Fedora :: Cannot Save Dual Head Settings In System Config Display
Jul 8, 2009
When I try to run the 'system-config-display' program for Fedora 11 and I use the dual head tab, attempting to save the settings results in this:
Traceback (most recent call last):
File "/usr/share/system-config-display/xConfigDialog.py", line 212, in ok
if card.getDescription() == self.secondVideocardOptionMenu.get_menu().get_acti ve().get_data("NAME"):
AttributeError: 'NoneType' object has no attribute 'get_data'
And it won't save the data.
View 4 Replies
ADVERTISEMENT
Jan 13, 2010
I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
View 2 Replies
View Related
Jul 4, 2010
I recently installed Fedora 13 64 bit with KDE and everything works perfectly with the exception of display properties. I have two monitors which I have setup as multiple displays here is the result of xrandr when all is good.
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
VGA-0 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 310mm x 230mm
1280x1024 60.0*
1152x864 75.0
1024x768 85.0 75.1 75.0 70.1 60.0
832x624 74.6 75.0
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 66.7 60.0
720x400 87.8 70.1
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 271mm
1680x1050 60.0*+
1280x1024 75.0 60.0
1440x900 59.9
1280x800 59.8
1152x864 75.0
1280x720 60.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
However when I log out and back in it reverts to cloned displays with xrandr output
Screen 0: minimum 320 x 200, current 1152 x 864, maximum 8192 x 8192
VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 310mm x 230mm
1280x1024 60.0
1152x864 75.0*
1024x768 85.0 75.1 75.0 70.1 60.0
832x624 74.6 75.0
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 66.7 60.0
720x400 87.8 70.1
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 433mm x 271mm
1680x1050 60.0 +
1280x1024 75.0 60.0
1440x900 59.9
1280x800 59.8
1152x864 75.0*
1280x720 60.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
I'm have an ATI Radeon 3450 HD graphics card and I believe I installed the mesa driver as the proprietary one simply won't install.
View 3 Replies
View Related
Jun 17, 2010
I have just installed KDE 4.4 on Fedora 12 in addition to GNOME. The default Display resolution is the highest available. I changed it to a lower resolution. However, when I reboot, the resolution switches back to the default setting.
View 10 Replies
View Related
Jun 18, 2010
I've been troubleshooting a friends computer and we've pretty well hit a brick wall. The issue at hand is the video card will not output properly. To be specific, it's an NVidia card with both DVI and VGA ports. We want it to output via the VGA and ignore the DVI because there's nothing plugged in there (the monitor we want to use doesn't support DVI). At any rate, the only time we can get the VGA to work is when we have another monitor plugged into the DVI port and dual head the system. When we do this it also adds an extra "Unknown Monitor" to the display panel. When we just use the DVI the extra "monitor" disappears. now we don't want to have monitor sitting here useless just so we can use the vga out, but there seems little else to do. We tried installing the Nvidia proprietary drivers through the software manager and yum and it failed both ways.
This is really frustrating because it seems like it should be such a simple thing but nothing works. Does anyone else have similar issues? is there something i can do to fix this? I apologize if i've not provided enough info, but ask and i'll post anything you need to diagnose.
View 2 Replies
View Related
Jun 29, 2010
I did not have any /etc/X11/xorg.conf, so I read on these forums that system-config-display would create one for me. I ran system-config-display and it created an xorg.conf. But now my display is all messed up!! So, I deleted the xorg.conf and nothing changed. Why on earth would the display still be messed up if I deleted the file that was causing it?? Does system-config-display change somethign else?
View 14 Replies
View Related
Jun 19, 2010
I just installed lucid on my laptop with a second screen. Unfortunately, I cannot display any video. Neither on the laptop screen nor on the second external screen. In contrast, rebooting without attaching the external screen allows me to display videos again.
I never experienced this kind of behavior with Ubuntu 9.10.
Graphic card: Intel 945
Let me know if you need further information.
View 2 Replies
View Related
May 9, 2010
Is this possible? I have 2 screens and I'd like to see if I can use the same panel on both sides.
View 1 Replies
View Related
Feb 3, 2011
I have two Ubuntu 10.4 machines (and Ubuntu continues to hide more and more xorg.conf config such that I no longer know where to find it). One is a laptop running dual headed - DP1 is the internal screen, and VGA1 is an external monitor; both are running at 1600x900. The other machine is a desktop running both VGA1 and HDMI1 (which is actually a display port with a DVI adapter) at 1600x900. So in both instances my desktop is 3200x900. I run a VNC server on the laptop and connect to it (via SSH tunnel) from the desktop - when I press the full screen hot key, I get a 1600x900 view of the remote machine on one monitor, and half of my local desktop on the other monitor - the "full screen" only expands to fill one local monitor.
Normally this is exactly what you want when you full screen a web browser, email client, or other application. I'm sure there's some X magic to make it clear what a full screen actually entails, and the vnc client application is just dutifully accepting what it's told. While I would like to keep the normal full screen behavior for regular applications, but when I'm VNCing to another 3200x900 machine, I'd really like full screen to stretch across both local displays. Resizing the window to be "close" isn't quite good enough since I still have local panels at the top and bottom of one display (though I can set them to autohide), plus the VNC client application window border (since it doesn't appear to respect -notitle).
Is there any good way to have X lie to a single application about the "full screen" size? Can I get it to lie to all applications? xrandr --noprimary appears to have no effect.
View 2 Replies
View Related
Aug 16, 2011
Configure the HTTP server via system-config-httpd brings up some nice gui.I start a console, login to root and start it with: system-config-httpdGoto tab Virtual Hosts, then addI name my Virtual Hosts "sea", set its document root to: /home/sea/webs/sea.hs/www
where index.php is located for that 'local test server'.Host information is on Name based Virtual Host.But what do i have to enter for IP Adress and Host Name? Neither of these accept 127.0.0.1 nor localhost Further, when i try to exit, it wont let me close the app.Its not saved, hence i can even delete the default virtual hosts and its there again after restarting the app Even with adding sea /home/sea/webs/sea.hs/www or sea localhost.localdomain localhost to /etc/hosts doesnt change anything
View 4 Replies
View Related
Mar 8, 2010
My machine is a new Fedora Core 12 install. The install did not make an /etc/x11/xorg.conf file by default, which is odd. So, I want to change things with the display. But there's no "system-config-display" in /usr/bin. What's going on? Why wasn't this installed by default? I've had lots of other problems with X on this machine as well:
the 10x20 fonts were missing XFree86-Misc error messages whenever I start an xterm I also receive these warnings, intermittantly, when I create xterms:
Code:
Xlib: extension "XFree86-Misc" missing on display ":0.0".
xmodmap: please release the following keys within 2 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 4 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 8 seconds:
Control_L (keysym 0xffe3, keycode 37)
With this many problems I want to know if there's something in general broken with X on FC12, or was that just my install, or what?
View 6 Replies
View Related
Dec 29, 2008
FC10/KDE system-config-display won't run and no error messages in /var/log/messages
# system-config-display
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 312, in <module>
[code]...
View 8 Replies
View Related
Dec 28, 2010
I'm trying to configure Debian to have a spanning desktop with two monitors. One is VGA, and the other is Display Port. They are both with the video hardware on the motherboard, an Intel 4 Series Chipset Graphics Controller. This is the output I get when I do a query on xrandr:
Code:
Screen 0: minimum 640 x 480, current 1600 x 1200, maximum 1600 x 1200
default connected 1600x1200+0+0 0mm x 0mm
[code]...
View 4 Replies
View Related
Jun 29, 2009
I just updated from Fedora 8 to 10 to 11 today. When I run system-config-display I get the following message:
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 33, in <module>
import rhpxl.monitor
ImportError: No module named rhpxl.monitor
If I comment out that line, the next one fails, and so on. I installed a newer package, 1.1.3-2.fc11, because I thought maybe the installer didn't put it on and that behaves the same. Why this won't run? I would desperately like to use my widescreen monitor and I'm hoping that 11 will finally support my intel graphics correctly.
View 14 Replies
View Related
Jun 17, 2010
When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now
View 5 Replies
View Related
Mar 2, 2010
When I installed F11 it didn't have the i810 driver so it defaulted to VESA. I upgraded to F12 using preupgrade and thought it would re-detect the graphical hardware and didn't. I want to recreate xorg.conf for my computer (Toshiba Satellite A45-S25) so I can use Compiz and some 3D application but I can't find system-config-display. It's missing from the system and I don't know what package it belongs to so I can't re-install it.
View 2 Replies
View Related
Feb 2, 2011
I can't change my screen resolution but my fedora doesn't have system-config-display. Trying to install this package and for some reason it is not listed under the add/remove software, and yum says it can't find it either.
# yum install -y system-config-display
results
No package system-config-display available.
Error: Nothing to do
Searching in the add/remove software I found some others such as system-config-firewall, system-config-date and etc but it doesn't have system-config-display. Is there any other way to install this package? currently running kernal linux 2.6.35.9-64.fc14.x86_64 , fedora 14 on 64 bit system gnome 2.32.0
View 8 Replies
View Related
Jun 29, 2010
when I set my screen size (e.g., to 1680X1050) to anything other than the default, it won't save the change permanently. It means I have to change it each time I start OpenSuSE.
View 9 Replies
View Related
May 16, 2010
When I change the display resolution and refresh rate in system settings, those values will be reset to default every time I restart the computer. Is there a way to save the values, so that I don't have to change them again every time? I use Kubuntu 10.4. Another problem I have is that when I choose Leave / Sleep (Suspend to RAM), the computer will sometimes be locked, so that it never wakes up again. I can hear when this occurs, because then the cooling fan(s) will stay on. Normally, when Sleep works, the fans are turned off, because the computer goes into energy saving mode. i noticed the occasional sleep problem already in Kubuntu 9.10.
View 2 Replies
View Related
Oct 6, 2010
I have seen posts on the fact that dual screen configuration seem to be a nightmare with opensuse 11.3. As a few already mentioned, it worked all fine with 11.2 and now we are back to. I have two screens attached to my laptop: the standard LVDS and one HDMI high res monitor. It works fine to configure it once but it is NEVER SAVED so I have to do this at EVERY boot. Even more annoying: when the slid is closed, my laptop goes into "no display mode" (black screens) and when it tries to come back to life (opening the lid again) everything is screwed (to use a nice word).
View 3 Replies
View Related
Oct 6, 2010
I have two identical Samsung monitors. One is connected. to my motherboard VGA port (and appears as a Radeon HD 4200).The other is connected to a VGA port on a separate PCI Radeon 9200 PRO board. When I first installed Suse 11.3, I had to go through the nomodeset boot command (otherwise my system froze up on boot) and I only get video on the screen connected to the motherboard. The other monitor light. flashes which means it's not seeing a video signal. And, I do not have an xorg.conf file in /etc/X11.
So I did the following:
I did an Xorg -config which created an xorg.conf.new file which looked sensible in that it showed both Radeons, and appeared to set up a dual-head system. The only change I made was to change the driver for both controllers from radeon to radeonhd. Then, I copied xorg.conf.new to /etc/X11/xorg.conf and rebooted. And, nothing is changed. I still need to do nomodeset on boot and I still only get video on the screen connected to the motherboard. I'd attach the xorg.conf and Xorg.0.log files, but it says I can't add attachments to this post. I don't see any major errors in the Xorg.0.log file, but a lot of it is greek to me.
View 5 Replies
View Related
Sep 4, 2010
I installed fedora 13 in its LXDE flavor in my laptop. I noticed when it goes to save energy mode, the TFT retro-illumination is not turned off. The display just stays black with light. How to make the display to turn off when the system enters in save energy mode?
View 4 Replies
View Related
Jul 29, 2010
I have a netbook with ubuntu 9.10 and i have to change the display settings very often (external display @ home and a projector in school ) is there a way to save them and then load them with a script when needed?
View 2 Replies
View Related
Mar 3, 2010
Now that I have system-config-display installed I tried to create a new xorg.conf so I can have 3D acceleration, etc using the correct driver. But the xorg.conf file generated does not work. It locks up the laptop (Toshiba Satellite A45-S250). I don't understand why this happens because the Fedora 12 Live CD (for i686) works find on boot.
I tried looking for the xorg.conf file after booting the live CD but it doesn't exist. I don't understand what is happening here. Also, when I used an older version of Fedora (8 I think) the X driver was i810 which worked fine. It gave me all the 3D acceleration, etc. When I installed F11 it gave me a dumbed down install using the VESA driver. What happened to the i810 driver? Why does the intel driver not work? Why does the Live CD work great but an installed system not?
Necessary info: Toshiba Satellite A45-S25 Fedora 12 (preupgraded from F11)
View 1 Replies
View Related
Aug 29, 2010
Kubuntu 10.4DVI-0 SyncMaster931BFDVI-1 BenQ G2220HDAI set the monitors with Display SettingsEverything works fine until rebootI lose my settings and always returns to the initial state
View 4 Replies
View Related
Mar 15, 2011
I'm trying to create a cname in system-config-bind. I can create the record but when I go to save it I get a "Zone file save error".
Here's the full output:
Save of Zone file var/named/chroot/var/named/plantsareperfect.com.db failed
dns_master_load_/var/named/chroot/var/named/plantsareperfect.com.db:10lantsareperfect.com:cname and other data (sorry, the rest is off the page and I cant see it)
Why I can't save this cname?
View 6 Replies
View Related
Aug 16, 2010
Not sure why but I keep on getting the ERROR: Path is not writable when I'm trying to add a Slave Zone.
The server was commissioned by someone else and I remotely installed GNOME group, and vncserver as per the official CentOS instructions here.
Initially I tried using a normal (ie non root) user's credential for my VNC session. However, instead of asking me for my root password when I tried to open system-config-bind, it just doesn't load up. I ended up allowing the user "root" to connect to the server remotely via VNC, and was able to get system-config-bind to start.
However, I am now unable to save the settings, despite having done:
Code:
View 3 Replies
View Related
Nov 2, 2010
I need help to run dual head (extended mode) on top of the followings.
1. RHEL 4.2
2. graphic card in Intel 945GM chipset
Anyone to guide me the driver and the configuration I should use.
View 1 Replies
View Related
Jun 1, 2011
I'm getting used to gnome3 one thing still bugs me- why when I switch workspaces on my multiple monitor machine does only the primary monitor change to a different workspace? The secondary monitor (my laptop screen) shows all open windows I put on it plus it's not even shown in the workspace list.
View 2 Replies
View Related
Jul 5, 2010
I'm interested to hear what config/settings files - or whole folders - you've managed to simply copy over from your previous installation and have working in the new. This can be either for specific programs or for parts of the system, but I suppose most of what people would find useful is getting some of their programs back to how they had them. These can be individual files or whole folders, but if there is a settings folder for a program but only one of the files is actually worth copying, just mention the one file and what it does. Also interested in hearing from KDE and Xfce users, for the benefit of those of us who have multiple desktop environments in the same system. (Besides, even those with only Gnome will use some of the great KDE apps like Amarok and K3b).
Here are my contributions:
(~/ denotes your home folder; any subfolders starting with a period [.] are hidden files or folders)
~/.cache/rhythmbox/covers (the folder containing all your album cover art displayed in Rhythmbox)
~/.gnome2/nautilus-scripts (any scripts you added to Nautilus will be in this folder)
~/.lyrics (the folder containing all your song lyrics displayed in Rhythmbox)
~/.local/share/rhythmbox/rhythmdb.xml (Rhythmbox's database file; if you were forced to edit this because of some incorrectly displayed tags, don't forget to copy it over).
~/.gconf/apps/rhythmbox/plugins/ (Rhythmbox's plugins folder; plugins should be accessible when you restart Rythmbox).
~/.bash_aliases (Terminal command aliases you may have created will be in this file).
~/.gconf/apps/nautilus/preferences/%gconf.xml (Nautilus folder preferences file)
~/.mozilla/firefox (Folder for Firefox settings, cache, bookmarks, etc. If there are 2 or more subfolders with names like 2tb4r91t.default just copy over the latest one, and make sure profiles.ini points to it)
~/.thunderbird (Mozilla Thunderbird folder with all accounts, emails, settings, etc)
View 3 Replies
View Related
