is there anybody who could help me trace the error occurring during compilation/linking of ndiswrapper?The link below leads you to the outputopenSUSE Forums - View Single Post - Fritz WLAN Stik on SUSE 11.2 does not work
View 1 RepliesAccording to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedI recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies View RelatedI have a Realtek RTL8187SE wireless card that out of the box will only connect to Open Wireless Networks. I need to know how (and if) I can install NDISwrapper in OpenSuse 11.4 (KDE), anytime I have ever used a KDE distro, it seemed NDISwrapper didn't work I want to give OpenSuse a shot, but this is one of the things holding me back. I'm am currently posting from the LiveCD and it's very nice! I will be able to do a full install!
View 9 Replies View RelatedI have to use ndiswrapper to get my wireless card to work (Cheap D-link usb wireless). I have never had a problem in ubuntu releases with getting it up and going, but in Fedora and now Opensuse I am struggling. I have everything setup with no errors. Ndiswrapper lists my drivers as installed and my hardware present. lsusb also has it listed. but when I modprobe ndiswrapper, I am getting no errors, but I am also not getting wlan0 to show when using iwconfig. I also noticed when modprobed the wireless card's light isn't coming on like ubuntu.
View 8 Replies View RelatedI updated to the latest kernel from Suse 11.2 repo. My wireless device won't load firmwares, ndiswrapper won't be a module anymore etc. :
Code:
inux-kqzq:/home/olivier/T l chargement/fwextract3 # modprobe ndiswrapper
FATAL: Module ndiswrapper not found.
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /usr -name ndiswrapper
/usr/sbin/ndiswrapper
^C
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /lib -name ndiswrapper*
/lib/modules/2.6.31.5-0.1-desktop/updates/ndiswrapper.ko
linux-kqzq:/home/olivier/T l chargement/fwextract3 # uname -r
2.6.31.12-0.2-desktop
2.6.31.12-0.2-desktop is uname
and 2.6.31.5-0.1-desktop is the module
I'm trying to build a shared library, and am receiving several undefined reference linking errors. Specifically, ffmpeg linked with libx264. I'm aware that this is not an appropriate forum for questions specific to ffmpeg or libx264. In order for one library / application (ffmpeg) to reference another library (libx264), the linker has to know where the referenced library (libx264.so) is located in the file system.
I'm pretty sure the linker knows where libx264.so is, because I receive a different error message when I run ffmpeg's configure script if the linker can't find libx264.so. In general, should running the install target of a make file be preferred over specifying the appropriate paths in the CFLAGS and LDFLAGS environment variables? I've tried both, and it doesn't seem to make a difference in regard to my error which method I choose.
How exactly is a library referenced? My error messages are
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d26'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d22'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d2'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d20'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d24'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d0'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `q1'
If I can find out what library 'd26', 'd22', etc. are declared in, I should be able to resolve the undefined references. What exactly are 'd26', 'd22', etc.? Are these functions, classes, or something else? How can I find out what functions / classes are defined in a particular library?
since if read all the forums threads, faqs an tutorials i could find, i hope to find some help here.
i just installed openSuse 11.2, KDE 4.3.1 a fews days ago to see what's it all about. i don't have any experience in writing code or anything besides the few little commands i've learnd through my research. the system is running on an old laptop (amd64 3000+) with enough RAM and HD. now i since my wlan-card is detected but won't work due to missing driver i tried this ndiswrapper-method. i used the ndis-version that was included in the openSuse-dvd with no success, then i de-installed this version to try manually. i downloaded version 1.55 from the ndiswrapper-website, logged into the console as superadmin and followed the install-intructions and for intances this tutorial. now i'm even stuck with the "make"-command as the console tells me "If 'make' is not a typo. in earlier attempts while trying to install the wlan-driver through the dvd-given ndiswrapper version i often got the error "makefile:23: kernel tree not found..."
as the welcome-note for this forum demands here's some output from the console linux-g6rk:/home/mat/ndis # lspci -nn
02:09.0 Ethernet controller [0200]: Linksys, A Division of Cisco Systems [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01) [17fe:2220]dmesg|less [0.331220] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support (i guess that's the line telling me that my wlan-card has no firmware as i found nothing else for that matter) i know there many threads about this topic but i've spend the last two days looking for answers and the stuff i found either didn't work or was explained so weird that i could make anything out of it.
I have just installed openSuse 11.4 and have been trying to get my Edimax EW-7711In wireless card to work. I have downloaded and installed NDISWRAPPER but when I type ndiswrapper -i /path/to/rt2860.inf I get a message saying that this is the incorrect driver. However this driver drives the card for both Fedora 14 and Ubuntu 10.10, both using ndiswrapper, so what may be the problem with openSuse 11.4?
View 8 Replies View RelatedI have a problem with the fritz!wlan usb stick. I have installed itth success on another PC by using instructions published here Ndiswrapper - openSUSE.Today I have decided to erase WindowsXP from my wife's computer (that is an identical to the one I use). So I have downloaded the OpenSuse 11.2 DVD and I have performed a completely new installation from DVD.After installation has been executed with success, I have decided to install an internet connection using the istructions above. I told to myself: "it will take 5 minutes, all I must to do is to reply action I have done one month ago... the internet usb-stick is the same, so it will be easy to replicate the process..."I was wrong... When I reach the point where I must "modprobe" the ndiswrapper module I receive what follows:
Code:
linux-2n4g:/home/mila/Desktop # modprobe ndiswrapper
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
[code]...
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
I am using Opensuse 11.2 on an HP Pavilion laptop. The internal wireless (Broadcom device) quit on me - It is no longer detected at boot so I assume it is dead. No problem since I have a D_Link USB adaptor (DWL-G132). To get it working however I need ndiswrapper. I then installed ndiswrapper 1.55 and the user interface supplied with Opensuse. Problem1- The interface says "The program 'kernel-headers' is missing on your system".
I have checked with Yast and the kernel-headers are installed. Problem2- I have downloaded ndiswrapper 1.55 from Sourceforge.net to attempt the traditional installation method. The 'make' command returns the following message: "Cannot find kernel version in /lib/modules/2.6.31.8-0.1-desktop/build, is it configured?."
I have written an OpenGL based program which uses i.a. libjpeg that I want to link statically so I can send it to someone who doesn't have all the libraries needed installed to allow for a dynamically linked executable to run. As such I tried with giving the [b]-static[b] parameter to gcc.
Code:
x86_1$ make
gcc -O3 -c jpegloader.c
gcc --std=c99 -O3 -c --std=c99 -I/usr/include -L/usr/X11R6/lib main.c
[code].....
Why would gcc claim that I'm missing GLUT? This works perfectly fine when I do dynamic linking -- i.e. omitting the -static argument.
I have a HP Pavilion dv7-2230sa During boot I get a series of errors about ACPI and AHCI Conflicts, the result of which I have to dissable ACPI with acpi=off. However when acpi=off my wireless Broadcom b43 series refuses to enable the wifi. I just can't press the button that would enable / dissable the wifi.
The wifi is detected, the drivers and firmware are installed, however the light remains firmly in the RED.the ethernet works, sound works fine, There also seems to be an issue with the ATi/Radeon Driver being missing which is causing fatal errors at boot time and also some memory conflicts again causing fatal errors.
I have tried this laptop under opensuse 11.2 and now under opensuse 11.3M5 without sucsess - however to my dislike Ubuntu have managed to resolve this by accident between 9.4 and 9.10 but i wanna use opensuse not ubuntu i have asked them to tell me how they fixed it to share it with you but I am still plowing my way through their forum!
[Code]...
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View RelatedAfter un-installing ndiswrapper my wireless USB is not being found I can't use it. I have no idea what's going on. My searches have been fruitless and I only have so much longer that I can connect directly to the router. Then I have no internet connection. I have even thought about re-installing or distro hopping, but I like Fedora and don't really want to do that. I have always been told no matter the problem there is always a way around without re-installing, eg this is not Windows.
View 10 Replies View RelatedI'm trying my to get my 3-year-old Dynex wireless dongle to work in Ubuntu 10.04 (64-bit). Borrowing a similar linksys adapter from another computer running Ubuntu, I was able to install NDISGTK and transfer the same drivers that work in my 64-bit Windows 7 installation into my home folder.
Despite the fact that the dongle does not appear at all using lshw -C Network, ndiswrapper -l indicates that the driver is installed and the device is present. I think I found something interesting, though, when I tried this command:
Code:
jimmy@ubuntu:~$ dmesg | grep -e ndis -e wlan
[ 9.321323] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 10.021542] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 10.021549] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 10.021554] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[Code]...
I recently installed ndiswrapper and decided to remove it after some kernel panics. The problem is that it overwrote something because I have the compat-wireless-backport driver installed but 'wlan0' doesn't show up anymore. I can see my wireless card when I type 'lsusb'. Any ideas on how to fix?
View 6 Replies View RelatedI just got a new pc and installed ubuntu 10.04. I have not yet been able to connect wirelessly, but can connect using a hardwire connection.
Code:
kyle@Gracie-pants:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
[code]...
I just installed ndiswrapper so I could install my wireless PCI card drivers.I did that and it is recognized and so is the network I want to connect to.But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected".What could be the problem? It's not like I have a bad connection or anything
View 2 Replies View RelatedI just recently put Ubuntu 10.04 Lucid Lynx on my laptop with windows dual booting. I'm pretty new to all this stuff, so I'm a bit confused. I followed instructions I read on here, but none of it seems to be working. I put all of the 3 Ndiswrapper things on, and then copied the .inf and .sys files from windows into the same directory. I just want to connect to my home network, which has WEP security.
View 14 Replies View Relatedsometime back when installing FC10, i tried installing ndis wrapper, and later i installed the broadcom driver bcm431 (i think). also i didn't remove the ndis wrapper.
all was fine untill a yesterday when ndis wrapper and some related packages got updated which somehow caused wireless to stop working. lspci showed the hardware present.
to get it to work, i did a yum erase ndis-wrapper, followed by a reboot.
it may not be the most elegent way, but it worked for me.
hardware specs:acer aspire 4720Z (mine has broadcom wireless, others may have atheros)
I just installed Ubuntu 10.04 64 bit on my mac as a seperate OS, but I can't get my Internet working. It's wireless and Ubuntu isn't seeing any of the wireless networks in the area. I have installed ndiswrapper and tried installing a driver for my network but it didn't work.t=616801 but when typed in this code: "ndiswrapper -i bcmwl5.inf && modprobe ndiswrapper" I got the "No such file or directory at usr sbin ndiswrapper line 219" error
View 2 Replies View RelatedSince I upgraded to Lucid, I am dealing with serious instabilities related to my wireless card. What happens is that when there is a lot of wireless activity the computer freezes. It is a complete freeze, the mouse stops moving, if something was coming out of the speakers it keeps echoing, and the only solution is to turn off the computer. The bug seems to coincide with the one listed in here
[URL]
My wireless card is Intersil ISL3890/ISL3886. My whole computer is an HP z555. I'm thinking that is should be a bug in the wireless adapter driver, which is p54pci. The only solution I can think of is to blacklist it and set up ndiswrapper. I am not very comfortable with this solution since a native linux driver should be better than ndiswrapper.
Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
I am trying to install my Linksys Wireless-B WPM11v4 card on Xubuntu. I think my main problem is stemming from ndiswrapper not cooperating. It won't install, and something to do with ndiswrapper errors up when I install ndisgtk, which makes it work incorrectly. I think I have the proper driver (I downloaded it from the linksys site. I have the one from the cd, but most of what I said suggested against using it). I have gcc installed and updated (so it tells me). There's a possibility I have not blacklisted something I need too... But I gave myself root access, and edited the blacklist file to block out wireless drivers (I think? I believe that's what the walkthrough I was reading told me to do. It's on WifiDocs? I can't link to it yet.)
I have tried to do it all myself, and I have managed a couple things so far, but I only ever began touching Linux about... 4 days ago? Tops. I would really appreciate anyone's help.
XD
So what I am specifically asking is, can someone identify where I am going wrong, and tell/point me something to fix it? My goal is to install the wireless driver.
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
View 7 Replies View RelatedI've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies View RelatedThis is probably trivial for most linux users, but here is what I did to get wireless working with the Centos 5.5 LiveCD on my Lenovo S12.
For reference, here is the output of the lspci command: