CentOS 5 :: Installation Of 5.4_i386 - ACPI Errors ?
Jun 25, 2011
I just tried to install CentOS 5.4 on my notebook (HP G42-214BR), I use Windows 7 at the moment.
On the first time I got W7 installed at C: and couldn't istall centos on it. Before trying again I went to Windows and free something like 40GB from C:, but the disc where C: is went from basic to a dynamic disc.
After that I tried to install, and got some errors like:
And the final row was like:
And the installation don't go any further than this. What is going wrong?
View 1 Replies
ADVERTISEMENT
Aug 11, 2010
I'm a total Linux newb, and I seem to have got the wrong laptop for that. An L505D-GS6000. Apparently, it's hard to install linux on it unless you do some things (it stops with a bunch of ACPI errors. I found a solution, but I have no idea how to do it.
To summarize:
for L505D GS6000
Install 10.4
Boot with pci=noacpi
Run HexOr's script found here: [URL]
Get wifi drivers from here [URL]
I have 10.4 working on my Toshiba Satellite L505D GS6000, with everything fine, power controls, trackpad, wifi now." How do I boot with pci=noacpi? How do I run a script?
View 3 Replies
View Related
Apr 16, 2010
I have a HP Pavilion dv7-2230sa During boot I get a series of errors about ACPI and AHCI Conflicts, the result of which I have to dissable ACPI with acpi=off. However when acpi=off my wireless Broadcom b43 series refuses to enable the wifi. I just can't press the button that would enable / dissable the wifi.
The wifi is detected, the drivers and firmware are installed, however the light remains firmly in the RED.the ethernet works, sound works fine, There also seems to be an issue with the ATi/Radeon Driver being missing which is causing fatal errors at boot time and also some memory conflicts again causing fatal errors.
I have tried this laptop under opensuse 11.2 and now under opensuse 11.3M5 without sucsess - however to my dislike Ubuntu have managed to resolve this by accident between 9.4 and 9.10 but i wanna use opensuse not ubuntu i have asked them to tell me how they fixed it to share it with you but I am still plowing my way through their forum!
[Code]...
View 9 Replies
View Related
May 30, 2010
I have laptop Dell Vostro V13:
[code]...
I'll provide this info, if this can help to improve Debian on this hardware. I always see this ACPI errors in dmesg:
[ 0.084001] ACPI Error: ACPI path has too many parent prefixes (^) - reached beyond root node (20090903/nsaccess-429)
[ 0.084001] ACPI Error (psargs-0359): [^LPCB.EC0_.LANW] Namespace lookup failure, AE_NOT_FOUND
[ 0.084001] ACPI Error (psparse-0537): Method parse/execution failed [] (Node c14edd50), AE_NOT_FOUND
i also attached full dmesg, and some outputs. Hope, that this can be useful for core developers.
View 1 Replies
View Related
Jan 14, 2010
Having trouble rebooting a system. Have a Ubuntu 9.10 (2.6.31-16 generic-pae) build on a VMWare installation. The system was fine until I rebooted after an update. Now I get the above message and the system halts loading. Have tried to Grub acpi=off and acpi=force to no avail.
View 1 Replies
View Related
May 29, 2011
When I run OpenSUSE from the Live CD using normal settings, booting stops with a blank screen a moment after the kernel is loaded. When running it with ACPI disabled, it works, but direct rendering is disabled, even though it detects my video card (Mobility Radeon HD 5650) correctly Here's the Xorg.0.log file: my xorg log - [URL]
View 3 Replies
View Related
Mar 12, 2009
Centos version: 2.6.18-92.el5
Processor:Intel Xeon L5420 Quad-Core
Guest OS:Windows Server 2008 Web
KVM is istalled using these instructions: [URL] When I run qemu-kvm to boot a VM off the Windows Install .iso with the -no-acpi parameter the VM displays the following:
Windows Boot Manager
Windows failed to start...
Status 0xc0000225
Info: Windows failed to load because the firmware (BIOS) is not ACPI compatible
Without the -no-acpi parameter, the Windows Server 2008 guest shows a blue screen with "stop: 0x000000A5" meaning "The ACPI Bios in this system is not fully compliant to the specification." [URL] 386/32bit and x86/64bit versions of CentOs both exhibit the problem. IT WORKS after I compiled and installed the latest versions of the Kernel (2.6.28.7) and KVM (84) (Using these instructions: [URL] Following advice [URL] I really don't want to run a custom kernel. I compiled various KVM versions with the 2.6.18 kernel but still get the ACPI problem or compiler errors or "Hypervisor too old: KVM_CAP_USER_MEMORY extension not supported" How to get a Windows Server 2008 guest running in KVM on Centos?
View 6 Replies
View Related
Dec 30, 2010
We have two Sangoma U100 products connected to our Acer Aspire Revo 360 (runs on Atom board). The Sangoma USB units provide connectivity to PSTN. Occassionaly and probably in a pattern they have failed every monday for the past month or so.
This is the OS version of CentOS I am running: Linux pbx.local 2.6.18-194.8.1.el5 #1 SMP Thu Jul 1 19:07:06 EDT 2010 i686 i686 i386 GNU/Linux I am wondering if this is a driver issue, ACPI sending computer or ports to sleep, or if it's something else? Any pointers would be appreciated. Following is some portions of dmesg output:
sdlausb: Attaching sdlausb on 2 (BusId 2-1)
sdla-2-1: USB device is connected!
sdla-2-1: USB device is disconnected!
sdla-2-1: USB device is connected!
[code].....
View 4 Replies
View Related
Nov 7, 2010
I have random X freezes (suddenly keyboard and mouse stop to react). Xorg.O.log is error and warnings free. The only problems I see in syslog/ dmesg are related to ACPI.
I have Asus P5E3 Deluxe motherboard. Slackware 13.1
Linux vareg 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux
Code:
Code:
I ahve also today upgraded my BIOS to 1303 version. Still no difference.
View 14 Replies
View Related
Feb 25, 2009
I get the Subject message posted every few seconds in /var/log/messages. I had the same issue with kernel-2.6.18-92.el5.
# uname -a
Linux mine 2.6.18-128.1.1.el5 #1 SMP Thu Feb 12 01:53:39 GMT 2009 i686 athlon i386 GNU/Linux
# rpm -qa kernel* | sort
kernel-2.6.18-128.1.1.el5
[Code]....
View 5 Replies
View Related
Aug 14, 2009
I'm having a bit of a problem with a CentOS install I'm working on.This computer is an Asus M2A-VM mobo with the latest bios and a fully patched CentOS 5.3 system.The system randomly freezes and I've been able to narrow it down to what i think is ACPI issues with the chipset since the system is rock stable if I use the ACPI=off option in grub. However, when I do, I get messages about OHCI and EGCI controllers not having the correct PCI IRQ or somesuch and my USB don't work. Since this system has a usb keyboard, mice and printer, that's a bit of an issue!The system boots fine but will freeze after a random amount of time, sometimes even during startup (after the X Window system has been opened).
I'm at the end of my rope here as I'm admittedly pretty new to Linux (about 2 months experience although I've succesfully set up 5 systems and a zimbra server in that time - slowly learning when I'm trying to do something) and I've been scouring the net to try and find a solution to no avail.I know this particular chipset seems to be very trouble prone if I look around but the only thing I could find about issues like mine was related to ACPI with the chipset but that supposedly solved in earlier kernel revisions (and I have the latest kernel).troubleshoot the defective part of ACPI on my chipset would be appreciated so I can turn off the offending ACPI "feature".
PS : I also get an error message when booting : ACPI expecting a [REFERENCE] package element, found type F7B953PC
View 5 Replies
View Related
Oct 9, 2010
I have tested just now if my small compaq 110 will work with ubuntu 10.04.1, it works from the life CD, but it needs the acpi=off to be set.
Whe I install it from that CD, where do I have to set the acpi=off before I reboot? (the ubuntu will not boot otherwise)
View 3 Replies
View Related
Dec 4, 2010
I've installed 10.10 on a laptop and everything is working except for suspend. The laptop will go into suspend, but will not wake up. I have to hard reboot to recover. From my research it appears to have something to do with ACPI and I would like to switch to APM. However all the instructions I found for doing this seem to apply to older versions of Ubuntu before the switch to Grub2 so there is no menu.lst file to make changes to. So I'm looking to understand how to switch to APM in 10.10?
View 1 Replies
View Related
Jun 24, 2009
I try to set up a 5 nodes cluster and a shared Coraid Storage with conga but it fails with "Shared Storage Support" checked.The message is:'A problem occurred when installing packages: Packages of set "Clustered Storage" are not present in available repository' and it is shown under every node on the next sceen after I submit.The pc where conga runs is on the same subnet (192.168.xxx.xxx) and it has the same /etc/hosts of the other nodes.In that pc runs a proxy too and the nodes go out through it (that pc has 2 NICs)Every node (2.6.18-128.1.14.el5-xen-x86_64) is patched whith the last yum update (this morning) the same is for the pc (2.6.18-128.1.14.el5).Every node has 4 NICs , 2 NICc towards the storage the others in bonding towards the WAN.Every node is exactly alike, they have been installed with the ks.cfg generated from the first node and they all have the support for Clustering, Virtualization, and Clustered Storage.
View 1 Replies
View Related
Apr 25, 2015
Ever since I started to tinker with GNU/Linux on my machine, ACPI has been a thorn in my side.
I can't find any BIOS updates or DSDTs for my laptop, either.
The only distro I've ever gotten to boot without acpi=off is Fedora 20 with the 3.11 kernel and nohz=off parameter. Which leads me to believe a change in the kernel after 3.11 is to blame.
Anyways, I have installed wheezy 7.8 XFCE with LVM encrypted, but alas I am stuck booting with the ACPI=off parameter.
The installation CD booted perfectly, with my wireless card working (an indication of ACPI functioning) as well.
This leads me to believe that it is possible to have a stable wheezy install on this machine.
The install disc used the parameters: video=vesa :ywrap,mtrr and vga=788.
I tried these, but the boot hanged after "switching to clocksource: acpi_pm".
How I could track down the problem with ACPI on my machine?
View 1 Replies
View Related
Jan 30, 2011
I have tried both DVD and CD (both are MD5-checked) of both Lenny 5.0.8 and Squeeze RC on my HP DV7-3074CA. (a.k.a 3085DX)When I choose a graphic install, it just hangs after loading the initial files.When I choose the normal install, It gives the following error:
[1.383207] ACPI: EC: Input buffer is not empty, aborting transaction.
Is there a boot command I can input to override this? I tried removing the battery slot, but the only difference is that that message does not appear, but the setup hangs anyway.
UPDATING:Tried "pci=noacpi" but that did lead to a kernel panic.[1.547564] Kernel panic - not syncing: Attempted to kill init!
View 7 Replies
View Related
Jul 8, 2009
I just installed CentOS 5 today. Had terminal open and got these errors:Quote:Message from syslogd@ at Wed Jul 8 12:38:33 2009 ...localhost kernel: Uhhuh. NMI received for unknown reason a0 on CPU 0.Message from syslogd@ at Wed Jul 8 12:38:33 2009 ...localhost kernel: You probably have a hardware problem with your RAM chipsMessage from syslogd@ at Wed Jul 8 12:38:33 2009
View 4 Replies
View Related
May 4, 2010
The problems I was having earlier: [URL]seemed to be solved.
I was not getting any error messages after restart. I should have powered down fully, but did not think that it would make a difference. :(
The same issue is again occurring, but after shutdown ONLY and only on the first boot. After the first boot, a system restart will not cause any error messages. (I have rebooted at least ten or twenty times to make sure)
But after a system shutdown, the first boot hangs up and I get the
"Red Hat nash version 5.1.19.6 starting hdb: timeout waiting for DMA hdb: drive not ready for command"
errors five or six times before each boot. Also the system boots very slowly the first time.
I used the getinfo.sh all command and posted the info to the suggested site here: [URL]
Is it possible this could be a hardware issue? This is an old salvaged HDD. Ive changed everything I c an think of in the BIOS with no results.
I have used the hdparm -d /dev/hdb command and verified that dma is not being used on initial boot or after a shutoff but IS being used after a reboot...
here are the HDD settings
/dev/hdb:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
[Code]....
View 2 Replies
View Related
May 17, 2010
I installed the VSFTPD from YUM and installed the webmin module.i can connect to the server with Telnet but can�t list files.When i try to connect with a FTP client i get the following errors: An error occured openig that folder on the ftp server. Make sure you have access to that folder.
200 Switching to ASCII mode.
227 Entering passive mode (172,20,1,5,69,210)
How to i choose Users and what folders to use??
View 19 Replies
View Related
Sep 14, 2010
I've made a CentOS 5 x86_64 setup last year, around november/december.This system is supposed to operate as a home router/gateway, firewall, nas, small intranet/extranet server and media center.I've previously built a system using older parts (Pentium III 866MHz), and had on it CentOS 5 x86.It successfully served the same purpose (except nas and media center) for quite some time, about 1-2years, until i felt i needed better hardware (more memory, speed and disk space mainly) and 64-bit support.
Part of this intended setup isn't finished (router/gateway, firewall, media center), partially because i'm still lacking a good 1000mbps switch and a supported wireless n 3-antenna card in AP/server mode.In the previous setup, i had router/gateway, firewall and small intranet/extranet server working, with a crappy 100mbps switch (the switch is broken now).the new setup has run pretty well, it had been upgraded 2 times, etc...But since it has been installed, even before any updates, upgrades or repo additions, there has been always warnings/errors during kernel boot.I'm listing my specs, configs, versions and logs bellow. all the partitions, RAID and LVM were created during CentOS initial setup.
Hardware:
Case:1x Cooler-Master CM-690 II Advanced (RC-692-KKN2)
PSU:1x Corsair VX450W (CMPSU-450VX)
[code]....
View 7 Replies
View Related
Aug 27, 2011
i rebooted my centOS 5.3 server an I got the the errors below. I need to recover the information its very critical.
Loading ahci .ko module
Loading dm-mem-cache .ko module
Device-mapper: uevent: version 1.0.3
Device-mapper: ioct1: 4.11.5-ioct1 (2007-12-12) initialized: dm-devel@redhat.com
Loading dm-log. Ko module
[Code]....
View 1 Replies
View Related
May 26, 2010
Im running an update through YUM from my CentOS5 64bit box and came across this error:Transaction Check
Error:
I've done some research on this and found solutions on how to rectify (i.e. reconfig YUM repositories etc.) but still same issue.
View 4 Replies
View Related
Aug 1, 2009
I'm running CentOS 5.3 x64 within a 32 bit version of Windows XP via VirtualBox. What I'm trying to do is install Eclipse such that I can code in both C++ and Java. I'm going to need to eventually add the OpenMP library, but that's later on. Right now, I'm just trying to get Eclipse to that point, I have the gcc and jre installed...it's just that Eclipse is not wanting to cooperate.
I did uninstall the open-jdk and install the Java SE 6u14. java version "1.6.0_14" Java(TM) SE Runtime Environment (build 1.6.0_14-b08) Java HotSpot(TM) 64-Bit Server VM (build 14.0-b16, mixed mode)
And the gcc... gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
I was able to install the Eclipse SDK using yum...
Eclipse Platform
Version: 3.2.0
Build id: M20060921-0945 (CentOS release 5 (Final))
However when I go to update it using Eclipse's update utility to install from the Eclipse Project Updates (in this case, Eclipse 3.2.2 update) I get:
Unable to complete action for feature "Eclipse Platform" due to errors.
Unable to complete action for feature "Eclipse RCP" due to errors.
Unable to create file "/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp". [/usr/share/eclipse/plugins/com.ibm.icu_3.4.5.20061213.jar1249125532555.tmp (Permission denied)]
[Code].....
View 2 Replies
View Related
Aug 2, 2009
I have just installed a fresh copy of CentOS 5.3 and from the get-go, the NIC started dropping packets like crazy. I even closed the port on the switch,. moved the cable to a different port,. All yield the same "dropping packets" behavior. Zero on the errors, just dropping packets. Should I stick a diff nic instead?
View 1 Replies
View Related
Aug 23, 2009
My box is centos 5.3 x86. At booting, ipsec_setup messages are coming as attached picture.
And dhcpd also comes "failed".
View 3 Replies
View Related
Sep 9, 2009
How to figure out why there are errors on bond0(eth0)
Transfer speed is in KB
View 1 Replies
View Related
Oct 8, 2009
I've installed a 500 Mb WD HD (Sata3) in my Centos 5 Server (AMD QuadCore) - Linux 2.6.18-128.el5 #1 SMP (x86_64)
Fdisk keeps failing with the following message - kernel: ata1: SError: { HostInt Handshk }
Tim Weil
Silver Spring, MD.
tweil@securityfeeds.net
View 1 Replies
View Related
Oct 26, 2009
When using YUM UPDATE from the prompt more than 230 items are scheduled for update however when the download process has completed I receive errors regarding Perl dependences such as:
file /usr/lib/perl5/5.8.8/List/Util.pm from install of perl-5.8.8-27.el5.x86_64 conflicts with file from package perl-5.8.8-18.el5_3.1.i386
I am unsure how to overcome this. It occurs on two different servers.
View 7 Replies
View Related
Apr 17, 2010
When try to yum install sendmail geting errors:
View 3 Replies
View Related
May 3, 2010
I am a complete novice when it comes to Linux, but want to learn, and installed CentOS5 on an old P4 Dell I had lying around.
Dell Dimension 8100 BIOS is version A02
Install seemed to go fine, but when I power up I get the following message
Red Hat nash version 5.1.19.6 starting
hdb: timeout waiting for DMA
hdb: drive not ready for command
this happens a few times each, then CentOS finally loads.
If Im understanding this right, DMA is direct memory access.
Is it possible the hard drive, motherboard etc does not support this?
View 5 Replies
View Related
