I am trying to setup the wlan access for my Fedora 9 system. I installed ndiswrapper. But when I run
Code:
ndiswrapper -l
i am getting the error
Code:
/usr/bin/perl: symbol lookup error: /usr/bin/perl: undefined symbol: PL_use_safe_putenv
Apache doesn't start with libedit.so.0.0.34 ( from libedit0-3.0.snap20090923-4.1.x86_64 ).
Code:
[Tue Dec 15 16:20:51 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
PHP Warning: Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in Unknown on line 0
/usr/sbin/httpd2-prefork: symbol lookup error: /usr/lib64/libedit.so.0: undefined symbol: tgetent
Solution: I copied /usr/lib64/libedit.so.0.0.27 from a previous install and symlinked /usr/lib64/libedit.so.0 to it.
ive made a slight mistake on my Ubuntu 9.10 64bit. I was trying to get Voodoo Motion Tracking software to work, and it was having trouble locating some Qt Libs, so I decided it was a good idea to move its included libs into /user/lib32 directory. Voodoo now works, but Skype instead comes up with:
Code:
skype: symbol lookup error: /usr/lib32/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv Skype was installed using their own provided 64bit .deb - it was previously working fine.
The most recent update impacted my thunderbird-3.0. When launched I get these error messages
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: Symbol `SSL_ImplementedCiphers' has different size in shared object, consider re-linking
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: symbol lookup error: /usr/lib/libnssutil3.so.1d: undefined symbol: PL_ClearArenaPool
I can only assume the libnssutil3 library was upgraded and this broke the library call in the thunderbird-3.0.
I performed a yum update and now my yum is not working and I am unable to start my apache processes (in a dmz configuration).This is the error I am getting from yum.
yum clean
Traceback (most recent call last):
File "/usr/bin/yum", line 4, in ?
import yum
[code]....
I'm running Ubuntu 10.10 and was looking for software to mix mp3's. I want to try mixxx (found here) I installed the most recent package by using the ppa of the project (as described here) Install seems to be ok (no error messages)But when I try to run mixxx from the menu nothing happens. Nothing. Running it from the terminal with the command
Code:
mixxx
I get this error message:
Quote:
mixxx: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
Previously after doing aptitude upgrade, my pidgin seems broken with no gui shown. So I decided to download the latest source from pidgin website and build it from source, but I think I made situation worse because it then complained that ssl lib was needed. Then I removed the libpurple (e.g. aptitude purge libpurple0 libpurple-bin libpurple-dev) and reinstalled pidgin (aptitude install pidgin). Now it shows the error
pidgin: symbol lookup error: pidgin: undefined symbol: purple_media_element_info_get_type
I searched on the internet and can not find a solution. The clues on the internet says that's because the piding I use is the older version of libpurple. But I think I've removed all with purge and reinstalled it. Maybe some legacy binary is referenced. What or where it might be? Or where there may contain related information.
I have been trying to install lmms on my Slackware 12.1 system.I have installed QT, cmake in order to compile the source.
It seemed to install correctly (after a bit of reading about how cmake works....) but gives me this on run:
Quote:
bash-3.1$ lmms
Notice: could not set realtime priority.lmms: symbol lookup error: lmms: undefined symbol: _ZN8QPainter10drawPixmapERK7QPointFRK7QPixmap
bash-3.1$
So my understanding is that it is missing a file or command associated with the program, through it not being linked or not existing. Is there any way I can find out where it thinks this file/data should be, so as to ascertain what libs/packages have it? As far as I can tell, I have all dependencies satisfied.....
Pidgin won't start for me any more. Upon execution from the command line, this is the output:
pidgin: symbol lookup error: /usr/lib/python2.6/site-packages/gst-0.10/gst/interfaces.so: undefined symbol: gst_stream_volume_format_get_type
I've run sudo /sbin/ldconfig, but it didn't help. I've also reinstalled pidgin and libpurple.
I get the following error message starting k3b:
frank@linux-avnb:~> k3b
k3b: symbol lookup error: /usr/lib/libkcddb.so.4: undefined symbol: _ZN9QListData11detach_growEPii
<unknown program name>(26884)/: Communication problem with "k3b" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" :
" "Message did not receive a reply (timeout by message bus)" "
frank@linux-avnb:~>
Linux Mint Debian Edition x64 is installed and running quite nicely. But as most 64bit users know, you have to take care of the 32bit libraries in order to run alot of software....well, only if you need to run 32bit software.
So, in practice, the first steps are to install ia32-libs and ia32-libs-gtk. That's the foundation. But sometimes that isn't enough....so, depending on your application, you have to discover it's dependencies....via 'ldd'.
For whichever libraries are required, I head over to the Debian 'testing' respository (which LMDE is based off) and search. So after satisfying the dependencies it should be good....take the following as example:
Code:
xxx@xxx ~/Floola $ ldd Floola
linux-gate.so.1 => (0xf772b000)
libgtk-x11-2.0.so.0 => /usr/lib32/libgtk-x11-2.0.so.0 (0xf732e000)
libgdk-x11-2.0.so.0 => /usr/lib32/libgdk-x11-2.0.so.0 (0xf7293000)
code....
However, when trying to run the program the following error occurs:
Code:
xxx@xxx ~/Floola $ ./Floola
./Floola: symbol lookup error: /usr/lib32/libgobject-2.0.so.0: undefined symbol: g_date_time_unref
So from some research, this indicates an issue with a date stamp/version conflict...if this is incorrect, ...this is part of the learning process.
Anyway, this error occurs with other 32bit software i'm trying to run.
The strange thing, though, is that i've done a fresh install of LMDE and ran the same process of setting up the 32bit libs as I did before....but this time I get this error.
I noticed that a lot of software updates were ready today so I installed all of them without thinking to make a note of what they were, so I don't know if ffmpeg or one of its dependencies was amongst them. The very next time I ran ffmpeg, it gave me an error I haven't seen before. After downloading a file from BBC's iPlayer site using get-iplayer, I ran a script to convert it to a format suitable for my Samsung YP-Q2 personal media player. I copied the command out of that script and pasted it onto the command line so that I could capture the console output of that encoding session, shown below:
Code:
[garry tv]$ ffmpeg -i inputfile.mp4 -acodec libmp3lame -ar 44100 -ab 128k -ac 2 -vcodec mpeg4 -b 1024k -r 15 -s qvga outputfile.avi
FFmpeg version git-bcf9828, Copyright (c) 2000-2009 Fabrice Bellard, et al.
built on Oct 25 2009 11:48:38 with gcc 4.4.1
Configuration: --enable-gpl --enable-nonfree --enable-shared --enable-pthreads --enable-libx264 --enable-libfaac --enable-libtheora
libavutil 50. 3. 0 / 50. 3. 0
libavcodec 52.37. 1 / 52.20. 0
libavformat 52.39. 2 / 52.31. 0
libavdevice 52. 2. 0 / 52. 1. 0
libswscale 0. 7. 1 / 0. 7. 1
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x9d27700]ISO: File Type Major Brand: isom
st:1 removing common factor 48 from timebase
Seems stream 0 codec frame rate differs from container frame rate: 100.00 (100/1) -> 25.00 (25/1)
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'inputfile.mp4':
Duration: 00:58:39.02, start: 0.000000, bitrate: 831 kb/s
Stream #0.0(und), 1/50: Video: h264, yuv420p, 640x360, 1/100, 25 tbr, 50 tbn, 100 tbc
Stream #0.1(und), 1/1000: Audio: aac, 48000 Hz, stereo, s16
ffmpeg: symbol lookup error: ffmpeg: undefined symbol: avcodec_channel_layout_num_channels
[garry tv]$
This error, "undefined symbol" is what makes me think that either ffmpeg or one of its dependencies has been updated or the error would have occurred before now. I've been using the script with the command in the above form for some weeks now with no problems, almost always converting an MP4 (but sometimes a .mov) into an AVI. Thinking that it might be the version of ffmpeg in the standard repos, I followed the advice of this thread and removed the standard ffmpeg and installed the one from Medibuntu. (Removing the standard one took WinFF and DVDRip with it, but I reinstalled those afterwards, and I'm sure they don't come into the equation otherwise.) I re-ran the command and the error was exactly as before. Is ffmpeg recently borked or am I missing something obvious? Or something obscure, for that matter?
After I upgraded 11.04 on my netbook (Latitude 2110), I get a symbol lookup error when trying to run Spotify (Native Linux Client) and other QT based applications:
spotify: symbol lookup error: /usr/lib/libQtDBus.so.4: undefined symbol:_ZN14QObjectPrivate15checkWindowRoleEv
I found the following thread on the Spotify support website, with the exact same error. I cannot quite understand how to diagnose and fix the problem from the information provided. Anyone got a good tips or hint?
Anyone else having problems installing Skype beta (direct from Skype) on 11.3 x86_64? Error is:
Code:
skype: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv
I've been through the forums and Google and made sure I have all the 32-bit libs required by skype. For example:
Code:
6930p:~ # rpm -qa | grep -i libqt4
[Code]...
I am using Ubuntu 10.10 I get the following massage. Admin@Ubuntu21:~$ skype: symbol lookup error: /usr/lib/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv I have tried reinstalling it but still the same problem.
View 1 Replies View RelatedWhile compiling one of my programs I am getting this error: Undefined symbol:_gfortran_internal_malloc64My program actually gets completely compiles and linked and this error is shown in run time.Does anybody have any experience about getting around this ? May be using some different version of GFortran ?I am using Centos 5.4 64 bit and GFortran 4.4
View 1 Replies View RelatedIf i start shotwell i get this message.shotwell: symbol lookup error: /usr/lib64/libgee.so.2: undefined symbol: g_malloc0_n
Not sure if i killed something, but would like to get it going again.Can not really figure it out, but i reinstalled shotwell. Did not solve the problem.
Yesterday my gnome gui locked up during startup. there is a problem with the "gnome power manager" package.
I get a pop-up saying "The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
Tried:
When trying to reinstall the gnome-power-manager package, I get the following error: gconftool-2 symbol lookup error: gconftool-2 undefined symbol gconf_schema_set_gettext_domain
Only the terminal works>
This is the error I receive when I try to install a library. I really do not know If I could do something to skip this error message.As you might see below. I receive the following error message Error in dyn.load(file, DLLpath = DLLpath, ...):unable to load shared library '/home/apa/R/x86_64-unknown-linux-gnu-library2.11/RandomFields/libs/RandomFields.so': /usr/lib64/R/lib/libRlapack.so: undefined symbol: _gfortran_concat_string
This is the full error log
Bash | [CODE]* installing *source* - Anonymous - d4DH09Wx - Pastebin.com
When I tried to boot up this morning I receive the following errors: init: plymouth main process (302) terminated with status 127.mountall: symbol lookup error: /lib/libm.so.6 undefined symbol: , version GLIBC_2.0
init: mountall main process (323) terminated with status 127 I am using Ubuntu 10.10 and things have been fine until now. Can someone explain the errors and suggest how I can fix them. Right now I am using the trial version on the install cd to get up. I do have access to my main hard drive so I can make corrections.
I just installed the latest updates from Slackware-Current, The update went fine, did a reboot, installed the nvidia driver (NVIDIA-Linux-x86_64-195.36.08-pkg2), started X successfully. Now, whenever i open an X dependent application it gives me the following error:
Quote:
symbol lookup error: /usr/lib64/libXi.so.6: undefined symbol: XESetWireToEventCookie
I am running a Multilib setup, i have the latest toolchains from AlienBob installed. the ldd output goes like this:
Code:
linux-vdso.so.1 => (0x00007fff9ebd2000)
libXext.so.6 => /usr/lib64/libXext.so.6 (0x00007f8daef94000)
libX11.so.6 => /usr/lib64/libX11.so.6 (0x00007f8daec5b000)
libxcb.so.1 => /usr/lib64/libxcb.so.1 (0x00007f8daea3f000)
[code]....
Having installed samba4 and smbfs I am trying to share my documents directory into my home network. But when try to do this I get the following error -
Samba's testparm returned error 1: Traceback (most recent call last):
File "/usr/bin/testparm", line 43, in <module>
import samba
[code]....
I am using 10.10. I want to use ubuntu machine as my backup.
I upgraded f13 to f14 and X fails to start. I compared the newest Xorg.*.log with what I get booting from the live CD (successfully) and the problem seems to be here:
Code:
[ 62.408] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 62.408] dlopen: /usr/lib64/xorg/modules/drivers/nouveau_drv.so: undefined symbol: miEmptyData
[ 62.408] (EE) Failed to load /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[code]....
In the meantime I will try and force an upgrade to fc14 packages. I really have to get this working before using the target machine at work tomorrow!
I'm trying to use mencoder and get these errors:
Code:
/>mencoder
mencoder: /usr/local/lib/libavformat.so.52: no version information available (required by mencoder)
mencoder: /usr/local/lib/libavutil.so.49: no version information available (required by mencoder)
[code]....
I've compiled a program on ubuntu with python(make python) but the problem comes when I try to use it and exactly after the command line "from libpy import *", the message that appears is such
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "libpy/knit.py", line 28, in <module>
import _knit
ImportError: libpy/_knit.so: undefined symbol: _ZTVN10__cxxabiv120__si_class_type_infoE
undefined symbol: _gfortran_internal_malloc64?
View 2 Replies View RelatedI cannot seem to get VMWARE workstation to run on SUSE 11.3. I am getting the following error message: /usr/lib/vmware/bin/vmware-modconfig: symbol lookup error: /usr/lib/gio/modules/libdconfsettings.so: undefined symbol: g_settings_backend_get_type
This is happening with version 6.5 as well as 7.1
I am using Suse 11.3 and Adobe Reader9, all updates are installed. However, trying to print an pdf results in:
/usr/bin/acroread: symbol lookup error: /usr/lib/libssl.so.0.9.8: undefined symbol: EVP_camellia_128_cbc
I recently wanned to use my vmplayer installation and I got the following error : /usr/lib/vmware/bin/vmplayer: symbol lookup error: /usr/lib/vmware/lib/libvmwareui.so.0/libvmwareui.so.0: undefined symbol: vmodl_vmomi_key_any_value_get_type
I try to reinstall vmplayer. It didn't help.
Slightly odd one.On a clients server yum seems to be completely broken, i.e :-
------------------------------------------------------------------------------
[root@tvsmedia noarch]# yum
There was a problem importing one of the Python modules
[code]....