I'm looking to install an nVIDIA driver (sh NVIDIA-Linux-x86_64-190.53-pkg2.run is the command I used) but it tells me I need to do it when the xfree isn't running
So what I'm looking for is a way to boot up to the command line, is that possible on SUSE 11.2?
I have installed SystemD in in parallel to SysVInti(with OpenSUSE enhancements). When I starting SystemD, startpar is also running. I suppose, i should add starpar.unit to SystemD configuration. I asks for help, because I won't broke my system.
View 2 Replies View RelatedFor a number of openSUSE releases now, on a periodic basis (monthly, it seems?) both my laptop and my desktop take forever to start. During this time, the hard disk activity is going berserk. When inspecting this with "iotop", a process called "preload" or "start_preload" is hammering the disk, sometimes up to 10 minutes.
The irony is when you research "preload", you find mostly articles like "drastically speed up your Linux system with preload"- I sometimes think it has to do with running VMs on these machines and maybe it's trying to cache those large disk images? Pure speculation, but I can't seem to find any documentation on this.
Anyway, I did finally find a way to turn this thing off. WARNING: since I do not know exactly what preload does and whether your machine becomes unusable if you turn it off, please only follow these instructions at your own risk. Since preload seems to be a very low-level system/service, I did not want to risk uninstalling it. What I did instead was:
Yast2 - System Services (RunLevel)
Click the Expert Mode radio button
Scroll down to the boot.startpreload entry
[code].....
Since I applied these steps, no long boot times with insane hard disk activity has occurred and I also have not noticed anything else complaining or not working with this service off.
I have been trying to compile a package and I am having some difficulties linking to libX11.so. It seems that it reports that XFree is undefined. Is there some work around for this?
View 4 Replies View RelatedFirst some specs:
Fedora 13 (Goddard) 32-bit
NVIDIA GeForce GTX 260
The DVI output on my card works just fine to my monitor, which is what I've been using. I installed no drivers; it just worked. However, now I need a duplicate screen to be given via the s-video output, but it doesn't work. Nothing is being given to the tv and nothing is being detected under monitors. From what I understand, this is because I need to install the appropriate Driver.
I downloaded my driver from the nvidia website, but it won't install. it tells me I need to disable nouveau.
I just installed ndiswrapper so I wouldn't have to deal with it. Thing is, I'm not fairly certain my driver is one of the ones ubunutu comes with. I removed ndiswrapper (from the add/remove section, not sure if thats a full uninstall or if I should of used terminal), but my driver is still listed as "ndiswrapper". How do I completely remove that, so my system can use default drivers?
View 1 Replies View Relatedi know if u search a solution in forums u get so much confused information. i hope this little manual will help all with the nvidia driver problem! u dont need to edit or create a xorg.conf or something to run the driver correct and u need no blacklistedit too! if u did the standard opensuse 11.3 install its only about 2 kernel packages and the disabling of the x11noveau driver.
1. after standard installing opensuse 11.3 update and install the opensuse softwareupdates
2. install with the yast software re/installer:
(from Desktop or from the terminal. the terminal text command is: yast2)
[Code]...
u dont need to change the menu.lst after all, only u get many problems. run the midnight commander and delete the nomodeset word and the noveau driver would be normally still active after reboot.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
For those who need or want to install the latest ATI proprietary driver (Catalyst 11.2) right after a fresh 11.4 install - and might not look for solutions in the development subforum.In order to compile the module, I installed the kernel sources and the pattern devel_basis. I normally use most packages in this pattern, so I install it by default from other scripts. While running atiupgrade on a fresh install, I was surprised by the number of packages getting installed with that pattern.Please report if it doesn't work. (like aticonfig initial failed to add a fglrx section for some reason).Take a look at the atiupgrade thread in the development forum: Upgrading ATI driver with atiupgrade.
View 9 Replies View RelatedSo ... right now I'm having an issue after I installed ATI Catalyst 10.8 for my GPU HD 5770.Every time I try to boot, it sends me to init3 (I mean text screen). But when I check and try to switch to init5, it tells me that I'm on init5 already.And I'm still stuck on the text screen. However, safemode is still working (yeah I'm on it right now - -").
I installed ATI driver by using this instuction --- openSUSE Lizards � ATI HD57xxx fglrx drivers under 11.3
I can disable the internet in mswin(XP) to gain some FPS in games. How can I disable the internet and enable the internet as needed? I have suse 11.4 and kde. Through command line?
View 9 Replies View RelatedI have a qzd netbook with opensuse 11.2 running but I cannot get the graphics working. I have tried "startx" and get the following:
xauth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]...
I've had a graphical card and I've downloaded the driver (from the official website of NVIDIA) with extension .run. As I forget the command line to install it, I would like to ask about it.
View 3 Replies View RelatedNvidia h/w:Quadro FX 570
Installed 11.4 yesterday. No problems. Installed Gnome 3 today and it goes into fallback mode. Assuming that the graphics driver might be the culprit, I attempted to install the latest nvidia driver.
Added repo ftp://download.nvidia.com/opensuse/11.4/ in Yast2.
Did a refresh and it complains that it cannot access installation media at the above. Paste the above in Firefox and it gets there OK.
One-click method also fails.
Never had a problem with updating nvidia driver before. Not sure what to check. I did delete and add with no success.
BTW, the other defined repos in Yast2 work fine.
I wanna disable the vertical scroll of the track on my aspire one,... Before I did this with Sax2, but now, there is no sax, so??
View 1 Replies View RelatedI've set up a media box for mythtv based on OpenSUSE 11.3 and LXDE. By default, the screen gets locked prior to a suspend. On resume, therefore, the screen is locked and requires a password to unlock. I need to disable this action. In KDE4, I can do that by going to the power management settings and un-selecting the appropriate check box. In LXDE, however, I can find no such settings. There must be a config file somewhere that I can tweak to turn off the screen lock prior to suspend, but I have no idea what it is.
View 5 Replies View RelatedI've had a hell of a time with this and now all but YAST2 are ok. Going back some time to 10.0 this could be used to disable it very completely.
open terminal and run
echo "alias net-pf-10 off" >> /etc/modprobe.conf
echo "alias ipv6 off" >> /etc/modprobe.conf
restart computer. Has anyone used this on more recent issues even 11.4 and are there any repercussions?I assume that the inverse will but it back on ie off's just become on's? I will be using cups when I install my printer which is one concern and I am not at all sure that modprobe will do anything anymore?
I also recollect that there is a command to cause the kernel to effectively reboot which would save restarting. Can't remember what it is. Maybe some one can refresh my memory.
For reasons long and unique, I want to disable UUID in my recent Ubuntu 10.4 install, and use the old fashioned /dev/sda1 /dev/sdb3 etc. method. I had this "all fixed" under GRUB (pre-2) on Ubuntu 8.04 and it has served well and bug free for years. (Warning: I use old stable hardware - others may have disasters.) But with GRUB2, the task seems more complicated. (This guide me make the backups I haven't done since the fresh install 2 weeks ago.)
Is the following process complete, necessary, and accurate...
Edit the file /etc/default/grub to remove the # in the line...
#GRUB_DISABLE_LINUX_UUID="true"
... making sure to add the two " if missing .....
Copy nearly the entire /boot/grub/grub.cfg file
into /etc/grub.d/40_custom and then...
Comment out every line that says...
search --no-floppy --fs-uuid --set (etc.)
Change every line that says...
linux /boot/vmlinuz-2.x.yy-zz-generic root=UUID=(etc.) into...
linux /boot/vmlinuz-2.x.yy-zz-generic root=/dev/sda1
Edit /etc/fstab and change every instance of UUID=(etc.)
to the appropriate drive and partition e.g. /dev/sda1
edit /etc/initramfs-tools/conf.d/resume and change RESUME=UUID=(etc.)
into RESUME=/dev/sda1
Run update-grub
Do all the above, every time I do a kernel upgrade. (Is it important to do all the above before or after rebooting for an upgrade?) Am I correct, succinct, and complete in the above process? Any mistakes? Any omissions?
iam trying to install the ATI Driver at 11.2.After install an reboot 11.2 doesn`t start again,the screen goes black or commandlines shown. My Graphigcard is ATI(Sapphire X1650 Series)512MB Cardspace AGP.
Who can help me with this problem. Is 1 click install ok,try it and than problems.
I have tried install drivers of Ati ,9.10 and 9.11 always same result black screen, i think problem is information on installation system is on glibc 2.1 but, I have tested and glibc 2.3 and 2.2 are installed, for that the result is :
Unloading radeon module...
Unloading drm module...
[Message] Kernel Module : Trying to install a precompiled kernel module.
[code]....
after installing 11.4 I can no longer boot into KDE using the ATI driver from their website. Same thing happened prior to 11.4 but I assumed it was an out of date driver so I updated SUSE + the driver, no difference. Boots straight to command line. I was getting errors about the Xorg.conf.old file unable to be overwritten when I tried 'Xorg -configure'. I did find a few solutions from other threads and simply deleting Xorg.conf allows me to boot into KDE using the default (whatever that is) graphics driver (fps is very low but it boots at least).
Any time I reinstalled the ATI driver/tried to use it it would die again. After a bit of searching around the log files for Xorg and X11 I found an error about "display not found" or something of that nature and then it was giving up and booting to cmd. had it working fine in the past prior to a software update (either driver or kernel or both, I don't remember) so I'm not entirely sure what broke it. I can give more specific error details once I get home in an hour or two but I'm just wondering if the latest ATI driver (11.2? I think it is) is compatible with openSUSE 11.4 and if anyone has a solution to this problem.
Since I have upgraded to KDE 4.5 I can't play games (native or wine) without disabling composite before start playing.When I start a game its window begins to shiver (to tremble or to shake... not sure) and so I have to disable composite first and then relaunch the game.I never had to do this in KDE 4.4.
View 2 Replies View RelatedI did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin)
Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
I have unfortunately found myself unable to properly boot up openSUSE because I decided to buy the Acer Aspire with the i5 Processor.
I have the Intel Graphics Media Accelerator HD (GMA HD) graphics card, and unfortunately from all my searching online and on openSUSE, I have been unable to find a driver for this that works for linux, and in addition I don't know how to install a driver outside of a GUI.
My openSUSE boots up to the boot choosing screen (regular openSUSE or failsafe), and then that nice list of functions being done is displayed, but as soon as the daemon has started, suddenly my screen goes blank and I am unable to do anything about it. Beyond this point, my OS loses all functionability, and while I can hear it computing, I am unable to actually tell WHAT it is computing. get a driver for this and to install this driver and get this GUI running, that would be great.
how can I check if my graphics card's driver is installed. And if not, how can I install it and where can I download it?
View 3 Replies View RelatedI've been running OpenSuSE 11.2 for some time now; my system is a Dell 64-bit with an ATI 46xx graphics card and I've used the proprietary ATI driver without difficulty, as the driver provided with OpenSuSE was pretty much unusable. I'm considering upgrading to v11.3, but there seem to be scattered horror stories involving ATI cards, particularly when it comes to ATI's proprietary driver.
View 9 Replies View RelatedI installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.
HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m
Main desktop upgrade no problem. Laptop upgrade no problem. With my Media machine I had a problem the the ATI build-in graphics hardware. During install it did not ask to remove the ATI driver. no graphical UI. Since all the data where backed up anyway and the original install lacked some partitioning, I did a fresh install. Had some problems with sound, which I could fix via the KDE multimedia "phonon".
View 1 Replies View RelatedI installed Suse 11.4 and have a couple of questions.
I installed the newest Nvidea driver for linux but when I look under system info it sais 3D driver: swrast (No 3D Acceleration) (7.10)) How can I turn this on?
Also under CPU info the speed switches between 800MHz, 1400MHz and the normal 2.6Ghz (x4 for the Quad Core). Is something wrong or does it shows how much the system is using current?
Lastly my pc shows the following:
OS: Linux 2.6.37.1-1.2-desktop x86_64, Current user: robertjan@linux-18xg, System: openSUSE 11.4 (x86_64), KDE: 4.6.00 (4.6.0) "release 6"
Since I see x86_64 how do I know if I installed the x64 version which I downloaded?
I am following the how to at ATI drivers - openSUSE and I am getting an error. I installed the opensuse 11.2 x64bit version and I have a Radeon x600 video card. When trying to install the propietary driver (which I guess I need to enable 3d HCL/ATI Video Cards - openSUSE) I get the following error:
administrator@linux-fsvg:~> su
Password:
linux-fsvg:/home/administrator # zypper in kernel-source linux-kernel-headers kernel-syms module-init-tools
[code]....