Programming :: Catch Some Outputs In Two Different Log Files In Bash?
Jan 26, 2009
I want to catch some outputs in two different log files in bash, file simple.log and all.log So far, the script is started like this:
Code:
xterm -e "(./myscript.sh | tee -a simple.log) >& all.log"
What I want is:
- In simple.log, I want all the stdout but WITHOUT errors.
- In all.log I want BOTH stdout and stderr.
So all is ok, and the output becomes:
all.log
Code:
starting copying files
mv: cannot move ... : permission denied
copying completed
simple log
Code:
starting copying files
copying completed
But, in the new xterm, I'm loosing stdout. There is no output.How can I have the files logged as they are but also have the stdout in the xterm.
View 6 Replies
ADVERTISEMENT
Oct 30, 2010
How do you catch user input while the script is running? Or, how would you make two scripts run at the same time, but use input from one script to the other? The program I'm trying to make, echos text on the screen continuously, but while thats happening, I want the user to be able to input something, so the program can detect the input and display something else. So I thought maybe I could make two scripts run to do each task.
View 5 Replies
View Related
Apr 21, 2010
I have the following working script. It checks the directory for txt files, if files are there, it copies to another directory or gives error. I would like to exclude "file not found" errors and send them to /dev/null. All other errors should go to the email address as usual.
Code:
#!/bin/bash
function err
{
if [[ $? -ne 0 ]]
[Code]....
View 7 Replies
View Related
Nov 5, 2010
I would like to compare two md5sum outputs to see if the files match. in my script I have
Code:
ORG_FILE="/path/to/org/file.zip"
NEW_FILE="path/to/new/file.zip"
MD5_ORIG=$(md5sum -b "$ORG_FILE")
[code]....
How do I get just the MD5 hash and not the */.... stuff so I can compare them. i tried Code: JUST_HASH=${$MD5_ORIG:0:32} but All I get is
dir_mon_notify.sh: line 79: ${$MD5_ORIG:0:32}: bad substitution
View 1 Replies
View Related
Sep 12, 2011
Is there a way to catch or stop a Linux shut down after a reboot, halt or shutdown command has been entered?sudo shutdown -r +10 I should now have 10 minutes before the computer shuts down. If I change my mind and decide that I still want to continue running, how could I stop the shut down?
View 1 Replies
View Related
Mar 27, 2011
I have a Socket library, written in C++, in which the method used to send data never has the opportunity to handle an errno of SIGPIPE. Thus I thought perhaps I should setup a signal handler to receive the signal, but this too is not being called.Is there something that I am missing or doing that is completely wrong? Below is the relevant code. Note that a SIGPIPE signal is generated when the Server is unable to send data to the Client (e.g. the client has terminated).Server code:
Code:
#include <TCPServerSocket.hpp>
#include <string>
[code]...
View 1 Replies
View Related
Feb 2, 2011
right now i am writing bash script for simple everyday todo tasks.script consisit of two files, fisrt is just script (which can delete/append /clear) and second one is todolist.txt which stores my notes.I am litlebit confused about sed!!for example, If my todolist.txt have these lines:
- Writing my Homework
- take my girlfriend to launch
- Take a break
How can sed take my input $@ and delete all line with name "Homework"..i trayed with many sed combination like:
Code:
sed s/$@//g
sed 'd/$@/'
and many more combination with ""/'' or bracket but nothing helped
View 5 Replies
View Related
Jan 24, 2011
The following C++ program doesn't catch the exception:
Code:
#include <iostream>
using namespace std;
[code]...
View 2 Replies
View Related
Apr 25, 2011
But unable to catch the SIGTERM signal if I do shutdown, as man pages says shutdown genrates the SIGTERM and SIGKILL signals, but we cant handle the SIGKILL signal. My code is working fine if I genrate the SIGTERM signal by Kill command, and also for SIGINT signgal genrated from the CTRL+c key.
Here is my code:
/* Example of using sigaction() to setup a signal handler with 3 arguments
* including siginfo_t.
*/
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <string.h>
[Code]...
View 5 Replies
View Related
Mar 31, 2011
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
View 10 Replies
View Related
Aug 2, 2010
I've been able to get the right output that I need from sed, but how can I execute the string that sed actually outputs?
View 3 Replies
View Related
Feb 16, 2010
I would like to make a one-liner, which diff's "ps aux" output before and after killing a process. So basically it should be a combination of fallowing commands:
1) diff -u
2) ps aux | awk '{print $2}'
3) kill `ps aux | grep [c]ron | awk '{print $2}'`
4) ps aux | awk '{print $2}'
How to achieve this? Something like this:
Code:
diff $( kill `ps aux | grep [c]ron | awk '{print $2}'` && ps aux | awk '{print $2}' ) $( ps aux | awk '{print $2}' )
I don't have pgrep or pkill available.
View 3 Replies
View Related
Sep 10, 2010
Consider this PHP Script or just skip to the Output:
Code
Code:
-bash-2.05b# cat myDate.php
#!/usr/bin/php -q
<?php
[code]....
View 10 Replies
View Related
Dec 8, 2010
I am an uploader to a various hosts, so this tiny script me a lot. I make a rar archive and split files with 100mb. I could get 3-4 or even 76 parts of rar files and it would take me some time to paste all these urls to remote upload function of filehosting sites. For example:
Code:
server:/home/cober/downloads/teevee# ls -al
total 358784
drwxrwxrwx 2 root root 4096 Dec 8 19:38 .
[code]....
View 1 Replies
View Related
Sep 4, 2010
I have a requirement like this:Cut the characters from each line of a file with following positions: 21-24, 25-34 ,111-120.Thse fields now need to be placed in a tab delimited output file.Currently this is how I am achieving it:
#!/bin/sh
cat newsmaple.txt | cut -c 21-24 > out1.txt
cat newsmaple.txt | cut -c 25-34 >out2.txt
[code]....
View 1 Replies
View Related
Jan 7, 2010
I have a directory that has about 5,000+ folders in it and I'd like to run a script that outputs any directory that contains a subdirectory.
View 4 Replies
View Related
Jul 13, 2011
I have a lot of filenames (strings) following the same convention
m02_+1+7_London_0000$01.cfg
m02_+1+8_London_0000$01.cfg
m02_+1+8_London_0000$01.cfg
[code].....
What I want to do is to create a script that will interpret the following string and save into variables part of its name
m02_+1+7_London_0000$01.cfg as
------X-Y--City---------
X=1
Y=7
City=London
[code]....
then I want to copy the files that go all the files with the same City and X and Y to the same subfolder City/MX.Y I will need some help start doing that. And I think the first would be to get part of the filenames strings into variables.
View 3 Replies
View Related
Mar 11, 2011
I am trying to find a nightly backup if it was successfully copied over, rename it and curl, but it's always passing the check even if the file is older than specified. From the command line it does as it should. Example is here;
Code:
find /backup -type f -mmin +4440 -exec echo "found" {} ;
- nothing returned (good). Then I change the time
[code].....
View 4 Replies
View Related
Jun 15, 2011
I'm making a small script for searching and doing some operations with photos, but I'm kinda stuck on this little function:
Code:
function findallformat {
prefix=""
if [ $1 = -pre ] then
[code]....
That function should find for every file with a certain type; and you can specify a prefix using a "-pre" followed by the prefix that you want to search. The format should be "stackable", so you can use as many types that you want, without repeating the same function on the code.
Example: findallformat -pre IMG_ .JPG .CR2 #That should search files that start with "IMG_" and finishes with .JPG and .CR2. My problem it's that, when I try to use it on the script, it says "bash: syntax error near `token' unexpected `}'"
View 4 Replies
View Related
Apr 1, 2010
I'm trying to rename a lot of files getting rid of the space on the names. For that purpose I wrote this very simple bash script, but for some reason is not working.
Code:
for i in "$(ls)"
do
j=$(echo "$i" | sed 's/ /_/g')
mv "$i" "$j"
done But what I get in return for each line is just one long file name with all the file names concatenated. I've tried with echo -e "$i" as well with no results. This has to be something really simple that I'm missing but I just can't see it.
View 11 Replies
View Related
Nov 6, 2010
I am trying to write a simple script to list all the files in a directory. The script I wrote was as below where the pdb_files is a directory and all the files which I want to list are in that folder.
Code:
files=`ls -F pdb_files/*THERMO*`
for inFiles in $files
do
echo $inFiles
[Code]....
View 5 Replies
View Related
Mar 21, 2010
I have around 600 empty text files that I need to add the name of this file as part of the data, I meanfiles from "file1.txt to "file599.txt, all of them empty, and I need to get the name inside the file, so, when I open the file show the name as part the data "file1".these files were created on my web site, I am thinking in a small script in bash
View 5 Replies
View Related
Jan 14, 2011
How can I iterate over all the files in the current directory to check for certain permissions? This is what I have:
Code: #!/bin/bash
for file in *.tar.gz
do if [ -r "$file" ]
then echo "$file is readable"
else echo "$file is NOT readable"
fi done
But this only checks that the current user has read permissions for each file. I want to check that the group "others" has read permissions for each file. How can I do this? Is there a built in function to check if a file has read permissions for the "others" group? Otherwise, I thought I might be able to use this:
Code: $ stat --format=%a file
744 And parse the output "744" and make sure the 3rd number is between 4 and 7 (since the octals 4-7 have read permissions for others).
View 2 Replies
View Related
Feb 10, 2010
I'm building my first BASH programs and I have a hard time. I can't do a search in a folder and filter only script files without extension, the problem is to differentiate the script files from the others. I tried with ls I tried with find and i don't find a way to make it work.
View 8 Replies
View Related
Feb 2, 2010
Never mind, I figured it out myself. Firstly, the old version of BASH I'm using doesn't support
Code:
for i in {1..27}
So I had to use
Code:
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Secondly, it was simply
Code:
#!/bin/bash
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
do
[code]....
View 2 Replies
View Related
Jul 22, 2011
I have about 50 files that the script will operate on, they are all located in the same directory.I need a bash script that will operate on all files in a directory. The script needs to add two lines to the beginning of each file based on the file name, and one line to the end of the file.A file named myfile.h should add these two lines to beginning of the file:
Code:
#ifndef MYFILE_H
#define MYFILE_H
[code]....
View 5 Replies
View Related
Jan 31, 2009
i was wondering if there's a bash script to check the amount of files in a directory with an IF statement..
View 8 Replies
View Related
Jan 26, 2011
I have wrote a 1 line command that parses a file, locates the IP Address in the file and then trims the output the way I want it, and then sorts numerically and by uniqueness and then >> appends to output.txt
I can get all the IP's into 1 file "output.txt", but what I am really looking for is some type of way to create a text file, for each IP it finds labeled xxx.xxx.xxx.xxx.txt and also put that ip address into that file..
xxx.xxx.xxx.xxx = the ip address it finds
View 14 Replies
View Related
Nov 9, 2010
However, the ffmpeg command generates a temporary file blahblah.mpg.tmp of about 1GB per hour of transcoded video.My issue is that I can't seem to delete these files automatically from any bash script.Now from the command line, I can cd to the directory and just rm -f *.tmp and they get deleted. However, from my script, that same command doesn't remove those files. I thought maybe the file was in use, so I put a sleep command in for like an hour before the delete happens, but it still fails. I also put rm -f /mnt/mythtv/*.tmp in a root cronjob and it still doesn't delete the files.
If I just rm *.tmp I do get a prompt about "Are you sure you want to delete this write protected file?". But the -f switch seems to work fine as a normal user from the command line and just delete them.Does anyone have an idea how to troubleshoot this problem? The particular filesystem that the tmp files get generated on is on it's own xfs partition mounted as /mnt/mythtv.
View 8 Replies
View Related
Mar 29, 2010
I have to copy some log files with a cron job; I'd like to copy only the newer files added because I run the script with a weekly cron. all the log files are named like "10-03-29.CVS" and reside in a dir. When I copy I'd like to copy only the files not already copied with the last cron job.
View 8 Replies
View Related
