Programming :: Find The Files With Extension .h Or .c With Bash Scripts?
Feb 3, 2011i want to find all files with .h or .c extension and print them on the screen. How can i do it with bash script programming?
View 5 Replies
ADVERTISEMENT
Programming :: Bash: Get Filename And Extension Using Bash?
Jan 9, 2010I would like to get the filename (without extension) and the extension separately. The best solution I found so far is:
Let FILE="thefilenameofsomefilesfor_instance.txt"
Code:
NAME=`echo "$FILE" | cut -d'.' -f1`
EXTENSION=`echo "$FILE" | cut -d'.' -f2`
I think it would be better to count the len and remove 3 chars to right to get the extension, but it can be macintosh filenames with have 4 chars for extensions.
Programming :: Bash Find Files On Time Help?
Mar 11, 2011I am trying to find a nightly backup if it was successfully copied over, rename it and curl, but it's always passing the check even if the file is older than specified. From the command line it does as it should. Example is here;
Code:
find /backup -type f -mmin +4440 -exec echo "found" {} ;
- nothing returned (good). Then I change the time
[code].....
Programming :: Bash Script To Find Newest Files And Count Them?
Feb 25, 2010I'm working on a bash script that will go through a directory, find the sub-directories that have been created since the last time the script ran, count the results, and output that integer (will most likely be '1' or less per each instance run) to a file. Give the circumstances, my previous (and very limited) experience with bash is not sufficient for me to pull this off. since it probably has bearing, is that my mail server stores files that it flags as viruses in a folder. It creates a sub-directory for each virus that it quarantines .I want to count those subdirectories and graph them with MRTG. Hence the script. I'm going to post what I've got so far and the purpose of it, because I'm told I have a very odd and efficient way of doing scripting.
[Code]...
But then it dawned on me that it wouldn't work because I would have to not count the directories that have already been counted and count the ones that have not been counted. Given that the purpose of this is to generate a graph about every 5 minutes, using find won't work because, to my knowledge, that will only find things based on whole day values, I need it almost down to the minute.
Programming :: Bash Script To Find And Remove Similar Lines From Multiple Files?
Jun 5, 2009I want to remove duplicate or multiple similar lines from multiple files. I.e. if I have four files file1.txt file2.txt file3.txt and file4.txt and would like to find and remove similar lines from all these files keeping only one line from these similar lines. I only that uniq can be used to remove similar lines from a sorted file.
View 9 Replies View RelatedProgramming :: Bash Script To Copy Specified Extension File From A Directory?
Mar 12, 2010I have a directory and sub-directories (4 or 5 depths). There are several type with extension in them (*.mp3, *.wma, *.jpg, etc). I would like to copy the whole directory to another location recursively but only *.mp3 files.
View 11 Replies View RelatedUbuntu :: Find Files With An Extension, Then Mail The Results?
Jul 2, 2011Is there an easy way to do a recursive command line search on a path for a particular type of file extension?I want to build a script that will check for the existence of any .xxx files in a recursive path, if they exist, I would like to run the "mail" command to send me a message. I already have mail running on he server.My thoughts were to tryQuote:ls -R |grep .iniorQuote:find . |grep .inibut neither of those return only the .ini files, they also return files that are named such as .ini.bak, .ini.original, .ini.old, ect...
View 2 Replies View RelatedGeneral :: Find Files With Specific Extension And Move To A Directory?
Apr 18, 2011I need little help. I want to find all files with extension "*.tar" "*.gz" and "*.zip" and move all those files into "/opt/old" directory. I've tried this command:
Quote:
find . -type f -name "*.tar" "*.gz" "*.zip" -print0 | xargs -0 -r mv /opt/test
It's not working, something wrong after "mv" i guess.
Programming :: Invoking Extension Files In Ubuntu?
Nov 18, 2010I'm doing a project in Unix version Ubuntu 10.04. I'm doing an standalone app using C++(Qcreator) and GMT(generic mapping tool) so i need help in the following: how to invoke any extension files using C++?
View 1 Replies View RelatedProgramming :: Rename Files Recursively, Only Keeping Last X Digits Plus Extension?
Nov 29, 2009My problem is this:I have a number of directories, all containing files of different name lenghts, including letters, numbers and possibly spaces. I want to recursively rename all of these files, so that only the _last_ 5 digits (not counting the extension) remain. In other words: I want to cut off all but the last 5 digits and not touch the extension.
I've tried to read up on tr, rename (perl version), sed, cut etc. and browsed through some threads here, but so far couldn't quite figure out how to do it.
If someone could point me to the right (standard) CLI tools and syntax.
General :: Bash: Find Folders With Less Than X Files?
Sep 18, 2010How would I go about finding all the folders in a directory than contain less than x number of .flac files?
View 2 Replies View RelatedProgramming :: Find And Replace Script In Bash?
Sep 28, 2010Im looking for assistance to create a script to find and replace files.Probably best if I give you the background Our server uses a specific application which stores user data, each user data account (a folder on the server) has a file called 'Profile.xml' this file gets updated and replaced about every 30 mins similar to the fashion logrotate works i.e. Profile.xml.1 Profile.xml.2 -> .10
What we experience is that if the application crashes unexpectedly while it is doing its user profile refresh task we end up with sometimes a few hundred Profile.xml files which end up 0kb(should be around 4kb) , and our server see's these as corrupted profiles and will not see them. Our fix is to go back thru and rename the Profile.xml.1 to be Profile.xml (or sometimes up to Profile.xml.5 to Profile.xml) We want a script we can manually run to automate this process The server tree is
/mnt/array1/username/db/Profile.xml
/mnt/array2/username/db/Profile.xml
etc
etc
What we have so far is a script which finds the affected files
find /mnt/ -maxdepth 4 -name Profile.xml -size -1k
This will display a list of affected profiles, and we can append it to a text file with >>output.txt on the end.
if 'pattern' in 'location' equals '0kb' then 'cp' Profile.xml.1 Profile.xml
Programming :: Bash Programming - Rename Files In A Loop?
Mar 31, 2011I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
Programming :: Write Shell Script That Adds An Extension ".new" To All The Files In A Direct?
May 28, 2010How to Write a small shell script that adds an extension ".new" to all the files in a directory.
View 2 Replies View RelatedGeneral :: Find The Bash Source Files Of Programs In Mac OSX?
Jan 6, 2011I am currently writing some convenience methods for my terminal in my bash_profile and am sure if what I am writing is "the best way". I figure a good way to verify whether what I'm doing is right or not would be to find some source code of more established programs and see how they do it.My question then is, where can I find this code on my Mac? An example is, with Macports installed, where is the source code that opens the port interactive console when I type nothing but "port" in my shell?(I added Linux in the title even though I am on a Mac because I assume the answer would be the same for both)
View 3 Replies View RelatedGeneral :: Find Duplicate Files Using Bash Script ?
Jun 8, 2010What kind of method to find the duplicates files on linux,
1.how to find just using the file name, sometimes i figure out people often to copy their files to another directory and i want to find out if there any same file name in the linux box.
2. what about if i want to find the duplicate files based on contents of the file, example is in picture file if users store picture files from digital camera first they just save the file name in default but when they want to give that picture to others they will rename it, i've been used method md5 for this situation in python script but it takes long time
I'm asking this question just to know to use bash script a lot in work and i want to test out fdupes at home, is fdupes use similar md5 scan to find duplicate files?
Programming :: `find . -exec' Handling Backticks In Bash
May 15, 2011i had a problem with the find command in bash (which i deem is close enough to a promming language, if not please move this thread :P). i tried to reduce the command to the problem. i want the backticks, or $() for that matter; to be evaluated by -exec of find, not by bash. is that a caveat of find?
Code:
$ find testd -exec echo `basename {}` ; #confused me
test
test/a
test/b
[code]...
edit: i found out whats causing this. `basename {}` gets evaluated by bash before find is invoked, returns {} and `find . -exec echo {} ;" is run. now my question is, how to escape this eveluation from happening before.
Programming :: Find Out If X11 Is Running From Within Perl OR Bash Script?
Mar 17, 2010I am writing a script based image manipulator but i need to know if X is running so i can tell if i use CACAVIEW to imagemagick DISPLAY command.
View 14 Replies View RelatedGeneral :: BASH: Find Duplicate Files (MAC/LINUX Compatible)?
Mar 18, 2011I am looking for a bash script which is compatible with Mac, to find duplicate files in a directory.
View 2 Replies View RelatedGeneral :: Bash - Command To Find Files Changed In Last N Seconds?
Jun 21, 2011Linux command to find files changed in last n seconds. shell script,that we can run from cli or command.
View 3 Replies View RelatedProgramming :: Find String In Text File (bash Script)
Apr 17, 2011write such script (bash script). I have some text file with name filename.txt I must check if this file contains string "test-string-first", I must cut from this file string which follows string "keyword-string:" and till first white-space and save it to some variable.
For example. File: PHP Code: PHP Code:
Start 15022011 Eng 12-3-42
SN1232324422 11 test-string-first
SN322211 securities
HH keyword-string:123456321-net mark (11-22)
[Code].....
Programming :: Find A Substring/member In A String/array Using Bash?
Oct 13, 2010This may be a basic bash array/string operation related question, but I couldn't find any direct answer. So here it goes:I have a lot of data sorted in various directories. All directories need same processing except for a special group of directories. I have a symbolic link of the script in discussion in each directory. I want the script to get the name of the current directory, check if that belongs to special group and do specific operations.So I get the name of the directory
Code:
mm=`basename `pwd``
Now the the group of directories that needs something different to be done, contains these
[code]...
Programming :: Command For Find/Replace In Text Files (inc. Files In Sub-folders)?
Oct 11, 2010I found this command that works great finding and replacing a simple string to another in files located in that folder and all sub-folders.
Code: find . -name '*.php' | xargs perl -pi -e 's/OldText/NewText/g'
The problem I have is that I need to replace a more complex string, like this: Old string: /mnt/stor6-wc2-dfw1/627896/982574/ New string: /mnt/stor8-wc2-dfw1/369587/302589/ There I don't know how to do it... since the / is what separates the old from the new strings, and the strings that I want to replace have / in it. Also, I would like to know how to specify under what folder replace the files, for example, I want that it search/replaces all files under /var/www/mysite/htdocs folder.
Ubuntu :: Write A Bash Script Which Will Find Files Then Move Them To A Specific Directory?
Sep 1, 2011I'm trying to write a bash script which will find files then move them to a specific directory.
So far I have:
Code:
#!/bin/bash
#script to find and move files
src_dir="/path/to/source/directory"
des_dir_mov="/path/to/destination/directory/for/movies"
des_dir_img="/path/to/destination/directory/for/images"
find $src_dir -iname '*.avi' -type f -exec mv '{}' $des_dir_mov ';'
I'd like to have all the possible movie file types then the image file types checked in a loop.
Every time I try to include an array in this script it breaks
Programming :: Bash - Recursive Find - Create Parent Folder - Moving File
Dec 5, 2010I'm starting bash shell script and I'm looping without any solution.
I'm trying to find some files under a folder hierarchy and in case of errors moving these files to a destination folder under the same hierarchy recreating this hierarchy if not exists.
Finding all ._* files under /src and moving them to /dest recreating folder1 or the others which contains ._* files but without moving files which does not correspond to the pattern.
Code:
I tried find command and I'am getting all needed files
Code:
But I don't know how to use the output to get the parent folder of files which are found to
1- create folder with mkdir -p /dest/folder1 or /dest/folder1/folder4
2- move found files from /src/... to /dest/... with rm command
I'm working on a find command as this trying to do all in the same line but ... little lost
Code:
Programming :: Find And Replace A String In A File Using Perl Command From Bash Script?
Feb 14, 2011I wanted to find and replace a string from a perl file. I have written a script in bash which runs the following command.
perl -pi -e "s/$findstring/$replacestring/" testfile
where as $findstring = print F_WC_TMP"$line
";
and $replaceString = $line = join ' ', split ' ', $line; print F_WC_TMP"$line
";
But when I am running the above command, i think it is replacing the $findstring with the above mentioned string and hence it contains a $line, it is looking for the variable $line and not finding the exact string. I am confused about how to search for a string that contains $ in it and replace it with another $string.
Programming :: List Files In Bash + Add Url Before Them?
Dec 8, 2010I am an uploader to a various hosts, so this tiny script me a lot. I make a rar archive and split files with 100mb. I could get 3-4 or even 76 parts of rar files and it would take me some time to paste all these urls to remote upload function of filehosting sites. For example:
Code:
server:/home/cober/downloads/teevee# ls -al
total 358784
drwxrwxrwx 2 root root 4096 Dec 8 19:38 .
[code]....
Programming :: Bash Script To Copy Files?
Jul 13, 2011I have a lot of filenames (strings) following the same convention
m02_+1+7_London_0000$01.cfg
m02_+1+8_London_0000$01.cfg
m02_+1+8_London_0000$01.cfg
[code].....
What I want to do is to create a script that will interpret the following string and save into variables part of its name
m02_+1+7_London_0000$01.cfg as
------X-Y--City---------
X=1
Y=7
City=London
[code]....
then I want to copy the files that go all the files with the same City and X and Y to the same subfolder City/MX.Y I will need some help start doing that. And I think the first would be to get part of the filenames strings into variables.
Programming :: Bash Function For Searching Files ?
Jun 15, 2011I'm making a small script for searching and doing some operations with photos, but I'm kinda stuck on this little function:
Code:
function findallformat {
prefix=""
if [ $1 = -pre ] then
[code]....
That function should find for every file with a certain type; and you can specify a prefix using a "-pre" followed by the prefix that you want to search. The format should be "stackable", so you can use as many types that you want, without repeating the same function on the code.
Example: findallformat -pre IMG_ .JPG .CR2 #That should search files that start with "IMG_" and finishes with .JPG and .CR2. My problem it's that, when I try to use it on the script, it says "bash: syntax error near `token' unexpected `}'"
Programming :: Catch Some Outputs In Two Different Log Files In Bash?
Jan 26, 2009I want to catch some outputs in two different log files in bash, file simple.log and all.log So far, the script is started like this:
Code:
xterm -e "(./myscript.sh | tee -a simple.log) >& all.log"
What I want is:
- In simple.log, I want all the stdout but WITHOUT errors.
- In all.log I want BOTH stdout and stderr.
So all is ok, and the output becomes:
all.log
Code:
starting copying files
mv: cannot move ... : permission denied
copying completed
simple log
Code:
starting copying files
copying completed
But, in the new xterm, I'm loosing stdout. There is no output.How can I have the files logged as they are but also have the stdout in the xterm.