I just got a new pc and installed ubuntu 10.04. I have not yet been able to connect wirelessly, but can connect using a hardwire connection.
Code:
kyle@Gracie-pants:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
[code]...
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
My wireless card (an Atheros AR928x) was not performing very well. At the suggestion of a friend I tried to use NDISWrapper (using the ndisgtk GUI interface) to see if a Windows driver would work better. I found the XP drivers online, tried several versions and, after none worked, I decided that I might as well settle with the crappy quality of the Linux driver and let it go. Sadly, that may not be possible.
I removed the drivers (again via ndisgtk) and now the laptop can't use the card at all. It won't detect any networks (even when just five feet from the router) and I'm not sure what's causing this. I've tried rebooting and rebooting into an older kernel. I checked lspci and it still recognizes the card.
Any idea what's up and how I could fix it?
I have tried to get ndiswrapper to work on an ubuntu 9.04 32 bit system but have yet to succeed. After installing the windows driver, the usb wireless network adapter is recognized but will never connect to the internet. I have disabled the driver included with jaunty. Now what makes this strange (at least to me) is that ndiswrapper works perfectly with ubuntu 9.04 64 bit. It could very well be something that I am not doing in the 32 bit system (but I don't know what that might be).
I have tried ndiswrapper with several other distros with the same result. So, I don't think it is specifically related to ubuntu however, since ubuntu is what I am using, I am posting in this forum hoping that someone might be able to help me. I have several 32 bit machines I would like to set up but cannot until I get this resolved. I have also tried downloading and compiling a native driver with no success either. Anyway, here is my setup:
PC with AMD64 dual core processors running at 2Ghz and 3 GB ram.
Belkin N150 Enhanced Wireless Router
Belkin N150 Enhanced Wireless USB Network Adapter
And an aside: I am using WICD network manager and would like to know what the tray icon means when it says it is connected at say 54%. My question is, 54% of what? In windows this info is given in Mbps which is more meaningful.
I'm trying my to get my 3-year-old Dynex wireless dongle to work in Ubuntu 10.04 (64-bit). Borrowing a similar linksys adapter from another computer running Ubuntu, I was able to install NDISGTK and transfer the same drivers that work in my 64-bit Windows 7 installation into my home folder.
Despite the fact that the dongle does not appear at all using lshw -C Network, ndiswrapper -l indicates that the driver is installed and the device is present. I think I found something interesting, though, when I tried this command:
Code:
jimmy@ubuntu:~$ dmesg | grep -e ndis -e wlan
[ 9.321323] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 10.021542] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 10.021549] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 10.021554] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[Code]...
I recently installed ndiswrapper and decided to remove it after some kernel panics. The problem is that it overwrote something because I have the compat-wireless-backport driver installed but 'wlan0' doesn't show up anymore. I can see my wireless card when I type 'lsusb'. Any ideas on how to fix?
View 6 Replies View RelatedI just installed Ubuntu 10.04 64 bit on my mac as a seperate OS, but I can't get my Internet working. It's wireless and Ubuntu isn't seeing any of the wireless networks in the area. I have installed ndiswrapper and tried installing a driver for my network but it didn't work.t=616801 but when typed in this code: "ndiswrapper -i bcmwl5.inf && modprobe ndiswrapper" I got the "No such file or directory at usr sbin ndiswrapper line 219" error
View 2 Replies View RelatedSince I upgraded to Lucid, I am dealing with serious instabilities related to my wireless card. What happens is that when there is a lot of wireless activity the computer freezes. It is a complete freeze, the mouse stops moving, if something was coming out of the speakers it keeps echoing, and the only solution is to turn off the computer. The bug seems to coincide with the one listed in here
[URL]
My wireless card is Intersil ISL3890/ISL3886. My whole computer is an HP z555. I'm thinking that is should be a bug in the wireless adapter driver, which is p54pci. The only solution I can think of is to blacklist it and set up ndiswrapper. I am not very comfortable with this solution since a native linux driver should be better than ndiswrapper.
Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
I've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies View Relatedi've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View Relatedsometime back when installing FC10, i tried installing ndis wrapper, and later i installed the broadcom driver bcm431 (i think). also i didn't remove the ndis wrapper.
all was fine untill a yesterday when ndis wrapper and some related packages got updated which somehow caused wireless to stop working. lspci showed the hardware present.
to get it to work, i did a yum erase ndis-wrapper, followed by a reboot.
it may not be the most elegent way, but it worked for me.
hardware specs:acer aspire 4720Z (mine has broadcom wireless, others may have atheros)
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
View 7 Replies View Relatedhow to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
I've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.
The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.
ping 192.168.1.1 (the router):
Code:
I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):
Code:
The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.
With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)
lsusb:
Code:
ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):
Code:
ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):
Code:
Code:
I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).
Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?
I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"
result:
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)
So I've posted the result the name of my wireless card below: lspci -nn
Result:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]
[code]...
It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.
According to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedI recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies View RelatedMy wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies View Relatedwlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
Code:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
I've read around blacklisting but I'm not sure on what I should be blacklisting really.
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
I have a Realtek RTL8187SE wireless card that out of the box will only connect to Open Wireless Networks. I need to know how (and if) I can install NDISwrapper in OpenSuse 11.4 (KDE), anytime I have ever used a KDE distro, it seemed NDISwrapper didn't work I want to give OpenSuse a shot, but this is one of the things holding me back. I'm am currently posting from the LiveCD and it's very nice! I will be able to do a full install!
View 9 Replies View RelatedI have an Eeepc 900HD with a rtl8187se wifi card.I have used ndiswrapper (w/Win XP drivers) for it.Some info:
uname -a = 2.6.31.12-174.2.19.fc12.i686.PAE #1 SMP
lspci |grep RTL
01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)
[code]....