system as I was getting various unusual errors as described in my old thread here. I thought it was probably something to do with my RAID-0 array which was pre-installed on my laptop from purchase being corrupted or something like that (if it's possible). I decided to simplify things for myself (not understanding RAID arrays much) so I just removed the RAID array and installed Windows and Ubuntu on the now separate hard disks. It worked fine.
I noticed quite a significant performance drop, however, with even Ubuntu boots taking longer than 30 seconds despite my laptop being both high-spec and only a few months old. Windows, as you can imagine, was dreadfully slow. I wasn't entirely convinced that this was entirely due to the loss of the RAID array - as even low-spec laptops with presumably no RAID arrays are supposed to boot Ubuntu in under 30 seconds apparently - but I read that RAID-0 arra
View 8 Replies
View Related
Nov 2, 2010
I need help to run dual head (extended mode) on top of the followings.
1. RHEL 4.2
2. graphic card in Intel 945GM chipset
Anyone to guide me the driver and the configuration I should use.
View 1 Replies
View Related
Apr 27, 2009
I have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies
View Related
Apr 22, 2010
how to create RAID-1 in rhel-5
View 2 Replies
View Related
Feb 5, 2010
I just did a fresh install of an RHEL 4 on a Fujitsu Primergy server.
However when i try to boot, the machine restarts all over again.
The kernel version is: 2.6.9-42 The server use an intel Xeon processor with Sata Disks and an LSI MegaRaid controller.m.
View 9 Replies
View Related
Apr 15, 2011
Have a customer who is due for a new system. AS they just renewed their RHEL entitlement, they plan on ordering a Dell server without a OS preload. Two questions:
- Will RH let them download RHEL6 just by maintaining the entitlement when their current version is RHEL 3?
- The server will have two RAID arrays - one intended for /home, one for "everything else". As I've never done a clean load with two arrays, how do I select what file systems go on which array?
View 3 Replies
View Related
Sep 14, 2010
I just started testing a redhat enterprise linux 5 installation. This installation took place in a Latitude D630 labtop which currently has Ubuntu Desktop in (sda1) and Ubuntu Server in (sda3). My goal was to install Redhat Enterprise Linux 5 into (sda4). Both of the Ubuntu installation boot fine and work, but when I try booting the RHEL it shows a panic in the loading phase as follow VFS: Cannot open root device "sda4" or unknown-block(0,0)Please append a correct "root=" boot optionKernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)I am wondering what this means, maybe some of you would have a better clue than I do
View 2 Replies
View Related
Dec 14, 2010
I wanna configure RAID 1 within TWO HDD in RHEL-5 during installation moment .I have the following questions regarding software raid vs hardware raid :
1) What is the basic difference between hardware and software raid
2) In software raid , If I use two HDD as RAID1 , then if one HDD is failed , can I boot it from another HDD ?
3)In software RAID , Between two HDD , If One HDD is failed then if I remove bad HDD and add a spare HDD then is it automatically synchronized with FIRST HDD ?
4) In software raid is it possible to keep '/boot' partition in two HDD (I use 2 HDD as RAID1) as separate partition ?
5) Finally is there any documnets or sites where I get software raid configuration during INSTALLATION moment in using GRAPHICAL mode , plz give me the address.
View 1 Replies
View Related
