OpenSUSE Wireless :: Install Two Wireless Devices Under 11.3?
Jul 14, 2010
I have an Intel PRO/Wireless 3945ABG built in on my laptop, and this has always been (relatively) simple to get running on both 11.1 and 11.2. When I install 11.3 I will also be installing an RT2870-based USB device (Jensen Airlink85300 LongRange Extreme-N 802.11b/g/n)
I must have wireless enabled under install to get the Intel recognized, but should I also have the RT2870 plugged in and ready to go? Or would it be best to wait until everything else is up and running?
View 2 Replies
ADVERTISEMENT
Dec 7, 2010
For those of you that prefer open-source solutions, the b43 code to drive BCM432X 802.11n devices has just come to life. It can now scan and associate. Tests for throughput will come soon. These revisions to the driver will be in kernel 2.6.38, thus not in openSUSE until the next release after 11.4.
View 1 Replies
View Related
Aug 30, 2010
I have finally gotten permission from Realtek to submit the new driver to the staging directory of the mainline kernel. This also means that I can allow users to download from the git source repository so that they can build their own versions. If you are interested in doing this, you will need to install some packages. To get the ones you need
[Code]....
View 9 Replies
View Related
Oct 24, 2009
in openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 9 Replies
View Related
Aug 17, 2010
In openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 5 Replies
View Related
Aug 17, 2010
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies
View Related
Jul 3, 2011
Wireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
View 1 Replies
View Related
Aug 10, 2010
I just installed the latest openSUSE on my laptop. I actually had wireless working. Then it stopped. Wireless is fine on my desktop computer. When I take the cable from my router and plug it into the laptop then I have internet
View 9 Replies
View Related
Nov 12, 2010
According to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies
View Related
Apr 27, 2009
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
View 9 Replies
View Related
Jun 13, 2011
When I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies
View Related
Apr 30, 2010
I don't know how install my wireless card.in Yast, i see it, but I can not configure it... I configure with ndiswrapper, but it's not work.
View 5 Replies
View Related
Aug 12, 2010
I just upgraded from 11.2 and it seems 11.3 dosent detect my wireless adapter or ask for a driver update. I have a acer laptop but am not sure what brand the adapter is..
View 1 Replies
View Related
Apr 1, 2010
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies
View Related
Aug 25, 2010
I have a broadcom wireless card in my laptop and as far as I know, it acts as an USB device. I also have one USB stick wireless device (TL-WN422G - uses ath9k_htc driver) which I want to use at the same time as the first (Broadcom) device.
The problem is, after I load ath9k_htc - iwconfig does not show the new USB device (the TL-WN422G - wlan1 / ath0 / whatever), but only the old one (wlan0 - Broadcom, checked by MAC).
I tried this USB device (TL-WN422G) on my other computer that has PCI wireless card in it, and they both worked just fine together after I pluged it in... I get wlan0 (Ralink) and wlan1 (TL-WN422G). Is it some kind of a problem for the laptop that both devices are recognized as USB? How do I make wlan1 appear on my laptop?
also, my system is fully up to date 2.6.35 kernel (Arch)
edit: I've already downloaded the needed ar9271.fw from linuxwireless.org and I put it into /lib/firmware - something wrong in that?
dmesg gives me this on laptop:
usb 1-5: new high speed USB device using ehci_hcd and address 9
usb 1-5: ath9k_htc: Firmware - ar9271.fw not found
ath9k_hif_usb: probe of 1-5:1.0 failed with error -22
[Code].....
View 1 Replies
View Related
Jul 17, 2010
Want to eventually make the switch over but figure taking it slow and learning on an old laptop would be best.
I went through the installer and everything looks great so far except I can't for the life of me seem to be able to get the wireless working. I tried everything a windows newb like me could think of ... it looks like to me the wireless card is not being used since it can't detect anything? I read some threads and here are the results of common terminal stuff that most people say to do:
/sbin/lspci
Code:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 02)
02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
code....
View 9 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Apr 17, 2010
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
View 2 Replies
View Related
Aug 5, 2010
I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies
View Related
Aug 12, 2010
I have a Acer Revo R3610 nettop on which I installed oS11.3. It has an Atheros AR5001 wireless network adaptor.I'm getting very bad latency and throughput on with this card. In comparison my Thinkpad with Intel card achieves at least 10 times the throughput from the same location. Also when I boot my wifi will come up authenticate and then a few seconds later disconnect and reconnect. I've tried updating the kernel to 2.6.35 as one of the fixes was to improve the performance of the ath5k driver. I'm using wpa2 authentication.
Here are some details:
Code:
mediacentre:~ # /sbin/lspci -nnk
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: Acer Incorporated [ALI] Device [1025:0222]
[code]....
Is there anything else I paste that will help determine the cause of the bad throughput. Browsing the web or copying files across the network is bordering unusable.
View 9 Replies
View Related
Feb 12, 2011
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
View 6 Replies
View Related
Mar 14, 2011
I had the Wireless Broadband working. It stopped working after I closed the laptop (suspend). Also the wifi will not connect until reboot. Now the entry for the Wireless Broadband is gone, and the tab for it is greyed out as well.I would be happy to submit this as a bug and assist with the debugging process.
View 2 Replies
View Related
Mar 29, 2010
I got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
View 9 Replies
View Related
Apr 13, 2010
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies
View Related
Sep 30, 2010
I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
View 5 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Nov 3, 2010
i'm running 11.3 kde 4.4, with a Broadcom 4318. since installing 11.3 a few days ago, whenever i'm connected via wireless, one of two things always happen: when trying to play video (hulu, ....., etc.) in firefox, within a minute or so i will get the BSOD--that is, my screen will go black, and my cap/num lock lights will flash on and off. also, when regularly browsing the internet...not long after opening firefox, it will stop working like i have no connection, and then i will get a frozen screen and system within a minute or two after seeing a variation of this communication message:
"Message from syslogd@sbkra at Nov 2 21:09:53 kernel: [956.784417] process irq/11-b43 (pid: 1974, ti=debee000 task=dd291170 task.ti=debee000 Message from syslogd@sbkra at Nov 2 21:09:53 kernel: [956.784424] Stack: Message from syslog@sbkra at Nov 2 21:09:53 kernel: [956.784458] Call Trace: "a couple times, i've gotten this message and the following freeze when running video in firefox.
strangely, i have no problems running streaming audio through smplayer. and i have no problems playing saved video files through smplayer. and i have absolutely no problems whatsoever browsing or playing online video while connected via ethernet.
i've also searched through the various forum sections to try to address the issue, but nothing i've tried has worked. nor has anyone had a problem identical or even similar to this. btw...in relation to "broadcom", yast tells me that i have "b43-firmware" and "b43-fwcutter" installed. nothing else. i do not have "ndiswrapper" installed, because this gave me problems in 11.2, and this problem mentioned here was happening in 11.3 before i uninstalled "ndiswrapper". and the repos i have are: Packman, OSS, Non-OSS, and Update.
View 9 Replies
View Related
Nov 8, 2010
Sorry for repeating the same old complaint but there doesn't seem to be a common fix: Wireless does not work on my Presario R3000 although SUSE 11.x lists the hardware in the Hardware Information list and the hardware is turned on. Network Manager doesn't display any wireless networks in SUSE while Win 7 can see 4 of them on the same machine. Ubuntu has no problem either
View 1 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
Feb 6, 2011
Just installed 11.3 on a older Dell Dimension 8200 with a D-Link DWA-160 N dual band USB card. The install went ok and the card works (seems a little slow right now but that is next on the list). However, when I run YOU I get the following conflict:
"compat-wireless-kmp-default-2.6.37_k2.6.34.0_12-17.1.i586 requires kernel (default:drivers_usb_core)=6faa2c62dac4f41d, but this requirement cannot be met. Uninstallable providers: kernel-default-base-2.6.34-12.3.i586[openSUSE-11.3 11.3-1.82]"
when the system wants to install patch:Kernel-3038.noarch and patch:Kernel-3709.noarch. I cannot seem to find a suitable provider for the default:drivers_usb_core. Is this something to address here or do I need to go to [URL]?
View 1 Replies
View Related
