I am running fedora 10 and webmin squid proxy server, after power failure the squid fails to start. i have tried to start it from command line but failed
[root@ ~]# /etc/init.d/squid start
Starting squid: .................... [FAILED]
[root@ ~]# /etc/init.d/squid reload
[code]....
Ejabberd fails to start in f-12. ejabberd-2.0.5-9.fc12.i686. This ran fine in f-10 and f-11. Getting a large number of strange error messages from the ejabberd log code...
Looks like it may be a permissions problem.
Anybody from the ejabberd community here that has gotten ejabberd to work on f-12?
I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
Ubuntu Server 8.04. I have 2 servers in the same rack, on the same subnet, using the same DNS servers and build with the same media. On one of them the following command fails
Code:
apt-get install squid
On the other on the package was installed with out any problems. I have checked the /etc/apt/sources.list files and they are identical. Actually, it could not find mutt either.
I am on Ubuntu 10.04, running Squid 2.7.STABLE7 Squid refuses to start on my machine unless I give it the -D argument (disable initial DNS tests). I think this is because my machine is offline while I'm testing it, so no DNS server. how to set Upstart to start Squid with the -D argument?
View 2 Replies View RelatedHow to resolve this apache2 problem I keep getting, I have installed a debian LAMP server with ispconfig3 and everytime I reboot apache fails to start, I don't know and I have done some research but nothing seems to work, which leads me to reinstall everything from scratch again, I think I have reinstalled at least 10x or more.
When ever I reboot I get the following error
Code:
I've just upgraded to 9.10, and mysql fails to start. When I do an /etc/init.d/mysql start, I just get
* Starting MySQL database server mysqld ...fail!with no additional errors or information to say what went wrong. I saw this thread http://ubuntuforums.org/showthread.php?t=1322070 but the fix mentioned does not apply, as I don't have the #skip bsd line in my config file.
My ubuntu server was working normally but it suddenly failed to start, stopping after the following message: init: ureadahead-other main process (587) terminated with status 4 after this message, the system halts and does not finish the start up processes.
If I start the server in recovery mode, I get: init: ureadahead-other main process (587) terminated with status 4 [ 21.892940] ACPI: I/O resource w83627hf [0x295-0x296] conflicts with ACPI region HWMI [0x295-0x296] the system also halts and does not start. Right now, I can not use the server at all.
Squid gives the follwoing error messages when i attepmt to start it:Sep 10 12:33:24 localhost (squid): Cannot open '/var/log/squid/access.log' for writing. The parent directory must be writeable by the user 'squid', which is the cache_effective_user set in squid.conf.Sep 10 12:33:24 localhost squid[3423]: Squid Parent: child process 3446 started
View 3 Replies View RelatedI have squid running on F12 fully updated. Pretty much stock config except bigger cache size.
Over time it seems to start lagging and occupying more memory. Currently using ~400Mb after a couple of months. I'm sure its causing some lag / refreshes because if I turn if off and go direct to internet the same site I had to hit refresh on, loads instantly.
Going through the logs in /var/log/squid I don't see anything suspicious with the untrained eye, whats a better way of debugging it to see where/why the delays are happening? Its a single user setup (for fun really lol) so theres a lot of misses in access.log. cache.log just has a handful of bad img headers which does not line up with lagging websites.code...
I have 4 servers running squid/3.1.1 proxy server. Since the latest version I can no longer FTP. I have posted this problem in multiple places but have received almost no response. I've found several other post to this problem throughout the Internet which have also gone unanswered. So, once again, I thought I'd give it a try. As I said "I have 4 servers running the newest version of Squid". When I try to access an ftp, any ftp, I receive an error (check attached image). This was never a problem until just recently. Squid should work perfectly find with ftp, it is not a strictly http proxy.
I turned my firewall off just to make sure, still had the same issue. If I jump directly on the server itself with no proxy settings set in the browser it will work fine. As soon as I set the browser setting to access the Squid software I get the same error. I've included my squid config (which is unchanged from the default settings), maybe somebody better versed than myself can point out an obvious flaw. Everything else seem to work just fine, it's only FTP that's a problem.
I have a reverse proxy set up with squid. I'm going to try and explain what it's doing and I apologize for it being confusing, I'll do the best I can to describe my problem. First, it's for our phone system. We run a ShoreTel Voip system. The owner has decided he wants me to setup MCM (Mobile Call Manager), which from what I can see is an under developed, and almost impossible to get help with Shoretel software. But he's convinced he needs it for his Iphone. It's supposed to, in a nutshell, turn his Iphone into his work phone with all the advantages and doodads that come with it. Apparently, "they have an app for that". On the server side, I need to setup a reverse proxy back into the network on our phone server. Simple enough, I did this with squid. I used the following lines:
Code:
http_port 80 accel defaultsite=172.17.137.7
cache_peer http://172.17.137.7 parent 80 0 no-query originserver name=myAccel
acl our_sites dstdomain http://172.17.137.7
[code]....
Code:
always_direct allow all It most definitely is allowing traffic back to the phone server, the problem is, it hands out my internal server address to the outside client. So for instance, if I connect to the outside routable address with my phone, it will immediately change the url to http://172.17.137.7 which is the inside nat address of my phone server. Which of course doesn't work, since I couldn't browse to that address from the outside. It does however work from the inside of the network, obviously because 172.17.137.7 is accessible from the inside.
I want to configure squid server with SSL so that users send clear text username/password and also data in encrypted mode. i googled but all of the configuration is for reverse proxy not requests from users to proxy server in LAN for example.
View 5 Replies View RelatedI need the complete reference guide to set up my own SQUID transparent proxy Server with Gateway support. I am using Fedora 14. Please help me with LINKS/REFERENCE. I am a learner in Squid.
View 1 Replies View Relatedi have been trying to set zoneminder on fedora 12, after all setup. i see black screen on monitor. pasting the error below.
[Tue Dec 29 23:28:40 2009] [error] [client 117.192.6.17] PHP Deprecated: Function ereg() is deprecated in /usr/share/zoneminder/www/includes/functions.php on line 808, referer: http://192.168.2.2:8080/zm/
[Tue Dec 29 23:28:40 2009] [error] [client 117.192.6.17] PHP Deprecated: Function
[Code]....
I am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View RelatedI installed dhcpd using:
Code:
Now when I try to run it, I get this weird error:
Code:
The error was:
I changed permissions to 777:
Code:
To no avail!
It's got something to do with AppArmor.
I don't think it is installed on this system:
Code:
on the risk of starting another OO thread I would like to share my problem to resolve it... (found this 'challenge' nowhere on the forum) installed openoffice apps on my F11 64-bit box through add/remove software until some time ago everything worked well for all users now with one specific user OO hangs upon startup when opening a file (only displaying splash screen, nothing further). this user is nowhere blocked intentionally
to resolve I did:tried other users, all works well (starting from menu, opening files in Nautilus by double-click) renamed ~/.openoffice.org to ~/.openoffice.org.bak so new prefs are created, but new attempt results the same (freeze upon start) copied ~/.openoffice.org from well-run user, but new attempt results the same (freeze upon start)
installed gnumeric as an alternative but I like to bring this to a happy ending.giving enough eyeballs the solution must be out here somewhere
I updated Fedora 12 a couple of weeks ago, and Amarok stopped working. The splash screen came up, and hung there until clicked on. Looking at the process, it uses 49-50% CPU (weird since it's on an Acer One netbook with an Atom N270 single core processor) and the memory footprint steadily increases. I hung on for another update to see if that fixed it, but one came through today with an update to Amarok, but it is still broken.
View 2 Replies View RelatedI'm using Fedora 14 / KDE and I'm having problems trying to start the Speech Dispatcher.I get the fallowing from the logs:Code:error while loading shared libraries: libsdaudio.so.2: cannot open shared object file: No such file or directory
View 1 Replies View RelatedI recently changed my system from Ubuntu/Suse to Fedora14. Starting Ardour2 or Ardour3 (both build from SVN) or Ardour from the Repo-Package I get this:
[code]...
Ardours Dev Paul Davis thinks, this is an issue with libxml2 but upgrading libxml2 and even downgrading it did not work either. With the fresh install of Fed14 2 weeks ago the Package from the repo did work very much OK. is there anything I can do?
I recently upgraded to Fedora 14, and was surprised to find that OpenOffice is not included in the distro like it was in previous versions. Anyways after installing it it was working until while ago when I downloaded the recommended updates, and now when I try to start it, nothing happens.
View 2 Replies View RelatedI have been using F13 Gnome desktop for a few mouths now but for some reason it won't start X anymore. I get this:
[Code]....
giving up. xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error. Don't knoiw what has changed? But I would like to get it fixed. I have installed F13 on another partition and it works OK.
Previously mysql was fine under FC14. Upgraded to FC15 64bit
System:
IntelPentium(R) Dual CPU T3400 @ 2.16GHz 2
uname -r -v
2.6.38.8-35.fc15.x86_64 #1 SMP Wed Jul 6 13:58:54 UTC 2011
Mysql would not start when I tried to use it. Failed with
Quote:
service mysqld start
Starting mysqld (via systemctl): Job failed. See system logs and 'systemctl status' for details.
Problem was these two lines in my /etc/my.cnf
Quote:
#default-character-set=utf8
#default-collation=utf8_general_ci
As you can see these are now commented out.
Result
Quote:
[root@centos etc]# service mysqld start
Starting mysqld (via systemctl): [ OK ]
or how to relate that I want them to be utf8 in the conf file,
I have configured router(192.168.1.2) to serve only one machine with IP - '192.168.1.6' and set up SQUID proxy on '192.168.1.6'. I have defined some rules(ACL) regarding connections to internet on SQUID proxy.
I changed the Gateway of rest of machine (192.168.1.60 - 192.168.1.69) from '192.168.1.2' to '192.168.1.6'.
The policies which I defined in SQUID is working properly but 'Linux Evolution mail' client is not fetching mails.
Is I have to do any other settings on 'Linux System' or 'Evolution mail client'.
I just updated my Fedora 10 installation with the latest NetworkManager (NetworkManager-0.7.0.99-4.git20090324.fc10.i386) and now my NetworkManager fails to start. The output in the /var/log/messages is
[code]...
I have fedora 10 installed and when my monitor is turned off the X session fails to start because it can not probe for settings. Is there a way to hard code the settings for x instead of letting them assign dynamically on boot?
View 1 Replies View RelatedI recently made a custom spin of fedora on 29th August 2009. It initially failed to go past the slash screen but a solution was found here on fedora forum. It included adding the following to kernel line in grub.
enforcing=0
I later checked SElinux and found the option to do a filesystem relabel at next boot was enabled. I rebooted the system without adding the above words "enforcing=o" and it got stuck after the the splash screen (the blue screen with a fedora bubble). I then did some more research on SElinux and filesystem relabelling. There were several comments that said that a notice is given in the event of a filesystem relabel. I went to the konsole and as root I wrote the following commands:
touch /.autorelabel
reboot
I gave my pc 20Hrs 48min and nothing happened. My HDD is 80GB but it only had 7.5GB of data. There were no messages that indicated that the filesystem relabel was in progress or even if it had started. I also tried the following command but failed:
make relabel
I have now had to edit grub.conf and added the words "enforcing=0" as it is the only way the system will go passed the splash screen.
Arpwatch is failing to start at boot time. I got this message:
arpwatch: bad interface eth0: eth0: no ipv4 address assigned
Once I login into my account, I can (as root) run the arpwatch demon, but it is suppose to run at boot time. After I installed aprwatch, it was working correctly. I do not have an idea of what happens or since when the problem start to happen. I just realize, after a while , that arpwatch was not running. I am running Fedora 12 - 2.6.32.9-67.fc12
After the 4th install The printer will at least produce a test page, but the available resolution is low, I suspect I need the gutenprint enhanced drivers, printer is a EPSON R285. Where do I find the nvidia libs so I can use the Nvidia driver for my ancient 8500 GTX. Using the package manager find nvidia shows nothing.
Are these libs held on another repo, as in other distros?, and is Acroread availble? is there a listing if the repos somewhere, I have some apps that have to be compiled and are a pig to get going, due to using those funny cut down libs that ubuntu use. When I backed up the last failing version of FC13, which hung as soon as yum was started, didn't print ect, I didn't close firefox down before copying the file. So the user config is locked, ie, you get firefox is already running, and fails to start. I found parentlock and deleted it, but but there is another lock file that needs to be removed, and I can't find it.. Anyone know the location of the lockfiles for firefox.?