OpenSUSE :: Samba Can Not Reconnect
Jul 23, 2011
Having these issue with samba, after random time (it can be after 20 min or after 5-8min) my client mashine on windows 7 disconnects from opensuse 11.4 kde server. When i refresh disk on windows I am getting message that local device is already in use and that connection has not been restored.
I need to go to my suse and type service smb restart but these command usualy dont work I need to retype it for few times until windows can reconnect. it happen quite offen, hapend while wathing movie from shared disc...
View 9 Replies
ADVERTISEMENT
Jan 18, 2010
My network connection breaks almost every day. I don't know whose this problem - is it my system or my provider. Everything goes ok until some moment when network disappears and ping my gateway returns "Unreachable host". In that situation I usually plug out cable and plug it in again - now network works.
I wounder if there is a way to do something from console which has the same effect as plugging out/in cable? Or may be more preferred way - can I know what exactly doesn't work when network disappears? What i must repair? May be it save me from reconnecting cable
View 9 Replies
View Related
Mar 11, 2011
I upgraded my openSUSE to 11.4 and wifi was still working out of the box.
However now when I turn the wifi off using the hardware button and than back on, or when I wake up from hibernate, (k)networkmanager won't recognize the wifi device... I actually have to run /etc/init.d/network restart to reconnect to network. The problem is that it worked in 11.3... why not in 11.4? Now every time I hibernate my laptop I had to manually restart network. In 11.3 it was automatic...
View 6 Replies
View Related
Apr 10, 2010
I have my openSUSE 11.2 connected to router by wifi. I want frequently to access it from my LAN or even Internet, but even so frequent the connection is lost for some reason.
When I am at the box, I can easily do a ifdown/ifup and it will reconnect, but that is a pain when I am not local.
is there some way or maybe a script to check the connection so now and then and if not online then re-connects it automatic ?
View 2 Replies
View Related
May 14, 2010
i cant get Qinternet to auto reconnect when connection is lost due to dynamic IP changes from my ISP.Im using Ifup method.Thing is, every 24 hours, ISP changes my IP and thus, disconnects me from the internet. I need it to reconnect but dont know how to do it.
View 9 Replies
View Related
Jan 6, 2009
Just having updated from SuSE 10.3 to 11.1 I'm struggling with some network issues. WLAN connection setup with Network manager worked, the connection comes up on login to KDE 3 and works for some time. All of a sudden, the wlan connection fails and reconnection via NM is not possible. The normal wired ethernet stays fully operational and connection is established at plug in of the cable. I tried to track the issue down by browsing through /var/log/NetworkManager but I did not find the answer. A rcnetwork restart brings back a fully operational network including wlan connectionvia NM.
Working connection fails, NM fails to reconnect:
Code:
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: associating -> associated
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: associated -> 4-way handshake
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake .....
View 3 Replies
View Related
Dec 31, 2010
I have a ppoe internet connection. I was easier and faster to configure it in Yast than in Windows XP. When
The provider here sometimes goes through some problems and the connection may disappear and return at any unexpected moment. In Windows there is a icon on system tray that dysplays such information and I know when the connection is gone. It also allows me to try to reconnect manually. Where do I find these information on Opensuse here do I manage to reconnect. In Windows it was also possible to set the connection to re-dial automatically when it was out. It was very useful if it failed in the middle of a download, the system reconnected and the download manager retried until download resumed. Is there some way to adjust opensuse to reconnect automatically when connection fails or some software that does it? Furthermore, is there a good download manager that works in Opensuse that pause, accelerates downloads and retries when connection fails?
View 3 Replies
View Related
Sep 8, 2011
I have problem with my wireless GSM connection , my notebook has built-in Toshiba (in fact Ericsson) F5521gw wireless modem , it is detected and usable by default without installing additional software.Problem is that I can connect flawlessly only once after switching on notebookif I disconnect manually I'm not able to connect again, i have to reboot my computer or another solution which allows me to reconnect is closing and opening lid (putting notebook in suspended state)I'm using Toshiba Tecra r850, openSUSE 11.4 x64 on Gnome 2 DE, using NetworkManager and nm-applet /var/log/messages after using disconnect from nm-applet:
Code:
Sep 8 17:04:39 linux-b5nl pppd[9933]: Terminating on signal 15
Sep 8 17:04:39 linux-b5nl pppd[9933]: Connect time 243.2 minutes.
[code]....
View 5 Replies
View Related
Sep 6, 2010
I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behaviour when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information.
uname -r
Code:
2.6.27.48-0.2-pae
/sbin/lspci
Code:
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection
/sbin/lspci -n
Code:
03:00.0 0280: 8086:4237
/sbin/lspci -nnk
Code:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection [8086:4237]
Kernel driver in use: iwlagn
Kernel modules: iwlagn
dmesg
Code:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
firmware: requesting iwlwifi-5000-1.ucode
The dmesg output shows firmware request (highlighted with red font), but I have already installed the firmware using YAST.
View 2 Replies
View Related
Jul 26, 2010
Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
View 1 Replies
View Related
Jun 1, 2015
On my Raspberry (I know but I could not get any response in raspberry-forums) running raspian I have a problem with a bluetooth-keyboard.
It has bluez 4.99-2 installed and I was able to pair the keyboard and make it trusted and when I run "bluez-test-input connect <address>" I can use it as an input device, but the problem is that when the keyboard goes into a standby-mode after some inactivity the connection is lost and not reestablished. To make it work again I have to run the bluez-test-input command again.
Now when I use the keyboard on my Android-device it also goes into standby but as soon as I start to type again it automatically reestablishes the connection - this is what I would like to achieve on the Rasperry.
My fundamental problem is that I don't know anything about bluetooth really...
I assume that on Android the keyboard initiates a connection when it comes back from sleep but on Raspbian the connection is initiated from the Pi and when the connection is lost the keyboard may try to reconnect but maybe there is no "bluetooth-server" on the Pi to accept the connection but that is just guesswork from someone that really has no clue...
View 0 Replies
View Related
Oct 26, 2015
I have done a clean install of debian 8.2 (jessie) on a new PC. I am working through some of the issues that were not correctly installed. One of them is the wireless network. On startup, I have a wireless connection. At some point within the first 5-25 minutes of being logged in and doing computer stuff (there is no known action that leads to the reaction), the wireless disconnects from the network and will not reconnect. The network-manager-gnome shows three horizontal dots; the system settings> network shows all of the available networks, the strength of their signal, and the "connecting" circle spins. This behavior occurs with both WPA and insecure networks.
I have followed the guidelines for Debian>WiFi>HowToUse (https://wiki.debian.org/WiFi/HowToUse). Nothing appears amiss when following the Network-Manager>Gnome portion of the instructions. I was going to try the alternate WICD program, but one has to uninstall network-manager to use wicd and synaptic also wants to remove something called "gnome", too-- uninstalling a package with that name makes me uneasy. I have noticed that the installed versions of network-manager (0.9.10.0-7) and network-manager-gnome (0.9.10.0-2) don't exactly agree, but I doubt that that is significant.
root@fayalite:/home/agnewton# iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"Mineralogy"
Mode:Managed Frequency:2.472 GHz Access Point: 64:E5:99:2C:A0:7E
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-18 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
[CODE]..
View 8 Replies
View Related
Mar 5, 2010
I didn't find a solution to making my 3G/GPRS "modem" reconnect automatically when the connection fails, so I made a solution of my own. It's very annoying when you're downloading a file overnight, only to find that the connection has failed 5 min after you went to sleep.Restarting the NetworkManager daemon makes it automatically connect to all configured interfaces, including 3G/GPRS, so I made a simple script to do that.First, we check if the modem is even connected. Replace Huawei with the brand you're using. Any unique word on the line in lsusb will do fine as well. Then we check if the connection is up, and if it is, we simply exit. Otherwise, the NM daemon is restarted, which causes the 3g/gprs to reconnect.
View 2 Replies
View Related
Jan 3, 2011
EDIT: Question removed; I wrote a small howto below.
View 1 Replies
View Related
Nov 27, 2010
i use ppp to connect to a VPN, and i need it to auto reconnect when i looses connection. How do i make it work?I use Debian.
options.pptp settings:
lock
noauth
[code]....
View 1 Replies
View Related
Sep 28, 2015
I use Debian Jessie 8.2 and I am using a 3G connection using this modem => [URL] ....
The 3G connection works fine, except after 24 hours the connection drops and I cannot reconnect. If I reboot the computer, the connection will work again.
My guess is that my ISP gives me a new IP address after 24 hours and somehow my system cannot handle it.
How can I reconnect my 3G connection without rebooting?
I have already tried the following commands:
Code: Select allsudo service network-manager restart
Code: Select alldhclient -r eth0
dhclient eth0
Code: Select allsystemctl restart ModemManager
Results of journalctl and grepping my connection name (SFR)
Code: Select allsept. 22 17:58:19 ark1 NetworkManager[512]: <info> Policy set 'SFR Web / Prepaid 1' (eth0) as default for IPv4 routing and DNS.
sept. 23 18:17:07 ark1 NetworkManager[9446]: <info> new connection /etc/NetworkManager/system-connections/SFR Web * Prepaid 1
sept. 23 18:17:08 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR Web / Prepaid 1'.
[Code] ....
As you can see sept 22 at time 17:58 is when the computer started up. And roughly 24 hours after it failed to reconnect.
Also I should mention that there is a script to run the command:
Code: Select allsudo service network-manager restart
if the computer cannot ping a server, ie if the connection is lost.
More journalctl info when the system tries to reconnect:
Code: Select allsept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR'.
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) starting connection 'SFR'
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
[Code] ....
View 3 Replies
View Related
Oct 1, 2015
I'm running jessie on virtualbox.
I set staticIP at /etc/network/interfaces.
When I stop/start vm(not restart), dhclient becomes up and ip is assigned by dhcp. Why?
--------------------------------
yoshi@vbox:~$ uname -a
Linux vbox 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) x86_64 GNU/Linux
--------------------------------
yoshi@vbox:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
[Code] ....
View 1 Replies
View Related
Jan 29, 2010
wireless disconnects after a few hours, there is a 50/50 chance that the reconnect fails. if it fails i am asked for the wpa2 key, if i hit cancel and try to connect manually after 2 minutes it connects most times. if i enter the wpa2 key and hit connect i won't get any connection. reading the loglife of my router shows that my laptop connects and disconnects in a 7s rhythm. a restart solves this problem (is there a command to manually restart the network without the need to restart?
laptop: packard bell easynote w1000
ubuntu 9.10
lspci -v readout:
Code:
Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Subsystem: RaLink Device 2560
[Code]....
probably related, after suspend or hibernation networking is disabled, enabling it via right-click does not work again after a restart everything works how it should.
View 4 Replies
View Related
Jun 15, 2010
how this might be done?? I did not find an -o reconnect in the options.
View 1 Replies
View Related
Sep 21, 2010
I just started using Ubuntu at the advice of a friend. I am running it from a flash drive.I have a wired network that always works fine with Windows on this computer.After starting up Ubuntu it connected right up and I was able to use it. Then, out of the blue the machine shut off. Upon restart, I was unable to connect to the internet.I reinstalled Ubuntu to a different flash drive and it worked fine once again.I left the computer running while I went out for supper, returned and the computer was "asleep" and would not wake back up.I shut off the computer and restarted Ubuntu.No internet again. As always, it works fine in Windows.Also, BOTH times this has happened, the OS says I am connected to the internet, and I can turn the connection on and off, but it is not connected. This happens even if I reboot the computer. (I have a cable connection.)
View 2 Replies
View Related
Nov 18, 2010
I installed Kubuntu on my PC I want to use remotely, without having keyboard, mouse nor monitor connected to it. So I want it to reconnect automatically if it loses the connection.
I upgraded to newest version of kubuntu, so I have KDE4 and newest network manager app. I have password set to my KDE wallet, so I enter it on boot and the app connects.
But then if kubuntu loses connection and tries to recconect a window appears with "secrets", where I have network connection screen, the password for my wireless network is already in the necessary field and all I have to do is press OK.
Well, I don't want that window to appear. The app already remembers my password, it detects it has to reconnect, but it makes me confirm the password is correct? I want to make it just connect, without my input. But I have no idea where to look.
I've checked the options in network manager, but nothing on that. Then I don't want to change the app if I won't have to, linux tends to be pretty touchy with my network card and I'm afraid it could stop detecting it or something...
Edit: The window appeared again so now I can put full title of it: "Secrets for [NetworkName] - KDE Daemon". Under it I can choose security type for [NetworkName], there is field for password, with the password already inserted and "show password" field under it. Oh, and OK button.
Edit 2: Obviously KDE wallet has "always allow" option for KNetworkManager.
View 1 Replies
View Related
May 26, 2011
I'm having a problem with the wireless on my Asus EEEPC 1000HE using Ubuntu 110.04. Digging into the laptop forums, it says there is a problem with wireless on some models of the 1000HE, but it is not the same wireless device and my wireless problem doesn't seem as bad as listed, so I think it's a different problem. But my problem is that if wireless drops for any reason, it will not start working again unless I either reboot the computer or click the wireless icon in the systray, click disconnect so it stops flashing (like it's trying to reconnect) and then suspend my computer or log off and back on. And it only does the latter because I added a file located at /etc/pm/config.d/00sleep_module with the one line that reads SUSPEND_MODULES="rt2800pci" (my wireless driver) So that one line seems to cause wireless to get a fresh connection after suspending (or something. I'm not a very advanced LInux user). I've tried running the command "sudo/etc/init.d/networking restart", but that does nothing for me. I'm not sure what other command to try to see if can fix it.[URL]
View 3 Replies
View Related
Aug 16, 2011
Here is my problem:
I can reconnect to internet after disconnecting (this happens every 3-4 hours) only if I manually poke out and in ethernet cable to network adapter or reboot ubuntu. Even restarting network-manager not helps. My provider provides internet over pppoe. I have "DSL-connection 1" item in network managers gui menu. And that item disappears after disconnection.
pppd runs with following arguments: lcp-echo-failure 3 lcp-echo-interval 20 So where can I change this parameters, where is that configuration file?
View 3 Replies
View Related
May 3, 2010
I am using WICD as my wireless network manager and it works connecting to a network for the first time. But when I resume my laptop from hibernate or standby, WICD will not reconnect to the network and gets stuck on obtaining an IP address. And if I try to change networks without hibernating I get the same problem. Also, I notice that the network name is stagnant. I connect to multiple wifi networks a day because of school. When I leave my "home" network and connect to my "school" network WICD still says "Homebtaining IP address" even thought it should say "schoolbtaining IP address." My thoughts are that it isn't releasing the network properly and when its trying to connect it can't because it still thinks it's connected. The only solution I have found is to restart my laptop every time I want to connect to a new network, or shut down every time I am done using my laptop, which is a major inconvenience.
Here is what I am using:
HP tx2000
Broadcom BCM4322
Ubuntu 10.04
WICD 1.7.0
View 5 Replies
View Related
Mar 3, 2010
Sometimes I am unable to reconnect to my wireless AP using the same settings that worked the previous day, and that has me stumped. I think it's due to me switching access points (using different authenticatin) since the last connection.
1) After I enter iwconfig/iwpriv commands to connect my wireless usb card (edimax) to my WPA2 network, what process performs the negotiation with the AP, and is there a way to see status debug messages from that process so that I can see if there was a successful negotiation? (so I can see if the password is correct, etc).
2) Is there a way to manually invoke that process to re-attempt to negotiate? Or must I assume that happens automatically with any iwconfig/iwpriv command?
3) Is there a simple command that will erase all iwconfig/iwpriv settings so that I can start over with my iwconfig/iwpriv commands?
View 1 Replies
View Related
Dec 9, 2010
I'm running squeeze testing. I have noticed an issue with the way NetworkManager acts when the wireless connection is dropped. I believe it should automatically reconnect but it immediately puts up a dialog requesting me to enter the wifi password. This dialog stays indefinitely until I intervene and click "OK" (the password from the previous successful connection is still there). I would think that something as basic as wireless networking should not require 24 hour human interaction to stay connected. I have considered a cron job checking the network status and restarting it if necessary, but there is a configuration change or something else I can do to resolve this.
View 3 Replies
View Related
May 23, 2010
I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows:
hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular"
[code]....
View 1 Replies
View Related
Feb 24, 2010
I did a fresh install of ubuntu 9.10 yesterday while trying to get my wireless working again (a problem for another forum). I have previously put my home folder on a separate partition.Having foolishly assumed that it would pick up the home folder as such after the install. Of course it didn't. The partition is still intact but it is not being recognised as the home folder.
View 6 Replies
View Related
Apr 18, 2010
Recently I've installed Ubuntu 9.10. I have DSL connection so, I wrote all details needed. After trying to connect on it, it automatically disconnects and connect auth connection again. I have worked on 9.04 and older versions and used to work very good, also the internet connection, but not in 9.10.
View 5 Replies
View Related
Nov 1, 2010
Running Ubuntu 10.10, and I can't get my WUSB100 v2 Linksys adapter to work. I've tried what's in this thread: [URL] Entered lsmod |grep rt into Terminal and found out it runs on the rt2800 chipset, so I blacklisted everything necessary. It finds and connects to my network but after about 10 minutes it disconnects and won't reconnect.
View 6 Replies
View Related
