I am trying to write a simple script to list all the files in a directory. The script I wrote was as below where the pdb_files is a directory and all the files which I want to list are in that folder.
Code:
files=`ls -F pdb_files/*THERMO*`
for inFiles in $files
do
echo $inFiles
[Code]....
I have a set of files containing data that I need to re-arrange into one single property list.
The files that I have look like this:
Code:
# cat uk
<string>10</string>
<string>11</string>
...
<string>29</string>
[Code]....
So the lines in the files match up but I haven't found a way of reading several files line by line.
I have a config file that contains:
my.config:
Code:
Now in my bash script, I want to get the output /home/user instead of $HOME once read. So far, I have managed to get the $HOME variable but I can't get it to echo the variable. All I get is the output $HOME.
Here is my parse_cmd script:
Code:
I have about 50 files that the script will operate on, they are all located in the same directory.I need a bash script that will operate on all files in a directory. The script needs to add two lines to the beginning of each file based on the file name, and one line to the end of the file.A file named myfile.h should add these two lines to beginning of the file:
Code:
#ifndef MYFILE_H
#define MYFILE_H
[code]....
i was wondering if there's a bash script to check the amount of files in a directory with an IF statement..
View 8 Replies View RelatedI have very little linux experience. And need some help with a bash script. I need to a script I can set cron to run to sort files out of a holding folder into final folders. It doesn't necessarily have to be bash, but I think it would be sufficient for this. File names are formatted as such when created: Dest-Date-Time-CID-Destination# I want the files to be moved from a all in one holding folder to a folder structure like this.
.../storage/year/month/day/Destination#/VarX(type)/hour/CID/'File'
I would need an if/else if/else statement to say if Dest = A set VarX = B If for example the file name was
infinity-20100927-17:00-1112223333-4445556666.wav
I would like the above file to end up moved from
.../holding
to
.../storage/2010/09/27/4445556666/Inbound/17/1112223333/infinity-20100927-17:00-1112223333-4445556666.wav
So the script will need to make directories based on information in the file name which is delimited by single dashes. Then move files from the holding folder to the newly created "sorted" folders.
I've been reading about getopt and getopts but it doesn't seem like it's possible to parse arguments like --foo or even -foo. I've started my own script trying to achieve this, but I'm still wondering if I'm losing performance and if there is a better way to do this task.
Also I'm using the [[ =~ ]] regex syntax which seems to be available only in newer bash versions, should it be a big issue? My bash version: GNU bash, version 4.1.7(2)-release (x86_64-unknown-linux-gnu)
[Code]...
I need to Read a path of a file witch is written in Text file i used this
Code:
FILENAME=$1
while read line
do
echo $line
done < $FILENAME
it worked and showed me the Line witch was written in my file but now my problem is how am gonna use that line as a path i mean for example if am gonna execute a linux command on that file like dpkg -i /path/to/the/file how am gonna export it from The $Line variable and use it after the command.
how to program in bash, an i have a problem, i am trying compare values in between 2 values (from another file), so far my solution is to make a nested for loop, but that causes it to compare every value. Here is a visulization of what i want
file.a 2,3,4,5
file.b
3 5
[code]...
i want the values 2, 3, 4, 5 from file.a to be compared inbetween values 3 5, 6 9,1 2, 4 7 from file.b (var1 is the value im comparing, var2 is the less value, var 3 is the greater value)
for i in $var1
do
for k in $var2
do
[code]....
my problem with the above code is it compares EVERYINNG, not the values inbetween what i want (which is 3 5, 6 9 etc).
Here the description of the issue I am having.I am writing a bash test script which reads lines from a file, builds ISO messages, sends them to a server, reads the response with response code and reports the result of the test to a file or on the screen.The message that I need to send is 94 characters long.Here's the portion of a code that I initially wrote:
~ Open socket.
exec 3<>/dev/tcp/172.26.0.25/9991
#~ Send msg.
[code]...
I am trying to do this:
1. Read csv delimited file line1 and store all values in array
2. Use the values stored in the array and replace values in other text file with them
3. read line2 in the cvs file and repeat the process
4. Do above for all lines in the cvs file
for example:
file1.cvs content:
text1,text2,text3,"text 4"
a1,a2,3,"a 4"
file.txt content:
some text $array1$ some text
some text $array2$ some text
1. read line 1 - text1,text2,text3,"text 4" put each value in array X[] lines that contain spaces in cvs will have double quotes
2. read x[1] and replace value $array1$ (in file.txt) with x[1]read x[2] and replace value $array2$ (in file.txt) with x[2] and so on
Can above be accomplished in BASH and how?
I would like to read unix file permissions into a bash array for processing but tbh I have no idea how to do this. Then I will check for each individual access right l, d, x etc.
View 11 Replies View RelatedWith F11 installed Apache is having permissions issues reading files out of the html directory. Only wants to work with permissions set to read for other. [Thu Jun 11 23:25:28 2009] [error] [client 127.0.0.1] (13)Permission denied: file permissions deny server access: /var/www/html/index.html Tracked down the permissions issue. Is there a good reason not to change the group to apache and remove world read?
View 1 Replies View RelatedIf we have a .so library elf in linux, will it be possible to find out the APIs supported by it. Or in other words, the functions that can be used along with the argument types and return type.? Note that we dont have any other header files or documentations related to the library.
View 5 Replies View RelatedI am currently writing an engine using SDL and openGL, and while I've gotten it mostly done, I've never really learned how to read configuration files. The configuration files that I'm hoping on using will be a straight forward syntax using "#" for comments and variables will be declared using "foo=hello". I don't need a lot of items in the configuration files, but enough to change needed settings. I'm not wanting to use external libraries (how are you going to learn if you can't do it yourself? :P) and I'm hoping to write it from scratch. If someone could please point me to a tutorial on how to do this or even some working code I may be able to figure it out. I am using the C programming language also(as I like it more than C++, sorry).
View 5 Replies View RelatedI have a folder which includes bunch of folders each having data files in them. [ Folder A has F1, F2 F3 ..... F1000 folders in it, and F1, F2, F3 ... each has about 10 different files named FILE 1, FILE2, FILE3 .... in them.
I am interested in File 1 of each Folder, because that contains the data I need in it. More specifically, that File1 s have a line "ANSWER=..." in them, and i need to get that value of the ANSWER from each file. So doing it by hand is so hard, so I need to write a script that will scan all folders and give me a list of values of eache ANSWERs.
Reading and writing text files in C?
View 9 Replies View RelatedThere are millions of files in many directories. Wherenver i try rm * or find or use xargs, they say 'argument list too long' and exit. How can i deleted files in a directory with so many files without deleting the directory itself.
View 3 Replies View RelatedI have a text file (myfile.txt) with columns a,b,c.
123 2 23
124 2 24
125 2 22
[code]...
After i try to find logfiles follow date/month/year. i want copy this files to another directory with name's directory is time you find(date/month/year).
View 4 Replies View RelatedI have a (rather large) database of mp3 track information. I also have several directories of the actual mp3s. I'm trying to write a simple bash script that will check the contents of the directories against what's in the database, and upon finding a file that isn't in the database, do something.
Here's what I have so far:
Code:
The trouble I'm having (in the sample directory of "/mnt/music/B/Beatles, The/" the file "Beatles, The - Taxman.mp3" isn't in the database.) is getting it to actually trigger an error when an entry isn't in the database.
Once triggering on a non-entered file is working, any way to get it to traverse the entire /mnt/music hierarchy?
I've got the following code and kludge. It's working okay except that there's a directory called "Archive" which I don't need to backup. I've tried various combinations of &&, -a, etc., and I'm kind of at a loss for getting this right.
Here's the code I have so far:
Code:
#!/bin/sh
# backup subdirs as individual tarballs with prepended timestamps and
# move them somewhere else.
# --exclude "/path/to/dir/*" (Doesn't seem to work)
[Code]...
How can I write that line so that I can loop through all of the subdirs, tarring them up, but excluding the "Archive" subdirectory?
I am programming in bash and really stuck finding directory names. I have a script to find all the .php files on my / partition which will return the whole path. Is there a way to print directory hierarchy with all those values leaving out the forward slashes.
View 10 Replies View RelatedI have a Directory of files over time the directory has become a pain to manage... Its now a few 100GBs each file has a partner .log file so id would want some logic in keeping these together..So I want a script to move the files into sub-directories with a limit or 4GB and then i'll burn each of the directories to DVD.
View 14 Replies View RelatedI'm pretty new to bash scripting, but I really want to wrap my head around it.What I'm trying to do is: From directory "A": Go in to all subdirectories and rename all files within icrementally according to the directory name. SO:
|-- Varian
| |-- FB1-page132.pdf.png
| |-- FB1-page133.pdf.png
[code]...
I am trying to create a function within my .bashrc that will process all of the files that do not end with .sh within a directory and execute them.The following is what I have so far. I am missing a way of excluding files that end with .sh though.
function startall {
for file in /etc/init.d/*.; do
"${file}" start
[code]...
I'm trying to write a bash script that gets the list of files in a directory and puts them into a variable, then checks each entry and outputs them as follows:
item1 is a FILE
item2 is a DIR
item3 is a DIR
etc etc.
I am able to get the list of files into a variable, but unsure how to get the output I want.
In my tmp directory some logs are creating continue (with name logs.txt1, logs.txt2 up to 245). Some times these logs are creating continue within 1 or 3 second gap, now I want to write a bash script that continue monitor the tmp directory and if any time logs create simultaneously within 1 or 3 section gap it will alert me..( generally logs are create with the gap of 5 or 10 minutes duration or some time after one hours )
View 1 Replies View RelatedI have a directory and sub-directories (4 or 5 depths). There are several type with extension in them (*.mp3, *.wma, *.jpg, etc). I would like to copy the whole directory to another location recursively but only *.mp3 files.
View 11 Replies View RelatedI want to read an ftp site [URL]...and download the sub-directory structure and ONLY the tagfiles to the local directory.
FROM THIS:
Code:
slackware
+--a
| |aaa_base-12.2.0-noarch-1.tgz
| |aaa_base-12.2.0-noarch-1.tgz.asc
[code]....
I tried wget + grep but that didn't work too well.