Ubuntu :: Clock Time Is Wrong At Start-up?

May 30, 2010

Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set. Is there a way to fix this?

View 6 Replies


ADVERTISEMENT

Ubuntu :: Clock Time Is Wrong At Start-up

Mar 22, 2011

Pretty much what the title says. Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set.

View 9 Replies View Related

Fedora :: Clock - Boot Into To 12 Time Is Wrong But Not In Windows

Oct 29, 2009

I'm running windows 7 and the F12 Beta (although the same issue existed in my f11 distro) on an asus g71 bb. When ever I boot into windows my time is correct. If I boot into to F12 my time is wrong. Usually by 4 hours. If I change it in Linux when I boot into windows I end up switching the time on my windows partition. I tried searching the forum (rather casual I'll admit) and couldn't find any solutions.

View 10 Replies View Related

Slackware :: Clock Shows The Wrong Time In Slackware

May 10, 2011

I've been running arch linux, with my clock set to UTC with no problem. Recently I installed slackware on a different partition. During the setup I chose to set my clock to 'local time' instead of UTC by accident. Now in slackware my clock shows the wrong time. Also in arch it shows the same wrong time.

I booted back into slackware and ran pkgtool to enter the setup again, and changed my time to UTC. But this makes no difference. My clock is still wrong in both slackware and arch. Do I need to reboot after changing my clock settings in slackware before it takes effect? how the clock or the setup works.

View 8 Replies View Related

Fedora :: Can't Start Because Last Mountpoint Time Is Wrong

Jan 25, 2011

I noticed today that my F13 date was one month out i.e October 30th instead of September 30th.Time was okay. I tried to adjust it manually but no success. Now if I try to start up I get to the first blue screeen but then it says something like "last mountpoint date was October 30th = now September 30th which is in the future" (not exact wording). Time zone is correct and not set to network time or UTC. I'm dual booting with WinXP and date and time is correct and Time Zone is correct. System time is correct. So now to get into F13 I have to manually set the system time to 30th October.Which is OK for the 1st reboot but reverts back to the correct date on the next reboot. WinXP boots ok.

View 2 Replies View Related

General :: Ubuntu Clock Is Wrong / Can't Change It

Sep 20, 2011

I have a strange problem with my Ubuntu Natty virtual machine running under VirtualBox on OSX.One day last week, my clock on the top bar in Gnome stopped displaying the correct time (I'm not running Unity). I'm on GMT, so right now it should be 9:31, but it's showing 3:31, so I think it's something to do with TimeZones. If I go into the date and time applet, the time is initially wrong but after a second sets itself to the correct GMT Time. The timezone is correclty set as London and it makes no difference if I unlock and set it again or select manual or automatic from internet time.

From a bash prompt, the "date" command shows: "Tue Sep 20 03:33:35 CDT 2011".If I run "sudo dpkg-reconfigure tzdata" I am correctly set as London. Upon exiting the commnand I'm shown the correct London time, but then typing "date" again shows the CDT time again.The clock is correct in OSX. This has been working fine for a month or two - I think it stopped working after an update last week. Any ideas?

View 1 Replies View Related

Ubuntu :: Clock Wrong On Dual Boot System?

Apr 20, 2011

I've set-up dual boot on my laptop. Ubuntu installed first, then Windows 7 so it uses Grub2 to control the booting on start-up. I've noticed that my system clock goes out by an hour on both OS's, I change the clock to correct time & on reboot the time is usually (not always straight away) an hour behind. Has anyone else had this problem & know how to fix it?

View 4 Replies View Related

Fedora :: Clock Gives Wrong Times When Reboot

Aug 24, 2009

So every time I reboot into Fedora11 the clock is wrong.Any idea what might be causing it to keep resetting and what I can do to correct the issue?

View 6 Replies View Related

Ubuntu :: System Time Is Wrong All The Time?

Apr 29, 2011

I installed Ubuntu inside windows(Win 7).Both works good.I found that system time is wrong in both OS.Every time i Change it manually but it changes again on reboot!

View 3 Replies View Related

Ubuntu :: System Clock Will Not Set To Local Time

Aug 15, 2010

Try as I might I cannot seem to get the system clock to display local time. It looks like it's stuck on GMT. In the System>Administration>Time and Date I have my local time zone set correctly and also set to update automatically with an appropriate time server selected. It still displays my local time +5 hours (I'm central time, USA).

View 6 Replies View Related

Ubuntu :: Plasma Clock Not Same As System Time

Feb 16, 2011

I restored my .kde directory after changing some stuff unrelated to my clock and now all plasma clocks are exactly 5 hours faster than my system time (the correct time).I've set the time zone for Date&Time in System Settings properly and that's working well and I've ALSO gone into the time zone settings for the plasma widgets and switched between UTC and Local manually but that doesn't do anything.

View 7 Replies View Related

Fedora :: Cannot Set Time Of Clock

Jul 29, 2009

When installing I perhaps mistakingly told Fedora it should use the BIOS clock and now it shows the wrong time, 1 hour ahead of my time-zone GMT+0. If I try and go to the preferences and set the time the 'Advanced Options' one of which I need are grayed out, I need the 'Use local time source' option to be unchecked. Could somebody tell me a workaround or the command-line commands to tell it not to do this anymore?

View 2 Replies View Related

Ubuntu :: 10.10 Clock Is In Military Time - How To Change The Setting

Nov 6, 2010

In Kubuntu 10.10, the clock is set to military time. I shouldn't have to do the math just to look at the clock. There is no setting anywhere to change it to normal time.

View 8 Replies View Related

Ubuntu :: Clock Applet 2.30.2 Not Updating Time / Solve This?

Dec 7, 2010

I am running Ubuntu 10.04.2 and I've got a problem with the Clock 2.30.2 applet not updating the time.

The only way I can get this to work is after logging on, removing the applet from the panel & the adding it back again. Not really a satisfactory "fix".

View 1 Replies View Related

Ubuntu :: Gnome Clock Applet Shows Time One Second Behind?

Apr 17, 2011

I recently noticed that the time displayed in the Gnome Clock applet is exactly (or nearly so) one second behind NTP time.I have a NTP server on my small network to which I sync my other PCs. Some of the applications I run are critical of time and need sub second accuracy - I am also a bit of Time Nut as well.My NTP server is OK. My PCs can sync to my NTP server OK. My applications which require precise time get the right time from NTP - BUT - the time displayed in the GNOME Clock applet is always behind one second!I have spent much time searching for others with similar problems and their solutions but so far nothing - hence my asking here, why do I see this behaviour and what can I do about it

View 2 Replies View Related

CentOS 5 :: Clock Changes Time Regularly

Mar 19, 2010

I have noticed my system time changes very often. Usually it's only by a minute or two.

If i'm watching date I see things like this :

$ date
Fri Mar 19 12:26:59 EDT 2010
$ date
Fri Mar 19 12:25:23 EDT 2010
$ date

[Code]....

View 3 Replies View Related

Ubuntu :: Won't Gnome Panel Clock Show Local Time / Why Is So?

Sep 30, 2010

When I travel, I would like to tell my laptop that I, as a user, am in a different time zone that what the OS may think is local. And I would like the clock on my desktop (default Gnome bar date/time display) to show the local time.

Instead, I currently have to use sudo and change the system time... (click on the clock, choose time settings, set system time -- there are no other choices given). The applet thing allows me to add other locations, but they only show up if I click on the icon, as extra times below the main one.

Am I missing something? Using the wrong app?

View 9 Replies View Related

Debian :: KDE Desktop Time/clock Settings?

May 18, 2010

Trying to adjust my clock settings!I am running KDE 4.4.3 on Squeeze, on an 64bit laptop.(I used the AMD64 net install version)How can I fix the time settings so it shows 5:00pm instead of 17:00:00So far I have not been able to find a cure

View 3 Replies View Related

Debian :: Clock Keeps Losing Correct Time?

Sep 21, 2010

When I boot into Debian (lenny) my clock is always 4 hours slow. Whether I set it manually, or set it to get it's time from the network, the next time I boot into debian, it's back to being 4 hours slow.

View 14 Replies View Related

Fedora :: Clock - Can't Get Accurate Time On Systems

Jul 7, 2009

I have dual boot on my comp. Windows XP and Fedora 11 Now in both systems time zone is set to Belgrade ( which is my time zone), but when I setup clock in fedora to be, let's say 16.15h, then when I swich to windows it says time is 14.15h. When I setup in windows on 16.15h, and I swich to fedora, it says time is 18.15h. So I can't get accurate time on both systems in no way.

View 6 Replies View Related

Fedora :: 11 Clock Showing Local Time + 2h

Aug 10, 2009

Before my windows clock was at local time + 2h. Now my Win clock is ok but my F11 clock is at local time +2h. What happened?!

View 9 Replies View Related

Fedora :: Show Clock To Civilian Time?

Nov 12, 2009

By default, Fedora 11 sets my clock to military time. For example it says 16:22. I would like it to show civilian time (or at least know how to do it) I logged into the clock settings and had to put in the root password, but couldn't find where you do this. If you scroll on the time for hours, it just goes from 0 to 23 and back, not to AM and PM like some others.

View 7 Replies View Related

OpenSUSE :: Time / Clock Resets - Random On 11.3

Sep 3, 2010

I done searches for "clock" and found similar threads, but no real fix that is working for me. My clock resets when I boot into linux. It does not happen in windows or bios even on cold boots. The battery is replaced and good** the old battery was by all measures dead (0.6v), but still seemed to have enough power for the clock, since windows tested fine with it.

I have tryed setting it to local time, UTC.. etc... My timezone is GMT (london). "sudo /sbin/hwclock --systohc" Although I have windows, I do not use it except the few times to test this, so no conflict.

View 9 Replies View Related

Programming :: Clock() - Calculate How Much Time Does My Program Run?

May 11, 2011

im trying to calculate how much time does my program run, use very simple script

clock_t end, start;
start= clock();
int i;
printf("initial %d
",(int)start);
[Code]....

but it outputs 0 all the time. cant figure out where could be the problem.

View 2 Replies View Related

Programming :: Getting The Clock Time From Inside A Driver?

Oct 21, 2010

I want to use a function that able to get the current clock time when I call it from inside my wireless driver?

View 1 Replies View Related

Ubuntu :: Need To Make System Stop Updating BIOS Clock To UTC Time

Jan 22, 2011

I have Ubuntu 10.04.1 32bit installed on my flash drive so wherever I go I can have my own mini personal computer, but one problem I'm having is every computer it is run on the next time it's rebooted to the OS on the hard drive it has UTC time instead of the actual time for the timezone you're in that Windows uses. So is their a way I can make Ubuntu not automatically change the clock to what it wants?

View 2 Replies View Related

Ubuntu :: Change The Digital Clock Panel Applet To 12 Hour Time?

May 17, 2011

I want to know how to change the Digital Clock panel applet to 12 hour time because the default is 24 hour.

View 4 Replies View Related

Fedora :: Gnome Clock Applet And Epoch Time?

Apr 27, 2010

I'd like to have two gnome clock applets, one with the regular default time and date in the upper right hand corner (the default) and another set to epoch time. However, I can't figure out how to set the second gnome clock applet to display the epoch time. I'm running FC12.

View 4 Replies View Related

Fedora :: Reset The Hardware Clock Each Time When Reboot Into The Other O/S

Sep 1, 2010

Dual boot system. Boot Linux Fedora 13 and the hardware clock is set to GMT. Boot Windows 7, time is wrong, as it expects the hardware clock to be set to the local time. reset the hardware clock each time I reboot in to the other O/S.

View 5 Replies View Related

OpenSUSE Install :: Clock Not Showing Correctly The Time

Jan 12, 2010

I have this problem for a while but didn't notice it until lately(i did reboot the machine for few months). Now that i reboot it frequently i notice that the clock is always not what is supposed to be. I'm in Toronto, Canada so it should be GMT -5:00. Sometimes it shows GMT-6, sometimes -10, now is GMT -11. Anyone would know why i have this issue? I'm running Suse11.1 on a 64 bit. My laptop which runs on 32 bit is working fine.(well probably different versions for kernel and kde.(whatever was in th repository to be updated i updated)

2.6.27.39-0.2-default
Version 4.3.4 (KDE 4.3.4) "release 2"

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved