I believe the Nvidia drivers were installed by default.. as I run the command:
I get:
However, when I do nvidia-settings, I get "command not found".
How do I see if the proprietary Nvidia drivers are installed?
Also, with GNome (on Ubuntu for sure), I can see a GUI tool to configure my NVidia settings.. how do I access this tool with KDE?
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies View RelatedTo use games and other intensive applications, but with the switch I completely lost control of the brightness for the monitor. Is their a way to configure that, through the terminal or external application. If not, is there an experimental 3d version of nouveau I could try. Help would be appreciated, everything else works great so far.
View 2 Replies View RelatedUsing online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
I just bought an LG E2250V Monitor that I'm connecting to my laptop with the VGA port, my laptop is equipped with the cardCode:01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)However nvidia-setting is able to detect resolution only up to 1024x768, I can't get higher than that, and it doesn't even display the monitors name.Information:
Operating System: Linux 2.6.35.10-74.fc14.x86_64
NVIDIA Driver Version: 260.19.29
Server Version Number: 11.0
[code]....
How do I do this? You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
View 3 Replies View RelatedI plugged the usual 4-pin s-video cable into my TV and graphics card. I went to nvidia x server settings, nothing. I hit detect monitors, nothing. I changed the TV to the proper input channel, Nothing. It's a bit annoying,I used it with the old GeForce Ti4200.
View 1 Replies View RelatedI'm on a 64-bit machine running Debian 8.2 "Jessie" with MATE Desktop Environment.
I have a Geforce GTX 650ti video card.
I'm logged in as a non-superuser account named "john."
I open NVIDIA X Server Settings GUI, change my monitors' brightness from 0.000 to -0.1, go to the "nvidia-settings Configuration" section, click "Save Current Configuration" and click "Quit."
But when I reboot, the brightness is back at 0.000.
[URL] .....
I am extremely disappointed in this 11.3 release. openSUSE had a system that worked. I never had a major problem with the Nvidea video drivers before this release. When I did have a problem with the drivers (usually because Nvidia screwed up) I was able to easily use "The hard way" to install the drivers and all was good. But now the system is so screwed up that the drivers wont install. I can't find a working Saxx2 anywhere. nvidia-settings won't install from rpm. What the hell is going on? This release should have been held up until this garbage was fixed. Novvaeu (sp?) won't work for some of the programs I want to run.
I probably changed so much stuff that I bet my system won't boot now. Oh and what happened to the lack of repair software on the install disk? For two versions now the only repair option we have had is the command line. That's great if you use those tools on a regular or semi regular basis.
For some reason the nvidia-settings configuration utility entry vanished from the menu after an update, the problem happened again after a recovery via a clonezilla hdd image also after an update, has anyone got any idea's as to recover the entry and how to stop this issue arising in the future?
View 4 Replies View RelatedI recently installed Ubuntu, 10.4
My problem is that when i log in, the resolution isnt what i want. So i change it via the Nvidia x server settings, and press Save to x config file
Yet when i log in again, it defaults back to what it was before i changed it?
Iv looked all over the internet for the past 2 days and nothing seems to work.
I'm running dual-screen. On 24" at 1920x1080 and one 19" at 1440x900. After installing Mint 9 I can't set the resolution any higher than 640x480 in nvidia-settings. I've installed the "recommended" nvidia-driver that Mint suggests.
[Code]...
What could be the problem? Why can't I set the res higher than 640 in nvidia-settings? Everything worked in Mint 8 (10.04). During installation the res was higher than 640.
i'm having a problem with nvidia-settings is that my resolution is not listed in. the only resolutions available are 640x480 and 320x240, the "detect display" doesn't work either.by the way i'm using the driver from nvidia site.other point is that i couldn't change resolution on kde before i installed the nvidia driver, it just showed the same two resolutions, i thought it was because i hadn't install the nvidia drivers but i got the same problem.
View 4 Replies View RelatedI am running Slackware X68_64 and I just purchased a second monitor. I enable separate x screens with nvidia-settings and when I reboot I get a black screen and when I put my mouse over to the secondary monitor I get X for the mouse pointer. Than after a while it just blacks out.
View 11 Replies View RelatedI added the Nvidia Repo, installed the 260 driver, but I noticed the temp is like 83c. How can I change the fan settings to 60% like it is under windows? Opensuse 11.3 x64 KDE
View 1 Replies View RelatedI've a laptop with 2 external monitors connected to it.Using SaX2 I can't configure it in a way where it only uses the two external monitors and not the laptops own screen.With nvidia-settings I can configure it properly, as I am however unable to save it due to a missing xorg.conf file how am I supposed to save the this config so it isn't 'forgotten' between reboots?
View 2 Replies View RelatedI'm having the following problem with SUSE 11.3 and my Nvidia Geoforce 7300 GT. I have the driver installed but am unable to change the resolution in the Nvidia configuration X-Server. It seems it is limited to the following 640x480 and 320x200. fix this as it looks awful and I know that I should have greater resolutions.
Please find my xorg.conf listed below
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder97.nvidia.com) Fri Aug 27 20:55:22 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
[Code]...
After installing some (much needed) upgrades, I am stuck being unable to install nvidia-settings after screen-resolution-extra upgraded from .11 to .13. Nvidia-settings, supposedly, requires .11. I can, of course, downgrade to .11, but I do not know if this is recommended. Is there anyway to get nvidia-settings back without downgrading? What is a good course of action?
View 1 Replies View Relatedafter many a tear I just by sheer chance found out that, when logging in to my gnome-session (or any session really) from kdm I can do something that has eluded me for quite a while now: change screen-configuration between 1 screen and 2 screens as I please without having to log out, shutdown x, copy xorg.conf I need, restart x, log back in.
So question is: what could it possibly be, that makes GDM break a feature like this for the nvidia-settings dialog? Can anyone confirm this? *wants that error and shoot it in the face... er... code!* I still don't feel like reinstalling the whole thing, just to find out if this is due to this system being... well... OLD. Also call me a bit oldschool, but reinstalling is just lame.
*edit* me dumbass:
NVIDIA-Linux-x86-260.19.12.run
2.6.35-23-generic-pae
maverick
I have 2 monitors, a 22 inch samsung as my main and an acer as my alt. I am trying to get the samsung monitor to display, but is is disabled. So I enable it as a separate x display, then save, but when I restart x, the settings didn't save. I save the config under under /etc/X11/xorg.conf. What am I doing wrong?
View 4 Replies View RelatedI just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
View 7 Replies View RelatedI currently have a problem with my nvidia settings
I reinstalled 11.04 kubuntu recently and I no longer could use my second screen.
I looked into my nvidia settings and enabled my second screen (separate x screen).
However when I do so and press apply the second screen does nothing.
This is two desktop monitors and not a laptop and a monitor.
I finally got around to installing the Nvidia driver (gotten from Slackbuilds.org).
Overall, I'm pretty happy with it, but it wants to default to 1280x1024 resolution and we prefer 1024x768 on our old 17" CRT monitor.
No matter what I do, though, it starts up in 1280x1024. We start X from runlevel 3 and go into KDE 4.3.1.
It is not difficult to change to 1024x768 using the Nvidia configuration utility, but then the menu fonts are HUGE -- especially in Thunderbird and Firefox.
My xorg.conf is below.
xorg.conf:
Code:
I have triplebuffer set up in the xorg.conf, i am using the squeeze Nvidia drivers (the ancient one), installed debian way.
In nvidia-settings, i have enabled all the entries of sync to vblank, but after i log in, if i go a glxgears, i get 1000+fps, then i start nvidia-settings, the screen flickers when it starts for some reason, resolution is still at native (1366x768), after starting and quitting nvidia-settings, starting glxgears made it 60fps.
How to i make sure sync to vblank is forced? i prefer it this way.
I've always used Debian with a single monitor and no need of proprietary drivers, because I usually don't do graphics or multimedia. Now I'm asked to set-up a machine with 3 nvidia video cards (770) and 4 monitors and everything went south. I started with just 2 monitors connected to 2 different video cards, not wanting to push my luck.
I installed a fresh Jessie and followed the instruction to install the nvidia drivers and tools from the Wiki. Everything went smooth. After reboot I executed (as root) nvidia-settings and I configured the two monitors to be one to the right to the other, with BaseMosaic option (at this point just one monitor was active) I saved the configuration to /etc/X11/xorg.conf , I even executed nvidia-xconfig as suggested, I rebooted and nothing happened, only one monitor was working, while the other -- looking again in the nvidia settings -- was still disabled.
I then tried with xinerama option and things are even worse, since now both monitors are black. I can login in one textual shell, but then I don't know what to do, since in my 10+ years of linux ... I never had to mess with X server. Is there a way to at least recover a working X without reinstalling everything?
My screen displays everything in a very wide but also very short way. When i click on (X Server Display Configuration) NVIDIA X Server Settings
I get this:
Sometimes, running "nvidia-settings" will cause the whole desktop to freeze for about 5-10 seconds, spike the Xorg CPU usage up to 100%, until the settings appear where everything goes back to normal.
Running "nvidia-settings" from a terminal does not show any output and restarting X does not help. Any ideas how to figure out what is happening, any places to look for log files?
I am using an up-to-date openSUSE 11.3 (64-bit), KDE 4.5.2, an NVIDIA GeForce 9800GT and the proprietary NVIDIA driver 260.19.12, which I installed manually following the instructions from
SDB:NVIDIA the hard way - openSUSE
I have connected my computer to my LCD-TV (HDMI-cable) to enjoy my movies and such, on a big screen. I have nVidia GeForce 7050 so in nvidia-settings I've been using the TwinView configuration which allows me to see both the monitor and the TV.
There was a bit of trouble-shooting but it worked just fine until yesterday when I changed my monitor to a new one and on the way probably messed up in nvidia-settings. I thought it would be easy to fix it but the configuration (in nvidia-settings) is stuck on "separete x-screen" and doesn't allow any changes at all. When I hit the "Detect display" nothing happens although I have the TV connected!
Maybe my xorg.config could tell somebody what is wrong. I've been messing around with the file and made lots of changes acc to different advices but I really don't understand the options and settings so I'm afraid I'll soon do something inreperable.
[Code]...
I'm trying to set graphical settings like AA, AF and Vsync in Nvidia-settings however they don't stick, all I get is a error like this code...
and I have to manually reset them to desired values after every login. Is there a way to make them stick when logging in/out?
I have ubuntu 10.4 32 bit. I have 2x gtx 285's in sli that work perfectly fine in sli in windows (so its not a hardware not properly physically installed issue). But in ubuntu in the x server settings only one of the cards shows up. I was wondering if this is a 32 bit issue as in the past running 64 bit they have both shown up fine.
View 6 Replies View Related