I would like the updater applet to offer updates other than security fixes from the base repos. For example I would like to be notified automatically about updates for VLC and Chrome. How do I do that?
View 8 Replies
I'm getting this error:
PackageKit Error dep-resolution-failed: patch:mozilla-nspr-5022.noarch conflicts with mozilla-nspr.i586
Is this safe? A good idea? What's causing this? It's called "pullin-msttf-fonts".
View 5 Replies View RelatedUsing openSUSE 11.3, KDE 4.4.4.
View 1 Replies View RelatedI'm using openSUSE 11.3 with KDE 4.5.4. The updater applet works fine for me, however I think it only checks for updates from the update repo. I tried to modify this behaviour by right clicking the icon and checking "show available updates, when the backend provides it(for experts)" (translation from polish so it may not be 100% accurate) but the behaviour is the same, it only prompts me when there are updates available in the update repo but I would like it also to prompt me when there are updates available in the packman and KDE stable repo. Is it possible to force the updater applet to do this ?
View 3 Replies View RelatedI'm on OpenSuSE 11.1, and since I needed some features of Firefox 3.5.x I manually updated via 1-Click intall to 3.5.8. Now the Updater-Applet signals a security repo update for FF 3.0.18 which is no longer installed since replaced by the 3.5.8, and I see no way to get rid of the red warning sign; this is very bad since now I get no longer informed about other new updates to really installed packages ....
View 9 Replies View RelatedIn OpenSuSE 11.2 YaST -> Online Update Configuration I can configure how often the system should check for updates (i.e. daily, weekly). Does this operate independently from the Online Update Applet(kupdateapplet)? The reason I ask is that the Applet doesn't always seem to work correctly. However, if the system will check for online updates automatically regardless of the Applet, perhaps this isn't an issue. If I can avoid messing with the Applet, that would be great.
View 1 Replies View RelatedI recently switched my server runlevel to 3 and I don't notice any updating of any kind going on, does the updater run in runlevel 3? If it is possible, how do I do it? Is it a service that I need to start? If so, how?
View 2 Replies View RelatedI have installed a base 5.2 server. I updated the network proxies in preferences and also updated the values for internet access. I can't get the package updater to work. I can use "yum update" and this work but I don't want to update everything. I have allowed a full update and one or more of them is affecting an IOZone test I am running to fiber storage. If I run the test to the base install, it completes OK. If I run the test after all the updates, the test fails with file writes and test files diaappearing. In any case, I would like to use the software updated hoping this will allow me to selectively add the updates.There is about 400 updates that get applied. I am currently getting the 5.3 image and will do and install with that to see if the test runs.
View 3 Replies View RelatedAfter Updating to version 8.0 today...
Package Updater GUI is Failing with the message:
No updates are available
No network connection was detected.
=================================
I did updates almost daily on wheezy
Todays updates [via the Pkg Updater GUI] were over 300 meg.
After the updates and reboot
System was showing version 8.0 in the GUI desktop and using 'cat /etc/debian_version'
Then...
From terminal I did ...
apt-get update
apt-get dist-upgrade
The dist-upgrade was over 40 minute and ~ 500meg
Things seemed to go well.
I updated sources.list with apt-spy.
[In order to trouble-shoot: I subsequently commented-out the apt-spy sources and found some generic sources on internet]
==========================================
# sources.list generated by apt-spy v3.2.2
#
# Generated using:
#
[Code].....
apt-get and Synaptic GUI both work.
I did/reviewed some settings in the Synaptic GUI I imported two v8 signing keys into Synaptic from [URL]
Package Updater GUI is Failing with the message: No updates are available No network connection was detected.
When I select package updater for update software it gives an error I am attached my system information & error file.
Error message:-
file /usr/share/emacs/site-lisp/psvn.el from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/de/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/es/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386 .....
I can't make the upgrade..... I've see the dettails and this is what is write: file /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm conflicts between attempted installs of perl-Compress-Zlib-2.015-1.el5.rf.noarch and perl-IO-Compress-2.030-2.el5.rf.noarch file /usr/share/man/man3/Compress::Zlib.3pm.gz conflicts between attempted installs of perl-Compress-Zlib-2.015-1.el5.rf.noarch and perl-IO-Compress-2.030-2.el5.rf.noarch
View 1 Replies View RelatedI am running openSUSE 11.4 KDE 4.6.5 on my desktop AMD64. Just added R47 repo in order to upgrade KDE 4.6.5 to 4.7. However, after running zypper up I saw lots of packages not being updated.code...
View 4 Replies View RelatedFor the past several days the Package Updater has popped up wanting me to install an update to iceweasel. Each time I try to do the iceweasel-31.8.0esr-1-deb8u1 (64-bit) I get the following error message:
E: Internal Error, ordering was unable to handle the media swap
Is there something I need to do?
Since applying a number of updates using the online update tool in Yast, the online update tool can no longer contact the software repositories which were configured in Yast.If i browse to the URL which is configured within the software repo config tool, I can see the updates & folders fine in Firefox.Zypper seems to do the same thing & just sits there if I do zypper update.I see a number of other people in this forum have had the same problems, any ideas as I couldn?t find a resolution?
View 1 Replies View RelatedI read a few threads about updating packages in opensuse 11.3, and about switching to a repository, but I still don't understand a few things. On earlier versions of opensuse I was used to set the repository priorities in an order that was convenient for me, and when I did an update, the vendor changed if needed.
Now, vendor change is not allowed by default, and I don't understand the right way to handle repositories, and updates. I found out that in Software Managment there is an option to allow vendor change, but I'm not sure that's the right way.
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies View RelatedI cant use the option "export" from the VPN settings in the Gnome Network Manager, when I tried to export a popup says "Unknown error"This happend also in 11.3 and now in 11.4, so it is a nm-applet problema I think... Is there any other way to export my VPN connections?
View 5 Replies View RelatedWhen I run updates I get a long list of packages for which it says 'The following package updates will NOT be installed'. I'm wondering why not?
The only thing I can think of is I followed the guide in a sticky thread in the Multimedia forum to get codecs installed, and part of that is to change the vendor of some Opensuse packages to packman.
Code:
~> sudo zypper up
Retrieving repository 'openSUSE-11.2-Update' metadata [done]
Building repository 'openSUSE-11.2-Update' cache [done]
Retrieving repository 'packman' metadata [done]
Building repository 'packman' cache [done]
code....
put off the updater. I've had several complete system crashes after some updates...
View 4 Replies View RelatedI'v not seen any security or any other updates,including firefox for many months(since January or earlier. Is there anything wrong?
View 9 Replies View RelatedEvery time I try to update via the software updater it tells me this: Code: glib-4117.noarch conflicts with ndesk-dbus-glib.noarch < 0.4.1-44.3.1 provided by ndesk-dbus-glib-0.4.1-9.1.noarch I cant even ignore the problematic update
View 3 Replies View RelatedI just got OpenSUSE 11.4 to work on my Gateway NV79. However, I can't get the built-in software updater to download anything. When I click on the updater it starts and begins and appears to be working, but it doesn't do anything. I check the system monitor and it says the updater is sleeping. I can't get the updater to continue.
I'm using a wireless connection. On 64-bit OpenSUSE 11.4 Gnome.
After booting up openSUSE 11.1 i586 this morning, I got a message I had never seen before:
Repository Signature Required
Do you want to accept this repository signature?
package_id:dummy;0.0.1:i386;data
repository_name: repo-update
key_url: [URL]
key_useridpenSUSE Project Signing Key <opensuse@opensuse.org>
key_id:B88B2FD43DBDC284
key_fingerprint:22C07BA534178CD02EFE22AAB88B2FD43DBDC284
key_timestamp:Fri Nov 7 09:10:07 2008
type: gpg
Yes No
So I said Yes. But then it wanted root access, which I declined to provide and canceled the thing, whatever it is. Now, of course, my updater is displaying the yellow triangle with the ! in the center. This is the creepiest thing I have encountered since starting to use openSUSE several years ago. Did this result from some kind of screwup by the folks of openSUSE?
I keep getting this error. packageKit Error dep-resolution-failed: patch:choqok-3320.noarch conflicts with libqoauth1.x86_64 When I go to the YAST software manager and search for libqoauth1.x86_64 it doesn't hit on anything. What gives here?
View 9 Replies View RelatedI'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
My openSUSE 11.4 adventure continues apace, and is brilliant! However, recently the Gnome 3 Software Updater has begun to show me an update I cannot get and actually I don't think I need. It doesn't turn up when updating via YAST, which is fine, but sometimes the Software Updater is a handy thing, and I don't know why this should appear.
The update is xorg-X11-server - Mesa 4546 noarch. This seems to be for Radeon and RadeonHD cards, of which as an Nvidia user I have neither. Like I say when using YAST there's no sign of it, but it just turns up in the Gnome 3 Software Updater every day. If I try to install it it tells me there are failed dependency resolutions and it doesn't install it. Is there anything I can do to remove this unwanted update from the Gnome 3 updater?
What's the best way to permanently disable the package kit update applet in fedora 12. i really dislike my bandwidth being robbed unnecessarily from the other computers running fedora on the network.
System->Preferences->System->Software Updates is not working as it is supposed to.
What is the role of PackageKit? Do i really need it?
can anyone please tell me which package provides the gnome system monitor applet (the one which can display cpu load and disk I/O in the tray)?I run XFCE on F14/x64 and would like to display it using the XfApplet.
What i've tried already:
*) Installed the "GNOME Desktop Environment" --> Nothing changed
*) did a yum provides "/usr/lib64/bonobo/servers/*" to check which packages are providing applets - didn't found anything which sounds like the system monitor applet
The XfApplet shows up a bunch of available applets but not the system monitor ...
Suse 11.0 nvidia software repository not working when the updater is run, and it gives an error message which indicates it must be out dated and no longer used. Here is the site in my repository for nvidia; [URL], I did try to add a new nvidia repository site with that Yast tool, but I could not get it to fully work. The new one I did find was as a ftp type, not [URL]. With this older Suse 11.0, and kernel 2.6.25.20-0.7-pae, then is it true that there may not be any more nvidia display driver updates available.? So then I should just remove that nvidia repository from the list, and be okay if the kernel does not update too much newer version, right ?
View 4 Replies View Related
