Ubuntu :: Lucid-"Warning Symbol": "Package Information Is Outdated..."
Jun 6, 2010
I have been constantly getting the red "Warning Symbol" that tells me that my "Update information is outdated."Of course I luse Update Manager and "Sudo Apt-get update/upgrade" in Terminal, but this appears after a bit, everytime I reboot. Could this be related to the GetDeb archives being offline (If so, then someone needs to get this fixed; an offline repo is not worthy of a "DANGER WARNING ATTENTION" symbol!
View 5 Replies
ADVERTISEMENT
Sep 23, 2010
I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
View 7 Replies
View Related
Jan 26, 2011
Wondered if anyone had a fix for this bug? I have been successfully updating my PC daily, however every now and again i get the warning triangle in the top right hand corner stating Update manger even thought updated almost daily reports "The package information was updated 26 days ago".
I have been into synaptic manager and slected best server for my updates and then i go into update manager and update the system, however, it doesnt solve it.
View 5 Replies
View Related
Mar 25, 2011
I have a problem with updating files in the update manager. Each time i do an update a red exclamation mark shows up eith the following error message : The update information is outdated. This may be caused by network problems or by a repository that is no longer available. Please update manually by clicking on this icon ant then selecting "check for updates"and check if some of the listed repositories fail. I tried doing this manually but nothing happens. I get a message saying that my system is up to date, and just underneath that it says "the package information was last updated 17 days ago".
View 8 Replies
View Related
Aug 3, 2010
Ubuntu tried to update, but some problems occurred. The triangle with an exclamation point in it showed up and I rolled my mouse over it.This is what it says:
"The update information is outdated. This may be caused by network problems or by a repository that is no longer available. Please update manually by clicking on this icon and then selection 'Check for updates' and check if some of the listed repositories fail."
I did what it says and this came up:"The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct."
and in the white box below the message:"Failed to fetch url 404 Not Found
Some index files failed to download, they have been ignored, or old ones used instead."
View 9 Replies
View Related
May 1, 2010
I've noticed a couple of times having comments about mplayer being outdated or that it needs updated since I installed Lucid a couple days ago. Anybody else having this issue? Or having trouble with mplayer?
View 9 Replies
View Related
Oct 9, 2010
When i run $ sudo freshclam I get this message ClamAV update process started at Sat Oct 9 12:21:22 2010 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.96 Recommended version: 0.96.3 DON'T PANIC! Read http://www.clamav.net/support/faq main.cvd is up to date (version: 52, sigs: 704727, f-level: 44, builder: sven) daily.cvd is up to date (version: 12114, sigs: 138436, f-level: 53, builder: sven) bytecode.cvd is up to date (version: 80, sigs: 10, f-level: 53, builder: edwin) Since I am a beginner i don't know how to upgrade freshclam as $ sudo apt-get upgrade doesn't work. Guessing I may have to download the package and install manually just thought I'd ask before doing that.
View 4 Replies
View Related
Oct 9, 2010
I switched off all updates just because I want to let the system update when I tell her to. But this red triangle in my systray is annoying me terribly a coupe of days after an update which actully forces me to just update it! How can I get rid of the evil red triangle?
View 1 Replies
View Related
Sep 23, 2010
I am writing a sample nasm program via terminal.It's a basic one ,it only demonstrates the usage of the zero and sign flags and print relevant message to the output. Here are the code:
Code:
SECTION .data; data section
errMsg:db "Error !",10
errLen:equ $-errMsg
zeroMsg: db "Zero flag",10
zeroLen: equ $-zeroMsg
[Code]....
View 2 Replies
View Related
Nov 25, 2010
I am addressing the staff that maintains the clamav anti virus software release and distributes it via the fedora repositories: Would you update to the newest clamav version? This is what I get using the installed version:
[Code]...
View 5 Replies
View Related
Jun 7, 2011
Downloaded the stable kernel 2.6.36.4 from kernel.org/ (Current Kernel:2.6.18-92.el5) However i have extracted the source code .ran make mrproper copied the old configuration file and selected it by using make menuconfig .However after selecting it and clicking ok i m getting following error.
Code: .
config:656:warning: symbol value 'm' invalid for IP_DCCP_CCID3
.config:657:warning: symbol value 'm' invalid for IP_DCCP_TFRC_LIB
#config:1353:warning: symbol value 'm' invalid for FIXED_PHY
# configuration written to .config 'm' invalid for IWL4965
[code]....
View 9 Replies
View Related
May 3, 2010
Upgraded to Lucid and there is no volume control on the upper panel just to the left of the date calendar/time like there was on Karmic and earlier versions. Searched but can't find it. How can I put it back on the upper panel? It looked like a speaker with sound waves coming out of the speaker. I always used it on other versions before.
View 9 Replies
View Related
Sep 23, 2010
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
View 4 Replies
View Related
Jan 17, 2010
ive made a slight mistake on my Ubuntu 9.10 64bit. I was trying to get Voodoo Motion Tracking software to work, and it was having trouble locating some Qt Libs, so I decided it was a good idea to move its included libs into /user/lib32 directory. Voodoo now works, but Skype instead comes up with:
Code:
skype: symbol lookup error: /usr/lib32/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv Skype was installed using their own provided 64bit .deb - it was previously working fine.
View 2 Replies
View Related
Oct 21, 2010
The most recent update impacted my thunderbird-3.0. When launched I get these error messages
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: Symbol `SSL_ImplementedCiphers' has different size in shared object, consider re-linking
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: symbol lookup error: /usr/lib/libnssutil3.so.1d: undefined symbol: PL_ClearArenaPool
I can only assume the libnssutil3 library was upgraded and this broke the library call in the thunderbird-3.0.
View 3 Replies
View Related
Dec 6, 2010
I'm running Ubuntu 10.10 and was looking for software to mix mp3's. I want to try mixxx (found here) I installed the most recent package by using the ppa of the project (as described here) Install seems to be ok (no error messages)But when I try to run mixxx from the menu nothing happens. Nothing. Running it from the terminal with the command
Code:
mixxx
I get this error message:
Quote:
mixxx: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
View 2 Replies
View Related
Feb 28, 2011
Could not initialize the package information An unresolvable problem occurred while initializing the package information.Please report this bug against the 'update-manager' package and include the following error message:'E:Encountered a section with no Package: header, Eroblem with MergeList/var/lib/apt/lists/in. archive. ubuntu.com_ubuntu_dists_lucid-updates_universe_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
View 1 Replies
View Related
Mar 1, 2011
was trying to install cairo dock and I'm not sure what happened but when I attempted to open the update manager I got this message,"An unresolvable problem occurred while initializing the package information.Please report this bug against the 'update-manager' package and include the following error message:'E:Type 'wget' is not known on line 63 in source list /etc/apt/sources.list'"
View 4 Replies
View Related
May 10, 2011
I just installed Ubuntu 11.04 a couple days ago. I went to system settings, double clicked update manager, and this came up: could not initialize the package information an unresolvable problem ocurred while initializing the package information please report this bug against the 'update-manager' package and include the following error message: 'E:Type'-2011-05-10' is not known on line 1 in source list/etc/apt/sources.list.d/medibuntu.list'
What does this mean?
View 3 Replies
View Related
Dec 15, 2009
Apache doesn't start with libedit.so.0.0.34 ( from libedit0-3.0.snap20090923-4.1.x86_64 ).
Code:
[Tue Dec 15 16:20:51 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
PHP Warning: Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in Unknown on line 0
/usr/sbin/httpd2-prefork: symbol lookup error: /usr/lib64/libedit.so.0: undefined symbol: tgetent
Solution: I copied /usr/lib64/libedit.so.0.0.27 from a previous install and symlinked /usr/lib64/libedit.so.0 to it.
View 6 Replies
View Related
Sep 21, 2010
I performed a yum update and now my yum is not working and I am unable to start my apache processes (in a dmz configuration).This is the error I am getting from yum.
yum clean
Traceback (most recent call last):
File "/usr/bin/yum", line 4, in ?
import yum
[code]....
View 9 Replies
View Related
Feb 20, 2010
I readded all my sources and ppa's on the upgrade but now they are disabled? Also I have a malformed line..Why would they be disabled if I changed them all one by one through software sources?
Error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message: 'E:Malformed line 56 in source list /etc/apt/sources.list (dist parse), E:The list of sources could not be read.'
View 7 Replies
View Related
Jul 6, 2010
I just installed Ubuntu 10.04 and everything was working fine until I tried to update. Now I can't get any packages, update, or even get into a package manager. All of these give me the same error. 'E:Malformed line 48 in source list /etc/apt/sources.list (dist parse), E:The list of sources could not be read.' I looked into what this was and found the source list but have no clue what to change.code...
View 3 Replies
View Related
Jul 8, 2010
new to ubuntu and somethings up with my update manager. theres an alert icon in the right hand corner and its bugging me.. it has the the following error message: Could not initialize the package information. An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message: 'E:Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-lucid.list, E:The list of sources could not be read.' Also, its not letting me add/remove software through the command line nor software center. ANY IDEAS, SMART PEOPLE???
View 3 Replies
View Related
Sep 15, 2010
Package Installer and Package Manager keep returning failed and hit but zero byte messages.. This has been going on since yesterday, and I've tried it on 3 seperate internet connections.. I really don't want to go back to Windows 7, but at this rate
View 1 Replies
View Related
Dec 1, 2010
I reformatted my computer last night and put Ubuntu 10.04 on my Dell Inspiron B130 laptop. I made and used the Ubuntu 10.04 live cd last night. Install was uneventful. Now I can't use update manager. I get this error:
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:
'E:Read error - read (5: Input/output error), E:The package lists or status file could not be parsed or opened.'
View 3 Replies
View Related
Feb 24, 2011
I switched to ubuntu around two months ago, and I'm loving it, everything I could need and more in an OS. I've just recently stumbled upon a problem; I tried to add Playdeb.Net's source URL and this came up on my Update Manager window; "Could not initialize the package information. An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message: 'E:Malformed line 62 in source list /etc/apt/sources.list (dist parse)'" package and include the following error message:
View 8 Replies
View Related
May 9, 2011
Today, on Ubuntu 11.04, when attempting to update, this error message appeared in update-manager:
Code:
An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_natty_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.[code]...........
View 7 Replies
View Related
Apr 5, 2011
I cannot update package information in Synaptic Package Manager. In terminal window it shows inability to connect to 10.3.2.1:8080 (http://archive.ubuntu.com/ubuntu/dists/lucid etc). If I point to this url in my browser I can access the files.
View 8 Replies
View Related
Nov 19, 2010
i am unable to open update manager when i open it , it gives back a msg stating that cannot initialize the package information. and here is the error msg.
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_maverick-security_restricted_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
And when i tried with #sudo apt-get update
Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_maverick-security_restricted_binary-i386_Packages E: The package lists or status file could not be parsed or opened.
and even i tried with deleting that file(security.ubuntu.com_ubuntu_dists_maverick-security_restricted_binary-i386_Packages) but was unsuccessful.
View 9 Replies
View Related
