I have a directory and sub-directories (4 or 5 depths). There are several type with extension in them (*.mp3, *.wma, *.jpg, etc). I would like to copy the whole directory to another location recursively but only *.mp3 files.
View 11 RepliesI need this script but I don't know how to do it I have one folder with several folders inside.On each folder a have one MKV or AVI file inside...What I need is a script to change the "modification date" of each folder to the "modification date" of each MKV or AVI that the folder has inside.
View 16 Replies View RelatedI would like to get the filename (without extension) and the extension separately. The best solution I found so far is:
Let FILE="thefilenameofsomefilesfor_instance.txt"
Code:
NAME=`echo "$FILE" | cut -d'.' -f1`
EXTENSION=`echo "$FILE" | cut -d'.' -f2`
I think it would be better to count the len and remove 3 chars to right to get the extension, but it can be macintosh filenames with have 4 chars for extensions.
I'm trying to install a copy of Postgres using the .bin(I want pg Admin III as well which is why I'm not using apt-get). It's sitting in downloads so I did the following:
$ cd /home/ryan/Downloads
$ sudo chmod +x postgresql-9.0.4-1-linux.bin
$ ./postgresql-9.0.4-1-linux.bin
but I keep getting: -bash: ./postgresql-9.0.4-1-linux.bin: No such file or directory I did -ls and the file is there and I can't figure out how to get this installed.
I want to read an ftp site [URL]...and download the sub-directory structure and ONLY the tagfiles to the local directory.
FROM THIS:
Code:
slackware
+--a
| |aaa_base-12.2.0-noarch-1.tgz
| |aaa_base-12.2.0-noarch-1.tgz.asc
[code]....
I tried wget + grep but that didn't work too well.
I have very little linux experience. And need some help with a bash script. I need to a script I can set cron to run to sort files out of a holding folder into final folders. It doesn't necessarily have to be bash, but I think it would be sufficient for this. File names are formatted as such when created: Dest-Date-Time-CID-Destination# I want the files to be moved from a all in one holding folder to a folder structure like this.
.../storage/year/month/day/Destination#/VarX(type)/hour/CID/'File'
I would need an if/else if/else statement to say if Dest = A set VarX = B If for example the file name was
infinity-20100927-17:00-1112223333-4445556666.wav
I would like the above file to end up moved from
.../holding
to
.../storage/2010/09/27/4445556666/Inbound/17/1112223333/infinity-20100927-17:00-1112223333-4445556666.wav
So the script will need to make directories based on information in the file name which is delimited by single dashes. Then move files from the holding folder to the newly created "sorted" folders.
I'm writing a script to execute bash commands in the PHP CLI. I would like to suppress errors from bash and write my own error message if an error occurs. So far I have this (assuming log.txt doesn't exist!):
Code:
tac log.txt 2>/dev/null
Which works as expected, tac kicks up an error but the error is suppressed, but when I use this:
Code:
tac < log.txt 2>/dev/null
I get:
Code:
bash: log.txt: No such file or directory
The tac error is suppressed but bash still gives me a dirty error.
i want to find all files with .h or .c extension and print them on the screen. How can i do it with bash script programming?
View 5 Replies View RelatedI want to do the following.
1. have a directory full of subdirectory
2. Pick the first file from every sub and copy that to the main directory and also rename that file to the same name as the subdirectory's name
3. need to work in commandline best is a simple script.
After i try to find logfiles follow date/month/year. i want copy this files to another directory with name's directory is time you find(date/month/year).
View 4 Replies View Relatedhow can I rename all files in a directory up to the first dot (there by leaving the file extension alone) to the same thing? Im trying to rename all my media files and associated files in a directory to (preferably) the name of the directory it self. if I have
Code:
A Clockwork Orange -
wzzyfg.cd1.avi
wzzyfg.cd2.avi
wzzyfg.nfo
ACO.fanart.jpg
orange.tbn
Id like to automatically mass rename them all to
Code:
A Clockwork Orange
A Clockwork Orange.cd1.avi
A Clockwork Orange.cd2.avi
A Clockwork Orange.nfo
A Clockwork Orange.fanart.jpg
A Clockwork Orange.tbn
I have rename on my server which I used to remove underscores from file names, but I dont know how I would use it to rename everything up to the first period. Bonus points for renaming stuff to the name of the parent folder!
I downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
View 1 Replies View RelatedTo start, I'm writing a script to check a file's date via FTP. Here's the portion that I'm having problems with:
Code:
function checkRemote
{
[code]...
For reasons I won't get into, I need to copy directories so long as the average system load is low. Can someone help me write a BASH script that will copy the contents of a directory, but check to make sure the average system load is below X before copying each file, and if not, wait Y seconds and try again?
View 3 Replies View RelatedI've run into a problem with my bash program.
Code:a mkdir -p /home/chris/Downloads/ARCHIVE/`date -I` find /home/chris/Downloads* -mtime +14 -exec "cp {} /home/chris/Downloads/ARCHIVE/`date -I` ;
It's meant to move old files from my Downloads folder into an archive file (later tar them). The directory exists, I've used $PWD and nautilus and ls to make sure it's there, yet for every file it gives
Code: find: `cp /home/chris/Download/foo.bar /home/chris/Downloads/ARCHIVE/2011-08-19': No such file or directory I tried to test it on a different destination, specifically my home folder. IT still gave me the error.IS it a bad syntax within find or something else? I'm running a 32-bit system with 11.04
I have this code:
Code:
original_content=${content[@]};
echo ${#content[@]} # is 23
echo ${#original_content[@]} # is 1
I'd expect original_content should be copy of content. How to copy array?
I have a lot of filenames (strings) following the same convention
m02_+1+7_London_0000$01.cfg
m02_+1+8_London_0000$01.cfg
m02_+1+8_London_0000$01.cfg
[code].....
What I want to do is to create a script that will interpret the following string and save into variables part of its name
m02_+1+7_London_0000$01.cfg as
------X-Y--City---------
X=1
Y=7
City=London
[code]....
then I want to copy the files that go all the files with the same City and X and Y to the same subfolder City/MX.Y I will need some help start doing that. And I think the first would be to get part of the filenames strings into variables.
i have one questions :"bash copy filename destin_dir"1- i need a bash script to copy file from one directory to another , and if the destination directory have the same file name, add '_1' to the file name ..and if there is a file with 'filename_1' , add '_2' to the file name and become 'filename_2' and so on
View 5 Replies View RelatedI have to copy some log files with a cron job; I'd like to copy only the newer files added because I run the script with a weekly cron. all the log files are named like "10-03-29.CVS" and reside in a dir. When I copy I'd like to copy only the files not already copied with the last cron job.
View 8 Replies View RelatedI am trying to rename a lot of files but need to keep the extension :
the files are films names :
a.b.c.d.***.iso
the result should be replacing "." by spaces " "
this command :
for files in *.iso ; do mv "$files" `echo "$files" | tr '.' ' '`; done
put a space also before the extension iso ??
How can I rename files from
"a.b.c.d.iso" to "a b c d.iso"
I am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
I am trying to create a simple bash script to rsync some folders within a directory stucture. I am using wild cards, in the rsync source directory structure, but my command always fails. I believe it is the way I am using wild cards within my for loop. Here is my command ;
Code:
for seq in `cat test.txt` ; do rsync -nvP /folder/folder/folder/folder/folder/**/$seq /folder/folder/folder/ ; done This always fails, where if I do a ls to the destination, to test the path, it always works.
I know how to redirect the output of a terminal to a file. For example, if I want to list all the files in ~/Documents and output to a file called test.txt, I would do this: ls ~/Documents > test.txt The question is, can I copy the output to test.txt AFTER I have carried out the command? This would mean that I wouldn't have to know in advance whether I want to copy the output to file. I want to do something like this: ls ~/Documents Then this: <bash command for copying standard output to test.txt>
View 2 Replies View RelatedOriginally Posted by Kenny_StrawnPlease wrap [CODE] tags aroung any code posted here. The full source that way could still be posted.I am trying to copy all the files in the directory based on the modification date (i.e created on Dec 29). Not able to find the proper command for this. This is what I have tried.
(none) login: root
#
# cd /mnt/hd/
[code]...
How to copy a file from remote to local directory and vice versa using ftp bat script file in telnet.
View 1 Replies View RelatedI need a script to copy music from a network drive to my local disk. I require the script to auto mount the remote server, then to create the directory path to the mp3's I have a list of all teh songs in the following format, note some have spaces.
\7800SPARE4UsersPublicMusicSample MusicKalimba.mp3 \7800SPARE4UsersPublicMusicSample MusicMaid with the Flaxen Hair.mp \7800SPARE5UsersPublicMusicSample Song Sleep Away.mp3
I can use the following to mount the directory:
mount -t cifs //7800SPARE4/Users /dest-o username=user,password=pass
I'm thinking the best way would be to get the share name 7800SPARE and the grep for all these in the list, then mount it and do a while read LINE However I would need to creat the folders, I am unsure on how to do this. I think I would need to sed the backslashes to forward ones and then use rsync? Then unmount and move on to the next ones, if I can't mount the share It would be nice to log it and skip it.
I have a (rather large) database of mp3 track information. I also have several directories of the actual mp3s. I'm trying to write a simple bash script that will check the contents of the directories against what's in the database, and upon finding a file that isn't in the database, do something.
Here's what I have so far:
Code:
The trouble I'm having (in the sample directory of "/mnt/music/B/Beatles, The/" the file "Beatles, The - Taxman.mp3" isn't in the database.) is getting it to actually trigger an error when an entry isn't in the database.
Once triggering on a non-entered file is working, any way to get it to traverse the entire /mnt/music hierarchy?
I've got the following code and kludge. It's working okay except that there's a directory called "Archive" which I don't need to backup. I've tried various combinations of &&, -a, etc., and I'm kind of at a loss for getting this right.
Here's the code I have so far:
Code:
#!/bin/sh
# backup subdirs as individual tarballs with prepended timestamps and
# move them somewhere else.
# --exclude "/path/to/dir/*" (Doesn't seem to work)
[Code]...
How can I write that line so that I can loop through all of the subdirs, tarring them up, but excluding the "Archive" subdirectory?
I am programming in bash and really stuck finding directory names. I have a script to find all the .php files on my / partition which will return the whole path. Is there a way to print directory hierarchy with all those values leaving out the forward slashes.
View 10 Replies View RelatedI am trying to write a simple script to list all the files in a directory. The script I wrote was as below where the pdb_files is a directory and all the files which I want to list are in that folder.
Code:
files=`ls -F pdb_files/*THERMO*`
for inFiles in $files
do
echo $inFiles
[Code]....