Ubuntu :: Curlftpfs Automatically Reconnect To Server?
Jun 15, 2010how this might be done?? I did not find an -o reconnect in the options.
View 1 Replies
ADVERTISEMENT
OpenSUSE Hardware :: 11.4 - Wifi Won't Reconnect Automatically
Mar 11, 2011I upgraded my openSUSE to 11.4 and wifi was still working out of the box.
However now when I turn the wifi off using the hardware button and than back on, or when I wake up from hibernate, (k)networkmanager won't recognize the wifi device... I actually have to run /etc/init.d/network restart to reconnect to network. The problem is that it worked in 11.3... why not in 11.4? Now every time I hibernate my laptop I had to manually restart network. In 11.3 it was automatic...
Ubuntu Networking :: WICD Not Automatically Reconnect After Suspend Or Hibernate
Feb 22, 2010I'm actually running Debian Lenny and using WICD. Sometimes when I wake the system up from standby it reconnects me to my wireless connection, but sometimes it wont. (Same thing for hibernate). On the times that it wont work it just hangs at obtaining IP address.
View 1 Replies View RelatedDebian Configuration :: The Network Doesn't Automatically Reconnect
Dec 9, 2010I'm running squeeze testing. I have noticed an issue with the way NetworkManager acts when the wireless connection is dropped. I believe it should automatically reconnect but it immediately puts up a dialog requesting me to enter the wifi password. This dialog stays indefinitely until I intervene and click "OK" (the password from the previous successful connection is still there). I would think that something as basic as wireless networking should not require 24 hour human interaction to stay connected. I have considered a cron job checking the network status and restarting it if necessary, but there is a configuration change or something else I can do to resolve this.
View 3 Replies View RelatedOpenSUSE Wireless :: 11.1 - WiFi Randomly Disconnects / Reconnect Automatically
Sep 6, 2010I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behaviour when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information.
uname -r
Code:
2.6.27.48-0.2-pae
/sbin/lspci
Code:
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection
/sbin/lspci -n
Code:
03:00.0 0280: 8086:4237
/sbin/lspci -nnk
Code:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection [8086:4237]
Kernel driver in use: iwlagn
Kernel modules: iwlagn
dmesg
Code:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
firmware: requesting iwlwifi-5000-1.ucode
The dmesg output shows firmware request (highlighted with red font), but I have already installed the firmware using YAST.
Ubuntu :: Mount FTP Directories To Local Fs - Curlftpfs?
Aug 28, 2010I'm looking for a way to mount remote ftp directories to local filesystem in order to interact with them as if were local resources. I found several tutorials that recommend curlftpfs, but this project seems no longer maintained (last update on sourceforge goes back to Apr 2007).
So, is curlftpfs still the best choice or is there something newer which I could rely on?
Ubuntu :: Installing Curlftpfs Get Glib Error?
Dec 2, 2010Im trying to install cUrlFtpFs. I get an error when run the configure file though, it says:************************************************** *checking for GLIB... configure: error: Package requirements (glib-2.0) were not met:No package 'glib-2.0' foundConsider adjusting the PKG_CONFIG_PATH environment variable if youinstalled software in a non-standard prefix.Alternatively, you may set the environment variables GLIB_CFLAGSand GLIB_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.***********************************************echo $PKG_CONFIG_PATHecho $GLIB_LIBSecho $GLIB_CFLAGS
View 1 Replies View RelatedServer :: Merak Mail Server All The Users Should Be Able To Get That Content Automatically In Their Outgoing Mails?
Feb 22, 2010I would like to set disclaimer like content in my meral mail server, so that all the users should be able to get that content automatically in their outgoing mails.
View 3 Replies View RelatedCentOS 5 Server :: Start Jboss And Tomcat Automatically, When I Do Reboot The Server?
Sep 9, 2009I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedGeneral :: Setup Server To Automatically Synchronize Its Server Clocks?
Oct 5, 2009How can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
View 2 Replies View RelatedUbuntu Networking :: How To Automatic Ppp Reconnect If Down
Mar 5, 2010I didn't find a solution to making my 3G/GPRS "modem" reconnect automatically when the connection fails, so I made a solution of my own. It's very annoying when you're downloading a file overnight, only to find that the connection has failed 5 min after you went to sleep.Restarting the NetworkManager daemon makes it automatically connect to all configured interfaces, including 3G/GPRS, so I made a simple script to do that.First, we check if the modem is even connected. Replace Huawei with the brand you're using. Any unique word on the line in lsusb will do fine as well. Then we check if the connection is up, and if it is, we simply exit. Otherwise, the NM daemon is restarted, which causes the 3g/gprs to reconnect.
View 2 Replies View RelatedUbuntu :: Using Reconnect Script With Jdownloader?
Jan 3, 2011EDIT: Question removed; I wrote a small howto below.
View 1 Replies View RelatedUbuntu Networking :: Rt2500pci Fails To Reconnect?
Jan 29, 2010wireless disconnects after a few hours, there is a 50/50 chance that the reconnect fails. if it fails i am asked for the wpa2 key, if i hit cancel and try to connect manually after 2 minutes it connects most times. if i enter the wpa2 key and hit connect i won't get any connection. reading the loglife of my router shows that my laptop connects and disconnects in a 7s rhythm. a restart solves this problem (is there a command to manually restart the network without the need to restart?
laptop: packard bell easynote w1000
ubuntu 9.10
lspci -v readout:
Code:
Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Subsystem: RaLink Device 2560
[Code]....
probably related, after suspend or hibernation networking is disabled, enabling it via right-click does not work again after a restart everything works how it should.
Ubuntu Networking :: Internet Shuts Off And Cannot Reconnect?
Sep 21, 2010I just started using Ubuntu at the advice of a friend. I am running it from a flash drive.I have a wired network that always works fine with Windows on this computer.After starting up Ubuntu it connected right up and I was able to use it. Then, out of the blue the machine shut off. Upon restart, I was unable to connect to the internet.I reinstalled Ubuntu to a different flash drive and it worked fine once again.I left the computer running while I went out for supper, returned and the computer was "asleep" and would not wake back up.I shut off the computer and restarted Ubuntu.No internet again. As always, it works fine in Windows.Also, BOTH times this has happened, the OS says I am connected to the internet, and I can turn the connection on and off, but it is not connected. This happens even if I reboot the computer. (I have a cable connection.)
View 2 Replies View RelatedUbuntu :: Removing KDE Secrets On Wifi Reconnect?
Nov 18, 2010I installed Kubuntu on my PC I want to use remotely, without having keyboard, mouse nor monitor connected to it. So I want it to reconnect automatically if it loses the connection.
I upgraded to newest version of kubuntu, so I have KDE4 and newest network manager app. I have password set to my KDE wallet, so I enter it on boot and the app connects.
But then if kubuntu loses connection and tries to recconect a window appears with "secrets", where I have network connection screen, the password for my wireless network is already in the necessary field and all I have to do is press OK.
Well, I don't want that window to appear. The app already remembers my password, it detects it has to reconnect, but it makes me confirm the password is correct? I want to make it just connect, without my input. But I have no idea where to look.
I've checked the options in network manager, but nothing on that. Then I don't want to change the app if I won't have to, linux tends to be pretty touchy with my network card and I'm afraid it could stop detecting it or something...
Edit: The window appeared again so now I can put full title of it: "Secrets for [NetworkName] - KDE Daemon". Under it I can choose security type for [NetworkName], there is field for password, with the password already inserted and "show password" field under it. Oh, and OK button.
Edit 2: Obviously KDE wallet has "always allow" option for KNetworkManager.
Ubuntu Networking :: Wireless Won't Reconnect After Dropping?
May 26, 2011I'm having a problem with the wireless on my Asus EEEPC 1000HE using Ubuntu 110.04. Digging into the laptop forums, it says there is a problem with wireless on some models of the 1000HE, but it is not the same wireless device and my wireless problem doesn't seem as bad as listed, so I think it's a different problem. But my problem is that if wireless drops for any reason, it will not start working again unless I either reboot the computer or click the wireless icon in the systray, click disconnect so it stops flashing (like it's trying to reconnect) and then suspend my computer or log off and back on. And it only does the latter because I added a file located at /etc/pm/config.d/00sleep_module with the one line that reads SUSPEND_MODULES="rt2800pci" (my wireless driver) So that one line seems to cause wireless to get a fresh connection after suspending (or something. I'm not a very advanced LInux user). I've tried running the command "sudo/etc/init.d/networking restart", but that does nothing for me. I'm not sure what other command to try to see if can fix it.[URL]
View 3 Replies View RelatedUbuntu Networking :: Can't Reconnect To Internet After Disconnecting
Aug 16, 2011Here is my problem:
I can reconnect to internet after disconnecting (this happens every 3-4 hours) only if I manually poke out and in ethernet cable to network adapter or reboot ubuntu. Even restarting network-manager not helps. My provider provides internet over pppoe. I have "DSL-connection 1" item in network managers gui menu. And that item disappears after disconnection.
pppd runs with following arguments: lcp-echo-failure 3 lcp-echo-interval 20 So where can I change this parameters, where is that configuration file?
OpenSUSE :: Samba Can Not Reconnect
Jul 23, 2011Having these issue with samba, after random time (it can be after 20 min or after 5-8min) my client mashine on windows 7 disconnects from opensuse 11.4 kde server. When i refresh disk on windows I am getting message that local device is already in use and that connection has not been restored.
I need to go to my suse and type service smb restart but these command usualy dont work I need to retype it for few times until windows can reconnect. it happen quite offen, hapend while wathing movie from shared disc...
Ubuntu Installation :: How To Reconnect To Home Folder Partition
Feb 24, 2010I did a fresh install of ubuntu 9.10 yesterday while trying to get my wireless working again (a problem for another forum). I have previously put my home folder on a separate partition.Having foolishly assumed that it would pick up the home folder as such after the install. Of course it didn't. The partition is still intact but it is not being recognised as the home folder.
View 6 Replies View RelatedUbuntu Networking :: 9.10 - Internet Connection Disconnects / Reconnect
Apr 18, 2010Recently I've installed Ubuntu 9.10. I have DSL connection so, I wrote all details needed. After trying to connect on it, it automatically disconnects and connect auth connection again. I have worked on 9.04 and older versions and used to work very good, also the internet connection, but not in 9.10.
View 5 Replies View RelatedUbuntu Networking :: WUSB100 V2 Adapter - Disconnects And Won't Reconnect
Nov 1, 2010Running Ubuntu 10.10, and I can't get my WUSB100 v2 Linksys adapter to work. I've tried what's in this thread: [URL] Entered lsmod |grep rt into Terminal and found out it runs on the rt2800 chipset, so I blacklisted everything necessary. It finds and connects to my network but after about 10 minutes it disconnects and won't reconnect.
View 6 Replies View RelatedNetworking :: Ubuntu Can't Reconnect To Gmail After ISP Restores Access / Fix It?
Dec 31, 2010Lately, my ISP has started making all Google sites inaccessible for a short time every afternoon (last 3-4 days now). I suspect some kind of DNS poisoning... access always comes back later in the afternoon.
When access does come back, non-Linux machines can connect basically right away, but my Ubuntu machine (the primary one I use) seems to need a reboot, as if wrong DNS information gets stuck in the session and the reboot clears it so that the machine can get the correct IP address.
I have not installed nscd, and IIUC the OS should not be persisting DNS cache information without that package. Every reference I can find online to clearing the DNS cache seems to depend on this package.
The objective is just to get back in touch with my Gmail without having to reboot (since e.g. OSX doesn't require a reboot for the same). What should I do?
Ubuntu Networking :: Wireless Loses Connection Then Will Not Reconnect?
Mar 24, 2011I am fairly new to linux. I have Ubuntu 10.10 on my Dell Inspiron E1705. While browsing my internet connection suddenly stops working. It says that I am still connected but the internet doesn't work. When I try to disconnect then reconnect it will not connect to the network. To get it to reconnect i have to turn of the wireless card, delete the connection then restart, turn the card back on and reconnect.
View 9 Replies View RelatedUbuntu Networking :: 10.10 - Wireless Asks For Password But Cannot Reconnect
Apr 21, 2011Running 10.10 on Hp dv2000. Approx once a day wireless asks for password authentication but cannot re-connect to wireless network. I verified connection, correct password and modem & router functionality but still will not re-connect. After re-boot problem is resolved for another day or two.
View 5 Replies View RelatedDebian :: Bluetooth Keyboard Reconnect
Jun 1, 2015On my Raspberry (I know but I could not get any response in raspberry-forums) running raspian I have a problem with a bluetooth-keyboard.
It has bluez 4.99-2 installed and I was able to pair the keyboard and make it trusted and when I run "bluez-test-input connect <address>" I can use it as an input device, but the problem is that when the keyboard goes into a standby-mode after some inactivity the connection is lost and not reestablished. To make it work again I have to run the bluez-test-input command again.
Now when I use the keyboard on my Android-device it also goes into standby but as soon as I start to type again it automatically reestablishes the connection - this is what I would like to achieve on the Rasperry.
My fundamental problem is that I don't know anything about bluetooth really...
I assume that on Android the keyboard initiates a connection when it comes back from sleep but on Raspbian the connection is initiated from the Pi and when the connection is lost the keyboard may try to reconnect but maybe there is no "bluetooth-server" on the Pi to accept the connection but that is just guesswork from someone that really has no clue...
Debian Configuration :: Wireless Does Not Reconnect
Oct 26, 2015I have done a clean install of debian 8.2 (jessie) on a new PC. I am working through some of the issues that were not correctly installed. One of them is the wireless network. On startup, I have a wireless connection. At some point within the first 5-25 minutes of being logged in and doing computer stuff (there is no known action that leads to the reaction), the wireless disconnects from the network and will not reconnect. The network-manager-gnome shows three horizontal dots; the system settings> network shows all of the available networks, the strength of their signal, and the "connecting" circle spins. This behavior occurs with both WPA and insecure networks.
I have followed the guidelines for Debian>WiFi>HowToUse (https://wiki.debian.org/WiFi/HowToUse). Nothing appears amiss when following the Network-Manager>Gnome portion of the instructions. I was going to try the alternate WICD program, but one has to uninstall network-manager to use wicd and synaptic also wants to remove something called "gnome", too-- uninstalling a package with that name makes me uneasy. I have noticed that the installed versions of network-manager (0.9.10.0-7) and network-manager-gnome (0.9.10.0-2) don't exactly agree, but I doubt that that is significant.
root@fayalite:/home/agnewton# iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"Mineralogy"
Mode:Managed Frequency:2.472 GHz Access Point: 64:E5:99:2C:A0:7E
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-18 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
[CODE]..
Networking :: How To Make Ppp Reconnect On Disconnect
Nov 27, 2010i use ppp to connect to a VPN, and i need it to auto reconnect when i looses connection. How do i make it work?I use Debian.
options.pptp settings:
lock
noauth
[code]....
Ubuntu :: Jdownloader - Cablemodem - NO Router - Visudo - Reconnect Config ?
Feb 13, 2010I Love Jdownloader program but can't solve this old problem.
I'm still a little retard with GNU/Linux
Able to do a reconnect by running the following commands
Quote:
This is the script I'm using.
Quote:
It resembles this one in Window$
The program dhcpcd requires root user privileges.
Avahi daemon and network-manager widget should be disabled or uninstalled for this to work on Ubuntu.
Also I'm using Karmic.
I'm not Cisco certified. What I think it does, in a non technical comparison, is tell the ISP hardware that your ip should be 190.189.48.52 or whatever number you like.
For the ISP this would be the last lease you used.
The ISP hardware does not recognize this last lease in its list, so it assigns a new ip.
That does the trick and you get your new ip!
My ISP promotes the service with dynamic ip so no legal matters here.
The problem is how to automatize it.
Sudo runs the script with no privileges problems.
I am able to run it password-less by modifying sudoers file via visudo command.
I add the following line
Quote:
It can also be like (this would need extra security measures?)
Quote:
Then you can run sudo /usr/bin/cambiar-ip and it won't prompt you for a password.
Password issues solved, I cannot get Jdownloader to run it.
In the Settings > Reconnection tab
Tried to use "External" and "Batch" but i get reconnection failed sad face.
I've tried in "External" /usr/bin/sudo /usr/bin/cambiar-ip
It won't work.
I'm missing something of the Unix security structure.
Here is the wiki of the program
[url]
Ubuntu :: Wireless Randomly Drops Connection And Refuses To Reconnect?
Mar 23, 2010my wireless will connect to a well known connection but will sometimes drop the connection then tries to reconnect. Sometimes it will reconnect w/o a problem but most times it will fail and when it fails it will refuse to even recognize that same wireless connection.
If by a small chance it does recognize the network then when you click on it, it will ask you again for the password, which is already saved onto the computer. After entering the password it will try to reconnect, then fail.
Only solution is to reboot.
I was wondering if there was an easy temporary fix of just reloading the software that controls the wireless.Such as, my audio doesn't work when I boot. I need to reload the ALSA driver using sudo /sbin/alsa force-reload
Is there something specific to the wireless that I can force-reload and it will start working w/o having me reboot my PC?
Ubuntu Networking :: Have To Restart To Reconnect Because It Shows No Networks In Manager
Nov 20, 2010So i installed ubuntu 10.04 on my Hp dv9000 and all went well, then a few days after it asked if i wanted to update to 10.10 so i did and this is where things went kookie.
After i installed i noticed my wifi was all screwy. It would connect but kick me off after several mins of use. I installed WICD hoping that would fix the problem but it didnt. internet work for a few min and then just suddenly cuts out and i have to restart to reconnect because it shows no networks in the manager?
