I'm on OpenSuSE 11.1, and since I needed some features of Firefox 3.5.x I manually updated via 1-Click intall to 3.5.8. Now the Updater-Applet signals a security repo update for FF 3.0.18 which is no longer installed since replaced by the 3.5.8, and I see no way to get rid of the red warning sign; this is very bad since now I get no longer informed about other new updates to really installed packages ....
View 9 RepliesAfter Updating to version 8.0 today...
Package Updater GUI is Failing with the message:
No updates are available
No network connection was detected.
=================================
I did updates almost daily on wheezy
Todays updates [via the Pkg Updater GUI] were over 300 meg.
After the updates and reboot
System was showing version 8.0 in the GUI desktop and using 'cat /etc/debian_version'
Then...
From terminal I did ...
apt-get update
apt-get dist-upgrade
The dist-upgrade was over 40 minute and ~ 500meg
Things seemed to go well.
I updated sources.list with apt-spy.
[In order to trouble-shoot: I subsequently commented-out the apt-spy sources and found some generic sources on internet]
==========================================
# sources.list generated by apt-spy v3.2.2
#
# Generated using:
#
[Code].....
apt-get and Synaptic GUI both work.
I did/reviewed some settings in the Synaptic GUI I imported two v8 signing keys into Synaptic from [URL]
Package Updater GUI is Failing with the message: No updates are available No network connection was detected.
I would like the updater applet to offer updates other than security fixes from the base repos. For example I would like to be notified automatically about updates for VLC and Chrome. How do I do that?
View 8 Replies View Relatedeverytime I run "zypper up -t patch", I get the following:
Code:
Loading repository data...
Reading installed packages...
Resolving package dependencies...
[code]...
Every time I try to update via the software updater it tells me this: Code: glib-4117.noarch conflicts with ndesk-dbus-glib.noarch < 0.4.1-44.3.1 provided by ndesk-dbus-glib-0.4.1-9.1.noarch I cant even ignore the problematic update
View 3 Replies View RelatedI'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
My openSUSE 11.4 adventure continues apace, and is brilliant! However, recently the Gnome 3 Software Updater has begun to show me an update I cannot get and actually I don't think I need. It doesn't turn up when updating via YAST, which is fine, but sometimes the Software Updater is a handy thing, and I don't know why this should appear.
The update is xorg-X11-server - Mesa 4546 noarch. This seems to be for Radeon and RadeonHD cards, of which as an Nvidia user I have neither. Like I say when using YAST there's no sign of it, but it just turns up in the Gnome 3 Software Updater every day. If I try to install it it tells me there are failed dependency resolutions and it doesn't install it. Is there anything I can do to remove this unwanted update from the Gnome 3 updater?
I'm using openSUSE 11.3 with KDE 4.5.4. The updater applet works fine for me, however I think it only checks for updates from the update repo. I tried to modify this behaviour by right clicking the icon and checking "show available updates, when the backend provides it(for experts)" (translation from polish so it may not be 100% accurate) but the behaviour is the same, it only prompts me when there are updates available in the update repo but I would like it also to prompt me when there are updates available in the packman and KDE stable repo. Is it possible to force the updater applet to do this ?
View 3 Replies View RelatedI recently switched my server runlevel to 3 and I don't notice any updating of any kind going on, does the updater run in runlevel 3? If it is possible, how do I do it? Is it a service that I need to start? If so, how?
View 2 Replies View RelatedI have installed a base 5.2 server. I updated the network proxies in preferences and also updated the values for internet access. I can't get the package updater to work. I can use "yum update" and this work but I don't want to update everything. I have allowed a full update and one or more of them is affecting an IOZone test I am running to fiber storage. If I run the test to the base install, it completes OK. If I run the test after all the updates, the test fails with file writes and test files diaappearing. In any case, I would like to use the software updated hoping this will allow me to selectively add the updates.There is about 400 updates that get applied. I am currently getting the 5.3 image and will do and install with that to see if the test runs.
View 3 Replies View RelatedWhen I select package updater for update software it gives an error I am attached my system information & error file.
Error message:-
file /usr/share/emacs/site-lisp/psvn.el from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/de/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/es/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386 .....
I can't make the upgrade..... I've see the dettails and this is what is write: file /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm conflicts between attempted installs of perl-Compress-Zlib-2.015-1.el5.rf.noarch and perl-IO-Compress-2.030-2.el5.rf.noarch file /usr/share/man/man3/Compress::Zlib.3pm.gz conflicts between attempted installs of perl-Compress-Zlib-2.015-1.el5.rf.noarch and perl-IO-Compress-2.030-2.el5.rf.noarch
View 1 Replies View RelatedFor the past several days the Package Updater has popped up wanting me to install an update to iceweasel. Each time I try to do the iceweasel-31.8.0esr-1-deb8u1 (64-bit) I get the following error message:
E: Internal Error, ordering was unable to handle the media swap
Is there something I need to do?
I was working on my flash drive install of Ubuntu, when I squashfsed my /usr. Long story short, I some how ended up with a working /usr, but with a few packages marked as installed, but not having its components installed (emacs). When I try to remove emacs (emacs23-nox), it gives me numerous errors about files (all relating to emacs) not existing (all in /usr). Thus my questions are as follows:
1) Is there a way to force the removal without it caring about missing packages?
-OR-
2) Is there a way to reload which packages are installed by checking which files exist, etc?
-OR-
3) Should I just nuke and re-install?
I am in Fedora 12KDE and just tried "sudo yum update" from terminal because the graphical updater isn't working. I got a list of files to be updated, but in the things it wants to install as dependencies it lists "gnome-menus" and "gnome-packagekit". If I am in the KDE version of Fedora, why am I getting things that require gnome and how do I figure out which things those are to uninstall them? Did I use the wrong command for the update?
View 3 Replies View RelatedHow can I make the security applet stop showing an update for firefox 3.5.9? I have a more recent version installed from mozilla repo: firefox 3.6. The mozilla repo already has a higher priority (95 instead of 99), so I don't know what to do.
View 5 Replies View RelatedI have been having some major issues with the update manager of ubuntu 9.10. I have had 3 instances so far where the updater froze either in the middle of updating or right after, and every time resulted in a corrupted file system. Two times it has happened to me which resulted in once having to completely reinstall and another was luckily saved by using Gparted on the live CD. But now my friend who i installed Ubuntu for has had the same problem. When it happened to me, I was forced to hold the power button to get the computer to turn off as it completely locked up the system. My friend however, was able to use the shutdown menu.
View 2 Replies View RelatedWhile i am using yum update am getting an error: Error: Missing Dependency: libgpod.so.0()(64bit) is needed by package rhythmbox-0.11.6-4.el5.x86_64 (installed).
View 3 Replies View RelatedBefore 2.6.35-23 released this packages is present in the system:
i A linux-headers-2.6.35-22
i A linux-headers-2.6.35-22-generic
i A linux-image-2.6.35-22-generic
But after automatic update to 2.6.35-23 updater install just linux-image-2.6.35-23-generic without headers. In result kernel modules of nVidia driver not compiled and next boot X server can not start.
Now I can install 2.6.35-24 image and headers by hands, but how to explain updater not forget to update headers next time and why this problem occurs?
Bugreport: [URL]
I am running openSUSE 11.4 KDE 4.6.5 on my desktop AMD64. Just added R47 repo in order to upgrade KDE 4.6.5 to 4.7. However, after running zypper up I saw lots of packages not being updated.code...
View 4 Replies View RelatedI have been having a recurring issue for a number of weeks now. Everytime Software Update appears it says there are updates so I click update, enter my root password and then I get this error message:
Subprocess failed. Error: RPM failed: error: package postfix-2.6.1-2.1.i586 is not installed Now that package is not mentioned on the list for me to untick so I have no idea where it's coming from. It happens each time and everytime the updates don't get done. They just stay on the list and new ones keep getting added. The list is getting pritty big now
I have down loaded the .rpm for Xiphos (Bible study software) but it won't install. I get the following message; Package/tmp/xiphos-3.1-3.1 x86_84.suse111.rpm could not be installed. Subprocess failed. Error RPM failed:error Failed dependencies and then gives a list as long as my forearm. Oh, and if you need to see the site it's here: Xiphos -- Open Source Bible Study Software -- Home
View 4 Replies View RelatedWhen an installed package name appears red text in YaST, is it because the repository wasn't kept --- as in one-click remove the repository after install?
View 3 Replies View RelatedI have an application here that has some incompatibilities with java 1.6.0_11 and for this reason I must use java 1.6.0_7.The problem is that everyday the update applet shows me a message telling to update this package.Is there a way to disable the update of this package without removing OpenSUSE Update Repository?
View 6 Replies View RelatedDo I have to update the package manager that comes with OpenSuse before I get all packages?For whatever reason using the live cd I can't find any of apps I am looking for but on packman.org I can find all of them.
View 3 Replies View RelatedI'm looking to use a vnc client so I can connect to my other windows machine. I thought i'd use realVNC as I've used it before from windows and it seems to do the job... the problem is that when I try and install it I get the following message: Package /temp/vnc-4_1_3-x86_linux.rpm could not be installed.
Details: Subprocess failed. Error RPM failed:error: Failed dependencies: libstdc++-libc6.2-2.so.3 is needed by vnc-4.1.3-1.i386
Is it a problem that I'm trying to install this on a 64 bit Suse 11.1 installation? Can anyone recommend a solution (I can't find the package to install), or any other good vnc clients I can easily use?
I'm trying to install HandBrake on my computer and it always comes back with the following: Error Package /home/Josh/Downloads/HandBrake-0.9.4-Fedora_GUI_x86_64.rpm could not be installed
Details:
Subprocess failed. Error: RPM failed: error: Failed dependencies:
libstdc++.so.6(GLIBCXX_3.4.111)(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
libwebkit-1.0.so.2()(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(FileDigests) <= 4.6.0-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(PayloadlsXz) <= 5.2-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
I'm using openSUSE 11.1 64-bit and as far as I can tell I've installed libstdc and libwebkit. I can't find (FileDigests) and (PayloadlsXz). I've searched around and couldn't find much on this.Don't the above errors mean that I do not have those packages installed, or am I just reading this wrong?
put off the updater. I've had several complete system crashes after some updates...
View 4 Replies View RelatedI'v not seen any security or any other updates,including firefox for many months(since January or earlier. Is there anything wrong?
View 9 Replies View RelatedI'm getting this error:
PackageKit Error dep-resolution-failed: patch:mozilla-nspr-5022.noarch conflicts with mozilla-nspr.i586