I was reading this interesting article Fix Ubuntu Dropping Wireless on Suspend/Hibernate Resume - On The Road with Vicky Lamburn and I look in the /etc//default folder an don't see it can anyone tell where to find this in suse?
View 2 Replies10.04 64 bit won't boot.
error message: enabling additional executable binary formats binfmt-support /usr/share/acpi-support/power-funcs: No such file or directory
When I run OpenSUSE from the Live CD using normal settings, booting stops with a blank screen a moment after the kernel is loaded. When running it with ACPI disabled, it works, but direct rendering is disabled, even though it detects my video card (Mobility Radeon HD 5650) correctly Here's the Xorg.0.log file: my xorg log - [URL]
View 3 Replies View RelatedI use Slackware 13.37 32-bit version on ThinkPad X60s. I compiled two Window Maker dockable applications monitoring the processor temperature, fan speed, and battery status: wmpower (see: [URL]) and wmlenovo (see: [URL]). Both these applications refuse to work.
wmpower displays the messages:
Code:
CPU frequency scaling available
No power management subsystem detected
No power management support...
wmlenovo displays the message:
Code:
No ACPI support in kernel
Did I missed something obvious during the configuration of the system and ACPI doesn't work for me or there's some more serious problem with my system?
what command can i use to save the settings in acpi-support?
View 1 Replies View RelatedI am renting a dedicated server and I'm following a tutorial to install rutorrent. I'm asked to:
sudo apt-get install -y build-essential pkg-config libcurl4-openssl-dev libsigc++-2.0-dev libncurses5-dev lighttpd nano screen subversion libterm-readline-gnu-perl php5-cgi apache2-utils
But continually get this error ...
sudo apt-get install -y build-essential pkg-config libcurl4-openssl-dev libsigc++-2.0-dev libncurses5-dev lighttpd nano screen subversion libterm-readline-gnu-perl php5-cgi apache2-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version.
pkg-config is already the newest version.
libcurl4-openssl-dev is already the newest version.
libsigc++-2.0-dev is already the newest version.
libncurses5-dev is already the newest version.
lighttpd is already the newest version.
nano is already the newest version.
screen is already the newest version.
subversion is already the newest version.
libterm-readline-gnu-perl is already the newest version.
php5-cgi is already the newest version.
apache2-utils is already the newest version.
The following packages were automatically installed and are no longer required:
xserver-xorg-video-amd linux-headers-2.6.24-16-generic
linux-headers-2.6.24-16
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up acpid (1.0.4-5ubuntu9.3) ...
* Starting ACPI services...
acpid: can't open /proc/acpi/event: No such file or directory
invoke-rc.d: initscript acpid, action "start" failed.
dpkg: error processing acpid (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of acpi-support:
acpi-support depends on acpid (>= 1.0.4-1ubuntu4); however:
Package acpid is not configured yet.
dpkg: error processing acpi-support (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
acpid
acpi-support
E: Sub-process /usr/bin/dpkg returned an error code (1)
I have followed ideas posted in different threads for this problem but none have worked. I'm new to linux so here comes the dumb questions. What is acpid and what problems will it cause if ignored?
Having trouble rebooting a system. Have a Ubuntu 9.10 (2.6.31-16 generic-pae) build on a VMWare installation. The system was fine until I rebooted after an update. Now I get the above message and the system halts loading. Have tried to Grub acpi=off and acpi=force to no avail.
View 1 Replies View RelatedI have random X freezes (suddenly keyboard and mouse stop to react). Xorg.O.log is error and warnings free. The only problems I see in syslog/ dmesg are related to ACPI.
I have Asus P5E3 Deluxe motherboard. Slackware 13.1
Linux vareg 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux
Code:
Code:
I ahve also today upgraded my BIOS to 1303 version. Still no difference.
I have GParted installed, running openSUSE 11.3 with GNOME. When running GParted, it always grayed out most file system actions, supporting only hfs fully. This made no sense, as I had all the required packages installed for other file system support. However, I recently figured out how to get it to work. Using the installed menu button doesn't work, running "gnomesu /usr/sbin/gparted" doesn't work; to get it to work, I have to open up a terminal, type "su -" to log in as root, and then run gparted. The menu button and gnomesu both prompt for a password, so it should be running as root, but launching it through the root terminal is the only way to actually get it to work. Is one root different from another?
View 5 Replies View RelatedMy openSuse install can't boot/login with ACPI enabled. I disabled ACPI and have been using it for a while, but would like to get ACPI working.
When I did the install from the livecd it would hang when loading the kernel. I would see the progress indicator get to 99% and then my computer froze. I disabled ACPI from the options and was able to install.
But I never got any error messages or any other output so I don't know what module was causing the problem when being loaded.
Since 2.6.31 kernel there has been need for ACPI drivers to get hwmon information (If one is not willing to get it old way). I have atk0110 module working well on my Asus mobo, but I haven't been able to figure out how to get same information from MSI K8N Neo4 motherboard. I guess asus_atk0110 module with Asus mobo is the one that does the trick and naturally it won't work on MSI mobo so does anyone know how to get hwmon information through ACPI with my MSI mobo?
View 1 Replies View RelatedAfter upgrading to 11.2 my laptop HP dv9000 I'm getting some errors:
ACPI Error (psargs-0359): [2012] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007fbf45f0), AE_NOT_FOUND
I'm using a purpose built computer with Intel Atom N270 CPU and running OpenSUSE 11.2 (Intel� 945GSE + ICH7-M chipset)
If I leave ACPI = Enabled in the BIOS Setup, then the Yast Hardware Profile shows 2 x N270 running at 800 MHz.
If I turn ACPI = Disabled in the BIOS Setup, then the Yast Hardware Profile shows 1 x N270 running at 1.60 GHz.
Anyone experienced this with their system? Intel Atom N270 is a single core, so why is it seen as a dual core with ACPI on? Based on the above, should I simply leave ACPI turned off?
I have an old laptop (asus M6 ca. 6 year old) with dual boot linux windows. Untill Saturday linux=suse 11.0, Saturday I have made an upgrade to opensuse11.4.
I have boot up/down many times almot everything was working properly except the battery status ... I have thought .. "I'll think about it later".
Then out of the blue on sunday my laptop does not boot anymore, the boot hangs. I then have realized taht the failsafe boot was working properly.... ok I have remembered the wrong battery signal and tried the normal boot + acpi=off .. and .. it boots!
OK, the acpi is the problem. I have never made an update of my BIOS (this means it is now old), but I do not really want to update it now. with suse 11.0 the acpi was working properly, I have never have touched the acpi boot option and I had all acpi functionality working (battery, suspend .. etc)
how to let acpi work (at least for the main features .. batetry, fan speed, HT ... etc)?
It can be that the old kernel boot was using some "specific flags", (an installation is cleverer than an upgrade ..?!?!) but unfortunatelly it looks to me that nothing has remained from the old installation .. so I do not know ...
My ACPI and KDE Battery Monitor both report my battery as being 78% charged, even though I normally use it plugged in and it should be fully charged. I've found a bug report of the same thing in Ubuntu, but it seems to only happen to Sony laptops and I'm using a Lenovo G560. Plus, the bug is pretty old. Does anybody have a clue how to find out if my battery really isn't charging or if it's a software problem?
The bug report is here: [URL]
It seems to occur with laptops with "smart" battery configuration settings in Windows. As I've never had Windows on this computer, that possibility is already shut out.
I have a HP Pavilion dv7-2230sa During boot I get a series of errors about ACPI and AHCI Conflicts, the result of which I have to dissable ACPI with acpi=off. However when acpi=off my wireless Broadcom b43 series refuses to enable the wifi. I just can't press the button that would enable / dissable the wifi.
The wifi is detected, the drivers and firmware are installed, however the light remains firmly in the RED.the ethernet works, sound works fine, There also seems to be an issue with the ATi/Radeon Driver being missing which is causing fatal errors at boot time and also some memory conflicts again causing fatal errors.
I have tried this laptop under opensuse 11.2 and now under opensuse 11.3M5 without sucsess - however to my dislike Ubuntu have managed to resolve this by accident between 9.4 and 9.10 but i wanna use opensuse not ubuntu i have asked them to tell me how they fixed it to share it with you but I am still plowing my way through their forum!
[Code]...
i am trying to install the new openSUSE 11.3 version but i can't install it without setting the ACPI mode to OFF. Is the new kernel support this hardware? (Toshiba Satellite A505-s6033) i had this problem already with Ubuntu 10.4 LTS and i had have to recompile the kernel with this patch: Some buggy BIOS may modify DSDT memory when acpi enabled. So we copy DSDT for safe.
I thought the 2.6.34 kernel already have this patch but it seems i was wrong... So if i will install the system with ACPI on OFF mode i will be need to recompile the kernel with this patch to get things working?
(Opensuse 11.4, nvidia, core2) PROBLEM: cpu goes into C3 powersaving state even on full load (even when disabled from bios) (acpi=off prevents this). opensuse 11.4 kernel ignores boot option processor.max_cstate=2 (option has no effect). cpufreq util should be able to change governor policy to performance, however acpi-cpufreq driver doesn't load: modprobe acpi-cpufreq -> FATAL: error inserting acpi_cpufreq (/lib.../acpi-cpufreq.ko): No such device
View 7 Replies View Relatedi have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I installed all the graphviz* in the yum, but when I entered 'dot -T?' in the terminal, it showed that:
'Format: "?" not recognized. Use one of: bmp canon cmap cmapx cmapx_np dot eps fig gd gd2 gif gtk gv ico imap imap_np ismap jpe jpeg jpg pdf plain plain-ext png ps ps2 svg svgz tga tif tiff tk vml vmlz vrml wbmp x11 xdot xlib'
Why does it have no hpgl file format? I check the documents of Graphviz, it says 'dot' support the hpgl support, so I think maybe it is due to fedora 11...
My kernel version is: 2.6.30.9-102.fc11.i586
Dot version is:
I was wondering - is there any multi touch gesture support in openSuse 11.4? I have enabled multi touch scrolling under the 'Mouse' module in Yast, and it works fine. However, i was wondering if a multi touch gesture set is available - such as pinch zoom, or even custom gestures mapped to keyboard combos - e.g. using a spiral to launch terminal?
System - Acer Aspire One D255 (n550 version)
Mouse Pad - SynPS/2 Synaptics TouchPad
An Audacity build for Fedora 9 that has MP3 import and FFMpeg support built-in?
The one provided in Fedora-suggested repositories (audacity.i386 0:1.3.7-0.4.beta.fc9.2) is useless - has none of the above. One can't import MP3, WAV, OGG,... - nothing. The only option is to record and export to MP3 (with Lame).
To be honest, I can't understand why people are supplying such builds.
I understand it's quicker to build it from soruces in my case, but if anyone cares to replace the mentioned version with actually useful one, it could be a good deed.
I'm running Ubuntu Server 11.04 (no desktop installed). I'm wondering how I install the necessary support for Japanese text because I have numerous files with Japanese file names and they all show up as garble. I would also like Icecast to broadcast the proper song names with Japanese characters.
View 1 Replies View RelatedHow to enable java support in php.ini file.
View 1 Replies View RelatedI want to send a PGP encrypted file to a friend who (unfortunately) probably doesn't even have any idea what PGP is. He runs Windows XP. I know I can encrypt and decrypt PGP files easily and freely on Ubuntu, but I have no idea about how to handle PGP in XP... I tried downloading a PGP file in an XP virtual machine to find out, and Windows was pretty much unable to identify the file type. What kind of software on Windows (that is completely free and trustworthy) would be able to decrypt my PGP files?
View 9 Replies View RelatedI want to download a software and it is in .rar File. So I put this in the terminal: Code: sudo apt-get install unrar It installed fine but now how do I open the Rar File? Also is it true that Linux doesn't support many softwares?
View 4 Replies View Relatedwhen I installed network sharing I accidentally installed file sharing for Windows networks to. How can I remove windows networks file sharing and keep only ubuntu's own network file sharing?We have wireless network and only Ubuntu machines connected to it
View 2 Replies View RelatedI need to know the header file used at 'c' to support openoffice writter at REDHAT4. I plan to write a c++ program for something like spellbee game. so instead of giving a txtfile which has a list of words as a source for the game I decided to use some header file. My assumptions are: Since the redhat4 is written through the "C" language and as well as the openoffice writter which is a supporting package at this os too might have the linker right. At openoffice writter we have the spellcheck feature which might had a source from where it checks the words whenever we type something at openoffice writer. So is it possible to use those header file or linkage source at my c++ spellbee game program instead off creating the list about few bunch of words.
View 1 Replies View Relatedi'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
View 4 Replies View RelatedI have been using Suse since version 6, now I installed 11.4 64bit - great distro, but still have no PHP5-MSSQL support. Why is that? FC supports it, why not Suse?
Is there, maybe, a current 64bit PHP5-MSSQL RPM from custom repository?
Workaround: Is there another way (or even different ways?) to connect to MSSQL server from PHP and if yes