OpenSUSE Multimedia :: Sound Conflicts With Wireless - Speakers Muted
Dec 12, 2009
Right now I either can have wireless or sound. When I get sound I lose my wireless which may be due to some kernel issue. I use the madwifi, madwifi-kmp-default, madwifi-kmp-pae, & compat-wireless-kmp-pae for my athero ar 9285. This gets my wireless going.
I followed
SDB:AudioTroubleshooting - openSUSE
and couldn't get sound
Then I followed
Alsa-update-snapshot - openSUSE
I get sound but lose my wireless. I reinstall madwifi-kmp-pae, & compat-wireless-kmp-pae. I have to downgrade some kernel conflicts and I have wireless, but no sound. My sound information is here [URL].
View 8 Replies
ADVERTISEMENT
Oct 24, 2010
i can play a dvd or play a film from my hard drive , my media player can playmp3but i just have no sound ..i have made sure nothing is muted ...suse linux 11.2 kde 4.3.5
View 9 Replies
View Related
Apr 30, 2010
I have a Dell Vostro 1014 laptop and I just installed Ubuntu 10.04. The problem I'm facing is that the sound output goes to both the built-in speakers and headphone jack.
$lspci -v
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Dell Device 0401
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at f6afc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
$aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 0/1
Subdevice #0: subdevice #0
head -n 1 /proc/asound/card0/codec*
Codec: Conexant ID 5067
I've searched through /Documentation/sound/alsa/HD-Audio-Models.txt. But I can only see Conexant models upto 5066.
View 9 Replies
View Related
Jan 14, 2011
I get sound from my speakers but not from my headphones. When headphones are plugged in the speakers are muted. In the mixer, all sliders are at 100%. Headphones were tested and worked on another system. Here is some information about my system.
Code:
root@laptop= /home/tom # lspci (snip)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) (snip)
Code:
root@laptop= /home/tom # uname -a
Linux laptop 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 x86_64 x86_64 GNU/Linux .....
Code:
links to sound configuration
ImageBam - Fast, Free Image Hosting and Photo Sharing
ImageBam - Fast, Free Image Hosting and Photo Sharing
Dell Studio 1745
View 9 Replies
View Related
Jun 6, 2011
Headphone jack seems completely unresponsive after a fresh install of openSUSE 11.4. Here are my outputs:
[URL]
-->From rpm -qa '*alsa*':
alsa-devel-1.0.24.1-4.7.1.i586
alsa-plugins-maemo-1.0.24-6.1.i586
alsamixergui-0.9.0rc1-749.1.i586
[Code].....
View 9 Replies
View Related
Jun 16, 2010
I have two laptops, one has sound muted at start up (karmic), like in this thread , and i like it and in one the sound is not muted and i want it too be (lucid), like in this threadhow do i set to mute on startup (or shutdown to be more precise)?
View 9 Replies
View Related
May 24, 2011
I've seen loads of threads about this sound issue, and I've experienced/fixed it before (after HOURS of searching), but this time it's worse. I'm running Maverick. I accidentally muted my sound and shut down with it muted. Upon restart, no sound is present through headphones, speakers, anything. The sound card still shows up in the options. Sound also has been disabled on my LIVE DISC OF 11.04These sound problems are the absolute worst part of Ubuntu. I'm almost ready to jump ship back to...vista *shudder*
View 9 Replies
View Related
Aug 31, 2010
Installed 11.3 with KDE, actually it is working good with 512MB RAM. But there is not loud, but annoying noise, coming from speakers, some electronic noise. No such sound in XP. code...
View 9 Replies
View Related
Sep 23, 2010
I have an old Acer Travel Mate 290 with OpenSuSE 11.3 (LXDE) 30G and 240Mb RAM. I don't have sound in the internal speakers, I only have sound through the headphones. Here you will find the information of alsa-info.sh [URL]
When I type:
rpm -qa '*alsa*'
alsa-utils-1.0.23-1.8.i586
alsa-plugins-1.0.23-1.9.i586
alsa-1.0.23-2.12.i586
alsa-firmware-1.0.23-1.2.noarch
alsa-oss-1.0.17-29.2.i586 .....
View 6 Replies
View Related
Jul 26, 2011
I've got a 2nd sound card connected via usb that I use via usb:
Bus 006 Device 002: ID 08bb:2904 Texas Instruments Japan PCM2904 Audio Codec
Every time I hibernate the PC, when i comes back up I have to go into the mixer app to unmute the thing.. I this some sort of "feature"? I hope not.. running xubuntu 11.04..
View 1 Replies
View Related
Apr 24, 2010
I might have a different problems as I have a newer laptop, a HP dv6-2170us with intel i5 cpu. I had no wireless with the 2.6.31 kernel so I upgraded to the 2.6.34 and had to manually compile my wireless driver. Everything works great now except the sound issue. I thought it use to work out the box with the old kernel, but then again I might be wrong. I knwo it works in the "other os" dual booting and all. Its a not a huge issue, but hopeing I could resolve it. Here is some of the info from reading some of the other posts. the model=dell-vostro I just tried to see if that works, which is doesnt, so thats why thats in my sound.conf file.
[Code].....
Have I missed anything? I have tried the fix here: Audio coming from both headphone and laptop speakers - Page 3 - openSUSE Forums page 3 about adding a repo and upgrading, but that upgrade wants me to revert back to the older kernel in which case I dont have wireless support or acpi working proporly, so thats not a doable thing for me.
View 6 Replies
View Related
Jun 5, 2011
I have Hp Pavillion dv4-1235ee Notebook PC with windows vista.there is no sound coming from internal speakers, 3d sound blaster pro compatible sound 16 bit integrated.
View 1 Replies
View Related
Apr 16, 2010
I have a HP Pavilion dv7-2230sa During boot I get a series of errors about ACPI and AHCI Conflicts, the result of which I have to dissable ACPI with acpi=off. However when acpi=off my wireless Broadcom b43 series refuses to enable the wifi. I just can't press the button that would enable / dissable the wifi.
The wifi is detected, the drivers and firmware are installed, however the light remains firmly in the RED.the ethernet works, sound works fine, There also seems to be an issue with the ATi/Radeon Driver being missing which is causing fatal errors at boot time and also some memory conflicts again causing fatal errors.
I have tried this laptop under opensuse 11.2 and now under opensuse 11.3M5 without sucsess - however to my dislike Ubuntu have managed to resolve this by accident between 9.4 and 9.10 but i wanna use opensuse not ubuntu i have asked them to tell me how they fixed it to share it with you but I am still plowing my way through their forum!
[Code]...
View 9 Replies
View Related
Oct 20, 2010
Before I upgraded to 10.10, I would hear sound on both my PC speakers and on my TV. The speakers are connected via the standard speaker out, the TV was connected via the line-out, through a stereo to RCA adapter. Video is supplied to the TV via HDMI. Now that I've upgraded to Maverick, however, I no longer get sound on the TV. This isn't the usual "sound stopped working completely on upgrade" issue, because I get flawless sound via the PC speakers just as before. I've tried most of the debugging steps recommended in other threads about audio, with no improvement.
The weird thing about all this is, when I plug other speakers or headphones into the same port, I hear audio. So I'm starting to suspect that the problem has to do with the HDMI audio out capability on my video card (an nvidia GT 240), which might have suddenly come alive (if not fully functional) with Maverick's new version of ALSA. I don't know what signal(s) my TV thinks it's getting and have no way of troubleshooting things on that side, but it seems possible that the HDMI it's getting video through is also sending a null/silent audio stream, and that stomps the analog audio signal it's getting from my sound card.
I see two output devices in Sound Preferences, "Internal Audio" and "High Definition Audio Controller". "Internal Audio", ie my onboard sound, is what's producing audio via the speakers. HDMI has never produced any audio, and I don't really need it to if I can just make it work the way it did before. I've tried completely disabling that device, even adding the "snd_hda_codec_nvhdmi" module to /etc/modprobe.d/blacklist - no change.
The solution for this could be one of two things: one, I could try to get the HDMI audio out working and let that be what my TV receives, two I try to make the audio setup work as before, with analog audio going to both speakers and TV. Thoughts? I'm leaning towards the latter, ie not bothering with the HDMI audio, as having another audio source would probably mean messing with PulseAudio which has otherwise worked 100% fine for me up until now. If need be I can supply more details on hardware, CLI output etc.
View 2 Replies
View Related
Apr 27, 2011
can't get sound through all 4 speakers.
I have an onboard soudcard (Realtek ALC 883).
View 2 Replies
View Related
Jun 9, 2011
My headset is doing a fine job, using the standard audio connections, but I'd like to be able to use speakers as well. Someone's given me a very basic "soundball" ‒ only visible identification, the word 'goobay' ‒ that's been doing well on another O/S. When I plug it in, it's on speaking terms with the USB port as far as drawing power goes: but doesn't play anything.
The options from Sound preferences don't include anything as obvious as "use USB port/ use audio connectors". Is there an easy answer?
View 6 Replies
View Related
Jun 26, 2010
After updating my kernel my sound stopped working. I followed the sound problems guide in the sticky thread at the top of this forum and I've now got it to the point where I get sound through the headphones but not through the laptop speakers. Here is my sound info (output from alsa-info.sh thingy). I've added various lines to the end of my alsa-base.conf but no luck.
View 9 Replies
View Related
Jul 19, 2010
I'm currently running 32-bit Ubuntu 10.04 on a Pentium 4. I'm currently using the LXDE desktop environment but the problem is the same in GNOME. I have new Altec-Lansing BX1220 speakers. They didn't come with a driver disk and a Google search didn't return any drivers, so they should be plug-and-play. When I plug them in, the light turns on, and with the volume high enough it returns feedback. However, they don't actually play what the computer is playing. I went into alsamixer and made sure all the volumes were turned up; it didn't help. It was plugged into my microphone jack.
View 1 Replies
View Related
Aug 27, 2010
I have installed 10.04 on my sony vaio, model VPCF115FM, and when I plug in my headphones I can hear sound, but not from the speakers when I unplug the headphones. I have checked the alsamixer to make sure nothing was muted.
View 9 Replies
View Related
Nov 11, 2010
I am running Ubuntu 10.10 which is great but since yesterday i have not been able to get a sound out of the speakers?
View 3 Replies
View Related
Nov 14, 2010
Basically, my sound is coming through earphones when plugged in, but not coming through speakers without earphones in. I have followed through the steps of other people with the same problem but no luck.
View 1 Replies
View Related
Dec 1, 2010
Just installed Ubuntu 10.10 with Wubi (took forever to figure out how to get the wubi.exe to recognize the 10.10 iso) and I don't have sound coming from my speakers. Audio works fine with headphones, but output from speakers is non-existent.
I get sound when I boot into Windows 7, so I doubt it had something to be with the actual speakers. I'm really new to Ubuntu (but loving it!) so troubleshooting is a little difficult for me, especially with terminal commands.
View 5 Replies
View Related
May 23, 2011
I replaced the motherboard and now the sound on 11.04 only comes from the headphone jack. however when i boot into bios i can get the bios to beep through speakers. the speakers also do not produce sound on a Ubuntu live CD. Here is my output of lspci so you can see all my hardware inside. p.s. its a laptop dell stidio 1558
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
[Code]....
View 9 Replies
View Related
May 12, 2009
Woke up this morning and updated my main myth machine, and now mythfrontend won't start. I get this message:
Code:
2009-05-12 07:57:50.003 Closing DB connection named 'DBManager0'
2009-05-12 07:57:50.006 Primary screen 0.
2009-05-12 07:57:50.008 Connected to database 'mythconverg' at host: ***.***.*.***
2009-05-12 07:57:50.010 Using screen 0, 1680x1050 at 0,0
2009-05-12 07:57:50.069 AudioPulseUtil, Error: Failure to suspend: Invalid argument
2009-05-12 07:57:50.070 AudioPulseUtil, Error: Failure to suspend: Invalid argument
2009-05-12 07:57:50.070 ERROR: ***Pulse Audio is running!!!!***
2009-05-12 07:57:50.070 ERROR: But MythTV was not able to suspend it. EXITING!
So, I googled about, and found this thread on a mythtv dev mailing list:
No Start with Pulse Audio (Changeset 20310) | MythTV | Dev
Apparently, the new mythtv .21-fixes is incorporating the .22 pulseaudio check. Myth checks for pulse and exits if it can't kill it. I had sound issues with 11.1 before, and tried to remove pulseaudio but created bigger headaches for myself by doing so. Interestingly, if you log into a mythtv session from the xdm, mythfrontend will run. So, pulse isn't loaded at the session level. But, I'd like some other workaround that allows me my normal desktop at the same time!!
View 8 Replies
View Related
Jun 17, 2011
I have Ubuntu 11.04 installed on my Toshiba Satellite C655 laptop. When I plug my headphones, they sometimes work, they sometimes don't, but that's not the main problem. When they do work, sound also plays out of the speakers. The only solutions I was able to find were for earlier versions, which don't work for 11.04.
View 9 Replies
View Related
Jan 31, 2010
I'm running openSUSE 11.1, KDE 3.5.10. I used to get system sounds (like startup etc) and I could get sounds from Amarok when I played .mp3 files.
However, yesterday my Amarok crashed and I could not get any sound from Amarok (I was using gstreamer/auaup engine, didn't have any other engine). But I could still hear the system sounds like shutdown, startup etc.
So I was playing around with KMix and alsamixer settings. I don't have root access on the computer so I can't change any configuration files or anything. Just changed the volume controls etc. But now I can't get any system sounds.
I ran speaker-test and no sound there either. All my mixer volume controls are on max but I can't remember exactly what I changed on KMix. I'm thinking I messed up the switches some how.
View 7 Replies
View Related
Jan 14, 2010
I have an HP Pavilion Desktop computer with integrated speakers in the screen. When I do not have any headphones plugged in my headphone jack, sound is coming out of the speakers.When I plug headphones in my headphone jack, sound is coming out of both the speakers and the headphones. I would like for sound to come only from the headphones when they are plugged in.
View 9 Replies
View Related
Jan 18, 2010
I recently switched to Ubuntu 9.10 from Fedora 12 because it was giving me problems, but now I've run into some problems with Ubuntu. I really only use my computer for internet and music, and I'm not really able to listen to my music.My computer is an HP Pavillion dv7-3060US laptop, AMD 64bit processor, 4gb ram, ATI Mobility Radeon HD 4530 graphics chip and an ATI chipset (not sure which).
I have an altec lansing speaker configuration, with a built in subwoofer on the bottom. My problem comes that the sound is coming out of the subwoofer, not the actual speakers themself. When I try plugging in an external set of speakers, nothing happens, the sound still plays. Switching the device from "Interal audio analog stereo" to the other choices in my list does nothing (system>preferences>sound is the list im talking about)I'm able to hear music through my subwoofer when using totem music player, but neither rhythmbox nor amarok play any music. amarok doesn't play at all, and rhythm box shows the music is loaded but no sound comes out and it looks like its playing it at 2x speed.
I've attempted to follow the comprehensive audio problems guide here but I get to step 3 and the website isnt the same, so I can't continue.These are the outputs from the first few steps:
Code:
aplay -l
root@kadar-laptop:/home/kadar# aplay -l
[code]....
View 7 Replies
View Related
Feb 14, 2010
Until recently, when connected my laptop to the stereo via audio out, i had sound coming only from the stereo. I don't know why and when exactly this happened, but now when the stereo is connected, i get sound from the laptop speakers and stereo speakers simultaneously.Is this a bug? I'd like to mute only my laptop speakers but haven't figured out how. I've tried every setting in "sound" or "audio" or whatever it's called in english, but to no avail.Any ideas how to turn off the laptop speakers?
View 2 Replies
View Related
Apr 4, 2010
I took out some USB speakers that had been working for many months because I needed them on another PC. I plugged the audio out (lime colored female connector on back of Ubuntu PC) into my stereo receiver's VCR audio in (Red and white jacks), no sound. Yes, the cable is fine (same cable I took off the other PC which was working fine), and the receiver is set to VCR. I recall having to go through some hoops to get the USB speakers working way back when. The Pulseaudio volume control shows left and right pulsating bars when I have on Pandora, but sound is obviously not being sent to the right output. I also tried the optical audio out on the PC into the receiver's DSB optical in but again no sound.
View 9 Replies
View Related
