Ubuntu Multimedia :: Wrong Time Duration After Concatenating Mp3 Files?
Nov 5, 2010
I have the following problem;When I concatenate several mp3 files the time duration is falsely detected by Rhythmbox when I open the newly created mp3 file. VLC Player however detects the correct time duration. I tried two ways of mergen the mp3's and both have the same falsely result. - mp3wrap- catI currently fixed it by opening the mp3 in VLC player and converted it again to a mp3 file which resolved the issue at hand. However this is not a solution I would like to have, nor a answer to what is the cause of the problem.So my question is simple -- what is the issue with the mp3 file and why is Rhythmbox indicating a falsely time duration?
View 3 Replies
ADVERTISEMENT
Aug 8, 2011
I have made a shell script as below to find that how much time is taking between one command to another.
View 3 Replies
View Related
Feb 1, 2011
How to disable the LDAP Users automatically with the specified time duration. For this any configuration file required or else a script need to be written.
View 1 Replies
View Related
Dec 23, 2010
Concatenating two files without creating a newline between them? So how is it possible to do that? I've tried the following:
Code:
echo 123 > file1
echo 456 > file2
cat file2 file2 > file3
[Code]....
View 8 Replies
View Related
Feb 2, 2010
unpacking and putting together files as below:
reception_vol_1.z01
reception_vol_1.z02
reception_vol_1.z03
[code]....
View 6 Replies
View Related
Jan 31, 2010
I just used EasyTAG 2.1.5 under Ubuntu 9.10 to update the tags on my music files running on Rhythmbox 0.12.5, and now Rhythmbox shows that the runtimes (Time) of dozens of my mp3's are now 27:03:11. That means Rhythmbox thinks all those songs are 27 hours, 3 minutes, and 11 seconds long, which they are not. Some are now shown as 54:06:23. So far they are all playing correctly, but the slider at the top of the Rhythmbox window barely moves, making it difficult, if not impossible, to jump to different points in the songs. Nothing else seems to have been affected.
View 1 Replies
View Related
Mar 9, 2011
I have had no problems whatsoever with audio in ubuntu 10.10. Both input and output have worked great, but alas now there's a problem.
I recently installed ardour2 with jack (using apt-get) but for some reason, anytime I start ardour2 (which starts jack implicitly) all audio stops on the whole computer. That is my computer goes silent. As soon as I exit ardour2 audio resumes.
Also, although this will probably resolve itself when I resolve the other problem, when exporting a project to audio file from ardour2 it exports silence for the entire duration, even when ardour2 is exited and audio has resumed.
I'm no linux novice, so I'm not afraid of command line solutions (I prefer them actually) however I know nothing about jack or audio editing in linux whatsoever, so if you could be very specific about jack terminology that would be great.
View 1 Replies
View Related
Oct 22, 2010
On Debian 5.0 I wish record the duration of the dial-up connections. To connect I use Wvdial through Gnome PPP graphic interface. Do you know a program with graphic interface or that it creates a simply log file with for each connection: date-time start connection, date-time end connection, telephone number called?
View 3 Replies
View Related
Apr 29, 2011
I installed Ubuntu inside windows(Win 7).Both works good.I found that system time is wrong in both OS.Every time i Change it manually but it changes again on reboot!
View 3 Replies
View Related
Mar 19, 2011
since the upgrade tzdata (2011c-0ubuntu0.10.04) to 2011d-0ubuntu0.10.04which I installed on Saturday, ntp updates seem to put me in GMT time.I've switched to manual time settings, as it does horrific things to my mythtv database!I'm not sure if its the upgrade, or the ntp time servers. My timezone is Australia/Tasmania.
View 2 Replies
View Related
Dec 30, 2010
I found out that every time I play a file from my Banchee playlist after restarting my computer it won't play. The cure for this is just opening places/ntfs partition.After that it plays the same playlist normaly. But it's anoying having to do this every time..
View 3 Replies
View Related
May 30, 2010
Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set. Is there a way to fix this?
View 6 Replies
View Related
Mar 22, 2011
Pretty much what the title says. Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set.
View 9 Replies
View Related
Feb 14, 2016
When I want copy a file to my Pendrive it take long time, How can I troubleshooting it? For example, It show me 13 seconds to finish but take 20 minutes to finish !!!
View 2 Replies
View Related
Nov 11, 2010
I recently updated my Lucid to Maverick. I am running ubuntu on Lenovo Thinkpad w500. I am facing problems with day light savings. I changed couple times to reflect the correct time. Inspite of my correction, it is still displaying wrong time. Attached is the image of my error.
View 2 Replies
View Related
Jan 6, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code].....
View 9 Replies
View Related
Jan 25, 2011
I noticed today that my F13 date was one month out i.e October 30th instead of September 30th.Time was okay. I tried to adjust it manually but no success. Now if I try to start up I get to the first blue screeen but then it says something like "last mountpoint date was October 30th = now September 30th which is in the future" (not exact wording). Time zone is correct and not set to network time or UTC. I'm dual booting with WinXP and date and time is correct and Time Zone is correct. System time is correct. So now to get into F13 I have to manually set the system time to 30th October.Which is OK for the 1st reboot but reverts back to the correct date on the next reboot. WinXP boots ok.
View 2 Replies
View Related
Jan 2, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code]....
View 1 Replies
View Related
Mar 30, 2011
when I installed Ubuntu 9.10 I put in one time setting but it was wrong, and now I don't know where to change it. I tried to change the time preferences, but on reboot I am back to the wrong time.
I know the data is in there somewhere and I can change if I knew where it was.
View 3 Replies
View Related
Oct 29, 2009
I'm running windows 7 and the F12 Beta (although the same issue existed in my f11 distro) on an asus g71 bb. When ever I boot into windows my time is correct. If I boot into to F12 my time is wrong. Usually by 4 hours. If I change it in Linux when I boot into windows I end up switching the time on my windows partition. I tried searching the forum (rather casual I'll admit) and couldn't find any solutions.
View 10 Replies
View Related
Feb 22, 2009
I have this server that runs Tomcat . this server sends mail with localhost as MTAthe local MTA is sendmail (with the default settings) . from time to time i have this strange thing and the emails it sends never reach the destination. the log shows it left the server , but looking at the logi see that the time on the log is wrong . sometime its correct and ometines its +2 hours. i guess this email are bounced at the destinationfor sending at future time . all this email that didnt reach the destination have this in common
Feb 22 15:47:44 BE00 sendmail[12969]: n1MDlikZ012969: from=<support@example.com>, size=5912, class=0, nrcpts=1,
msgid=<5269969.391235310464949.JavaMail.tomcat@BE00.example.com>, proto=ESMTP, daemon=MTA,
[code]....
View 3 Replies
View Related
Oct 18, 2010
I have a function that take char* I call this function in an array, and I need to pass the following:-i+" binomial" to be like "2 binomial" or whatever value of i value (i is an integer) it is pretty easy to be done in java, but how to concatenate an integer with a string and get char* or string to pass to a new function.If you missed me i just need to get the following :string =integer + string
View 5 Replies
View Related
Nov 15, 2010
System time was drifting ahead increasingly for several days time in the end. This is what I did with the clock about 6 hours "in the future":
Quote:
sntp -P no -r pool.ntp.org
hwclock --systohc
i.e. I got the (more or less) exact time from the time server and set the hardware / BIOS timer with this value.I renamed "/etc/adjtime" to beginn with a clean slate. During reboot (shut down phase) I noticed a message saying something like: "hwclock set to system time". I checked in the BIOS and there was a new time about one hour early(!). The boot phase then reset the time again, this time several hours forward (usually two to six hours). This is an iterating process, with a net gain of several hours per boot. It is not always whole hours -- like in a time zone error but it involves also minutes. System is set to UTC as affirmed by the "date" command. What could be the cause of this behaviour of the clock / timer?
View 14 Replies
View Related
Jan 14, 2010
I just backup my mysql db using mysqldump. I run it around 6pm of the evening but I just notice that on the last part of the dump file, it says "Dump completed on 2010-01-14 11:30:01". The time is "Jan 14 19:30" when I run mysqldump. Though the content is corrent, I still want to know why the dump reported it was completed but wrong time. I don't have my.cnf on my /etc so it means all was default by mysql. If I'm not mistaken, timezone by default in mysql is gmt.
My /etc/sysconfig/clock is
ZONE="Asia/Manila"
UTC=true
ARC=false
When I do "select now();" on mysql shell, it was the same with my system. I want to prove my backup was right but this thing confuse me a bit.
View 1 Replies
View Related
Jan 18, 2011
I have a program that loops over each word in a sentence. I need to append a constant to the beginning and end of each word. It works up until the last word on the line.
Code:
Output:
View 4 Replies
View Related
Nov 26, 2010
For like windows you can resore your os to a state of peace kind of. If you messed up your vital files you could go back in time and restore you computer to a selected time. I was wondering if you could do that for ubuntu
View 4 Replies
View Related
Jun 19, 2011
Under a Linux shell, how can I change the creation time of all a folder's files to the current time?
View 2 Replies
View Related
Mar 7, 2010
There are many time zone files accessible from the command line that don'thow up in the GUI ("system-config-time"). How do I add these time zones to the GUI
View 1 Replies
View Related
May 7, 2010
I recently did a fresh install of 10.04 and am experiencing a really weird issue. I right click on an audio file (in my case an MP3) and pull up the properties. I select the Audio tab and look at the duration for the file. All of my file (which play just fine) are showing a zero duration. Is this a known bug and is there a fix for this somewhere?
I should note that these are all valid MP3 files, with duration time previously showing under a 9.10 install.
View 3 Replies
View Related
Jun 8, 2011
Is it possible to set how quickly the notifications in KDE4's notifications widget will disappear? They stick around a couple of seconds too long for my taste.
View 9 Replies
View Related
