OpenSUSE Wireless :: Get A Series Of Errors About ACPI And AHCI Conflicts?
Apr 16, 2010
I have a HP Pavilion dv7-2230sa During boot I get a series of errors about ACPI and AHCI Conflicts, the result of which I have to dissable ACPI with acpi=off. However when acpi=off my wireless Broadcom b43 series refuses to enable the wifi. I just can't press the button that would enable / dissable the wifi.
The wifi is detected, the drivers and firmware are installed, however the light remains firmly in the RED.the ethernet works, sound works fine, There also seems to be an issue with the ATi/Radeon Driver being missing which is causing fatal errors at boot time and also some memory conflicts again causing fatal errors.
I have tried this laptop under opensuse 11.2 and now under opensuse 11.3M5 without sucsess - however to my dislike Ubuntu have managed to resolve this by accident between 9.4 and 9.10 but i wanna use opensuse not ubuntu i have asked them to tell me how they fixed it to share it with you but I am still plowing my way through their forum!
[Code]...
View 9 Replies
ADVERTISEMENT
Jan 14, 2010
Having trouble rebooting a system. Have a Ubuntu 9.10 (2.6.31-16 generic-pae) build on a VMWare installation. The system was fine until I rebooted after an update. Now I get the above message and the system halts loading. Have tried to Grub acpi=off and acpi=force to no avail.
View 1 Replies
View Related
Nov 7, 2010
I have random X freezes (suddenly keyboard and mouse stop to react). Xorg.O.log is error and warnings free. The only problems I see in syslog/ dmesg are related to ACPI.
I have Asus P5E3 Deluxe motherboard. Slackware 13.1
Linux vareg 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux
Code:
Code:
I ahve also today upgraded my BIOS to 1303 version. Still no difference.
View 14 Replies
View Related
Apr 3, 2010
I'm unable to use my "builtin" forcedeth (nForce ethernet card) driver because it conflicts with some of my "builtin" ACPI features. Anybody know what that is so that I don't need to test?
Code:
└┌(%:~)┌- dmesg |grep Force
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[code]....
View 4 Replies
View Related
May 29, 2011
When I run OpenSUSE from the Live CD using normal settings, booting stops with a blank screen a moment after the kernel is loaded. When running it with ACPI disabled, it works, but direct rendering is disabled, even though it detects my video card (Mobility Radeon HD 5650) correctly Here's the Xorg.0.log file: my xorg log - [URL]
View 3 Replies
View Related
Dec 12, 2009
Right now I either can have wireless or sound. When I get sound I lose my wireless which may be due to some kernel issue. I use the madwifi, madwifi-kmp-default, madwifi-kmp-pae, & compat-wireless-kmp-pae for my athero ar 9285. This gets my wireless going.
I followed
SDB:AudioTroubleshooting - openSUSE
and couldn't get sound
Then I followed
Alsa-update-snapshot - openSUSE
I get sound but lose my wireless. I reinstall madwifi-kmp-pae, & compat-wireless-kmp-pae. I have to downgrade some kernel conflicts and I have wireless, but no sound. My sound information is here [URL].
View 8 Replies
View Related
Aug 11, 2010
I'm a total Linux newb, and I seem to have got the wrong laptop for that. An L505D-GS6000. Apparently, it's hard to install linux on it unless you do some things (it stops with a bunch of ACPI errors. I found a solution, but I have no idea how to do it.
To summarize:
for L505D GS6000
Install 10.4
Boot with pci=noacpi
Run HexOr's script found here: [URL]
Get wifi drivers from here [URL]
I have 10.4 working on my Toshiba Satellite L505D GS6000, with everything fine, power controls, trackpad, wifi now." How do I boot with pci=noacpi? How do I run a script?
View 3 Replies
View Related
Jun 25, 2011
I just tried to install CentOS 5.4 on my notebook (HP G42-214BR), I use Windows 7 at the moment.
On the first time I got W7 installed at C: and couldn't istall centos on it. Before trying again I went to Windows and free something like 40GB from C:, but the disc where C: is went from basic to a dynamic disc.
After that I tried to install, and got some errors like:
And the final row was like:
And the installation don't go any further than this. What is going wrong?
View 1 Replies
View Related
Feb 17, 2010
I've been trying to upgrade my installation for some time now and just can't quite get it right. I would upgrade from the DVD but the installer hangs when it says "Looking for installation images on CD device /dev/sr0". However, that's not really my question. I've resorted to the upgrade instructions as found at [URL]. If I don't use the '--skip-broken' option it complains about the following:
abrt-gui-0.0.11-1.fc12.x86_64 from fedora
abrt-libs-1.0.6-1.fc12.x86_64 from updates
samba-3.4.5-55.fc12.x86_64 from updates
samba-client-3.4.5-55.fc12.x86_64 from updates
samba-common-3.4.5-55.fc12.x86_64 from updates
samba-winbind-3.4.5-55.fc12.x86_64 from updates
samba-winbind-clients-3.4.5-55.fc12.x86_64 from updates
If I use the skip broken option, it then complains about:
Transaction Check Error:
file /usr/share/locale/de/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/man/man8/cryptsetup.8.gz from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
I can't seem to remedy this problem. There were other conflicts but I just removed those packages. When I attempt to remove 'cryptsetup-luks' it then tells me it's going to remove something like 200 others which did not sound like a good idea.
View 14 Replies
View Related
May 30, 2010
I have laptop Dell Vostro V13:
[code]...
I'll provide this info, if this can help to improve Debian on this hardware. I always see this ACPI errors in dmesg:
[ 0.084001] ACPI Error: ACPI path has too many parent prefixes (^) - reached beyond root node (20090903/nsaccess-429)
[ 0.084001] ACPI Error (psargs-0359): [^LPCB.EC0_.LANW] Namespace lookup failure, AE_NOT_FOUND
[ 0.084001] ACPI Error (psparse-0537): Method parse/execution failed [] (Node c14edd50), AE_NOT_FOUND
i also attached full dmesg, and some outputs. Hope, that this can be useful for core developers.
View 1 Replies
View Related
Jan 20, 2010
is there anybody who could help me trace the error occurring during compilation/linking of ndiswrapper?The link below leads you to the outputopenSUSE Forums - View Single Post - Fritz WLAN Stik on SUSE 11.2 does not work
View 1 Replies
View Related
Apr 23, 2010
/sbin/udevd --daemon eats about 10-15% of cpu which is quite high. I found out that it is caused by AHCI. If I turn it off in bios, udev takes only about 0-1% of cpu (which I consider normal). However turning AHCI off is deadly for Windows Vista (I have dual boot) - it always ends up with BSOD. Actually, I don't even know what AHCI does. Of course I found some information on the net but I didn't found whether there are some advantages for me. Is it worth 10-15% of cpu (consequently shorter battery life)? On the other hand, I have no interest in changing my bios settings every time I boot to Windows so it would be much confortable to have it turned on all the time. The best solution would be to find out why AHCI does this and how to configure udev to avoid it. And I don't know how.I have OpenSuse 11.2, kernel 2.6.31.12
View 1 Replies
View Related
Nov 12, 2010
One of my 2 harddisks, a Hitachi HDS72101, is very slow, the driver is ahci.
Output of "hdparm -t /dev/sda":
/dev/sda:
Timing buffered disk reads: 8 MB in 3.20 seconds = 2.50 MB/sec
No problem with the other one, a Hitachi HDS72161, the driver is pata_ali.
Output of "hdparm -t /dev/sdb":
/dev/sdb:
Timing buffered disk reads: 224 MB in 3.00 seconds = 74.63 MB/sec
How could I get better performance for /dev/sda ?
My system: openSUSE-11.3 on amd64
View 9 Replies
View Related
Nov 30, 2009
I am using openSuSE 11.2 on a VGN-AR41L. I have also erased the preinstalled Home Vista (what a pleasure). Now to my problem. My system boots correctly but if I press the <ESC> key while booting I can see the following messages:
"Doing fast boot
FATAL: mbcache module not found
FATAL: ahci module not found
"
and the boot process continues normally.
Why this happens? Does this mean that I have a problem that I haven't discovered yet? Is it something that I can ignore? I am using SUSE Linux from version SUSE Linux 8 personal and although I am not a power user I have done my two desertions on this system and I am very happy with SUSE. I have bought SUSE Linux 8 Personal and SUSE Linux 10 all the other versions until today have been downloaded.
View 6 Replies
View Related
Nov 12, 2010
I have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
[weaz ~]$ uname -a
Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
[code].....
View 6 Replies
View Related
May 24, 2010
i have to grep a series say 98782 from a group by series in a file ,how can i grep the series.
View 6 Replies
View Related
Jun 13, 2011
Trying to get this working via wireless connction with 11.04. So far I've managed to install (correctly I think) hplip-3.11.5.run. If I select what I think is the correct option, when it gets to the configuration proceedure, it asked me to temporarily connect via usb. However it doesn't see the usb connection when prompted so I can't complete the configuration. If I configure as a usb printer, the first option, it does see the connection and it prints a test page fine. Tried the other options as well but no joy. Wireless connection to windows laptop and main windows pc is working fine.
View 1 Replies
View Related
Aug 28, 2010
I am not able to connect to a wireless network with the HP mini 110 series. When going to the wireless network menu, no networks shows up. if the solution could be described in a very easy "how-to" or just be made into a patch (if there is pathes on ubuntu) it would be nice.
System specifications from HP:
<li style="font-weight: normal; margin-top: 10px;"> Intel(R) Atom(TM) N455 (1.66GHz) + Intel(R) Graphics Media Accelerator 3150 [For Mobile Broadband] <li style="font-weight: normal; margin-top:
[Code]....
View 1 Replies
View Related
Sep 2, 2010
I finally got around to setting up my HP Photosmart c4580 AIO printer today to print wirelessly so that I don't have to be tethered to it with a USB. I found there are many different ways of doing this, each with limited success. So I took a crack at it and this is how I got it to work. (Just an FYI, I don't think that it matters but I am running Ubuntu 10.04 64bit.) Note: I have put in screen shots of the important steps. Also, I have linked at the bottom all the relevant shots. In a terminal type
Code:
hpsetup
After pushing enter a GUI will pop open call "HP Device Manager - Setup". There are four radio buttons, I selected the "Wireless/802.11 (requires a temporary USB connection and is only available for select devices)" one and then clicked Next.
Clicking Next opens a new window for Wifi Configuration. Read what it says (Which is; after configuration setup will continue, this configuration may not work, and connect your printer to your computer by a USB cable!) Now click "Next". Assuming you haven't forgotten to plug your printer into your computer (and turn it on) you will get a "Discovered Wireless Capable Devices" list with something on it. If you do not have anything listed under "Model" and "Device URI" check all your connections and the power to your printer and click refresh. If still nothing I am sorry but this setup has failed you, but if you are lucky and something shows up, click on it and then click next. You have to have wireless internet to continue. The step you are on now has you select your wireless internet connection. Find your's and click next.
Now in the next screen you have to enter in your password for your wireless internet, then push connect. Once you connect you have now just given me access to your online banking and I am withdrawing money as you read this! I'm probably just kidding! I just wanted to make sure I haven't lost you yet. But you do want to enter your password and push enter.
After you push connect you should get a little 'progress' screen. After that is done loading you will see a screen that looks like, Now on a piece of paper or something else, write down your hostname and your IP address. After you have done that unplug the USB from your computer and click finish. Now what happens next, I could not explain. But you remember earlier the wizard said that setup would continue after configuration? Yeah well it didn't for me. And here is what it looked like.
Notice no printers available to select, and even in the terminal it shows an error. Either way, we have the information that we need to finish things up outside of this 'hpsetup' wizard. So just click cancel, close the terminal, and go back to the desktop. Now on your desktop go to System>Administration>Printing That will open a window that shows your current printer profiles. Click the add button to get a screen that looks like this,
Click the plus sign + next to "Network Printer" then click on "Find Network Printer". Now on the right half of that window there is a text box labeled "host:", enter the IP address that you copied down earlier and click the button that says "Find". Once clicking "Find" , one of two things will happen; (1)It will recognize it right away, locate the driver and take you to this screen, after clicking "forward".
or (2) It will take you to a screen showing the host name and the port number. If that happens, no big deal, just click "forward" to get the above screen. Or (3) It will not recognize the IP address that you entered. If this is the case, type in the host name you copied down earlier and click find, then click "forward" to get to the above screen. Or (4) It will not be able to locate a suitable driver. If this last scenario plays out for you then I am sorry but I don't know what to do. So lets just hope that doesn't happen. Alright now that you are on the above screen. Type in a name that you would like your computer to call your printer.
Then click "Apply". Once you click "Apply" that window will close and it will take you back to your printer list. You should notice a new printer in your lineup. Also, it is asking you if you would like to print a test page. Before you pick one, double check that your USB cable is no longer plugged in to your computer from the printer. Now, clicked "No" or "Yes". I chose "No" because test printing takes up a lot of ink. Instead of the test page I just went to my gmail and printed an e-mail. And guess what?! It worked!
View 4 Replies
View Related
May 30, 2011
I recently locked Thunderbird 3.1.8 and Firefox 4.0 using zypper addlock, but now every time I go into Online Update I get "There are some conflicts on the transaction that must be solved manually." with these "options" which I have to tell it "Do not install..." (2x) seen at SUSE Paste.Is Online update trying to update my locked apps or a DEP of the locked app or something else? I can't touch those 2 apps, but how can I "fix" this behavior?
zypper locks output:
Code:
# | Name | Type | Repository
--+--------------------+---------+-----------
1 | thunderbird | package | (any)
2 | firefox | package | (any)
3 | thunderbirud | package | (any)
4 | mozillathunderbird | package | (any)
5 | mozillafirefox | package | (any)
View 9 Replies
View Related
Jul 16, 2011
OpenSUSE 11.4, 64 bits, with
Index of /repositories/KDE:/Release:/46/openSUSE_11.4
and
Index of /repositories/KDE:/Extra/KDE_Release_46_openSUSE_11.4
repositories enabled. Since some days, if I go to YaST2 †’ Package †’ "Update packages if a new version is available" (I'm translating from Spanish) I get a warning that plasma-addons-4.6.5-9.3.x86_64 needs akonadi-runtime < 1.5.40, but that that requirement cannot be match because there are eliminated providers: akonadi-runtime-1.5.3-91.1.x86_64
and non instalable providers: akonadi-runtime-1.5.0-3.3.1.x86_64[openSUSE-11.4-11.4-0]
As "solution" it offers me to not install akonadi-runtime-1.6.0.93.1.x86_64 and libakonadiprotocolinternals1-1.6.0.93.1.x86_64 (which I selected) or to uninstall plasma-addons and kadressbook, which I do not think it is a good idea...
View 7 Replies
View Related
May 3, 2010
Noob to Ubuntu here and I cannot access my wireless connection. It is working fine right now (wired) but I am using the TV stand as my computer desk right now so... not very practical. I tried following the "howto post a wireless issue (ticket)" but there was too much information for me to be able to put on here.
I have my SSID and my WEP. I am on Verizon DSL (only provider in my area). I tried using the wireless setting in network connections and I tried using DSL. I assumed that SSID+Password=Yay the internet works! but apparently not.
View 2 Replies
View Related
Jul 22, 2010
I am new to Ubuntu and I have problem with wireless connection. I could not find any wireless connection at all. I am now using wired connection. Sony Vaio SZ series, Intel Corporation PRO/Wireless 4965 AG or AGN My software details are:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 1 Replies
View Related
Oct 27, 2010
I have SuSE 11.2. There is a security patch for Mozilla NSS Library. However, I get told by YaST that the libfreebl3-3241.noarch conflicts with mozilla-nspr.i586. (There's also a patch for glibc but apparently, it is not "willing" to install this without installing the other patch first). Anyway, I did the following: zypper lp and then rpm -qi libfreebl3 and then zypper lr -d.
Here are the results:
Code:
zypper lp
Repository 'Updates for openSUSE 11.2-0' is out-of-date. You can run 'zypper refresh' as root to update it.
Loading repository data...
Reading installed packages.....
Code:
zypper refresh
Repository '11.2' is up to date.
Repository 'Education' is up to date.
Repository 'Printing' is up to date.
Retrieving repository 'games' metadata [done]
Building repository 'games' cache [done]
Retrieving repository 'Updates for openSUSE 11.2-0' metadata [done]
Building repository 'Updates for openSUSE 11.2-0' cache [done]
Repository 'mozilla/openSUSE_11.2' is up to date.
Repository 'openSUSE-11.2-Non-Oss' is up to date.
Repository 'openSUSE-11.2-Oss' is up to date.
All repositories have been refreshed. I don't know what to do. In order to update FireFox, (on Aug 1, 2010) I had to do as posted in this thread: (instructions by caf4926) Updating firefox. So, I followed these directions: ImageBam - Fast, Free Image Hosting and Photo Sharing. Now what do I do?
View 3 Replies
View Related
May 12, 2009
Woke up this morning and updated my main myth machine, and now mythfrontend won't start. I get this message:
Code:
2009-05-12 07:57:50.003 Closing DB connection named 'DBManager0'
2009-05-12 07:57:50.006 Primary screen 0.
2009-05-12 07:57:50.008 Connected to database 'mythconverg' at host: ***.***.*.***
2009-05-12 07:57:50.010 Using screen 0, 1680x1050 at 0,0
2009-05-12 07:57:50.069 AudioPulseUtil, Error: Failure to suspend: Invalid argument
2009-05-12 07:57:50.070 AudioPulseUtil, Error: Failure to suspend: Invalid argument
2009-05-12 07:57:50.070 ERROR: ***Pulse Audio is running!!!!***
2009-05-12 07:57:50.070 ERROR: But MythTV was not able to suspend it. EXITING!
So, I googled about, and found this thread on a mythtv dev mailing list:
No Start with Pulse Audio (Changeset 20310) | MythTV | Dev
Apparently, the new mythtv .21-fixes is incorporating the .22 pulseaudio check. Myth checks for pulse and exits if it can't kill it. I had sound issues with 11.1 before, and tried to remove pulseaudio but created bigger headaches for myself by doing so. Interestingly, if you log into a mythtv session from the xdm, mythfrontend will run. So, pulse isn't loaded at the session level. But, I'd like some other workaround that allows me my normal desktop at the same time!!
View 8 Replies
View Related
Mar 17, 2011
I can't start NFS server anymore. I get the following message:
"insserv: FATAL: service syslog is missed in the runlevels 4 to use service vboxdrv"
"insserv: exiting now!"
Is it vbox conflicting with nfs server?
View 1 Replies
View Related
Jul 27, 2010
When I try to apply the latest updates on my 11.3 system, I get the following Warning. I think this is because I did the "switch system packages" to Packman after I installed it. What is the recommended solution?
Code:
#### YaST2 conflicts list - generated 2010-07-27 16:30:26 ####
patch:k3b-2785.noarch conflicts with k3b.x86_64 < 2.0.0-1.1.1 provided by k3b-2.0.0-1.pm.2.7.x86_64
[ ] do not install patch:k3b-2785.noarch
[code]....
View 9 Replies
View Related
Jan 28, 2011
where I could lok to resolve this conflict?The command-line: lpotions -p printer -lReports the saved values with an "*" and (for evample: PageSize=Letter, InputSlot=MPT) seem to be in effect. However, the desired page size has been set and subsequently reports in both the web-based CUPS and the YaST printer utilities, as A4
View 7 Replies
View Related
Jan 26, 2010
I was reading this interesting article Fix Ubuntu Dropping Wireless on Suspend/Hibernate Resume - On The Road with Vicky Lamburn and I look in the /etc//default folder an don't see it can anyone tell where to find this in suse?
View 2 Replies
View Related
Dec 26, 2009
My openSuse install can't boot/login with ACPI enabled. I disabled ACPI and have been using it for a while, but would like to get ACPI working.
When I did the install from the livecd it would hang when loading the kernel. I would see the progress indicator get to 99% and then my computer froze. I disabled ACPI from the options and was able to install.
But I never got any error messages or any other output so I don't know what module was causing the problem when being loaded.
View 4 Replies
View Related
