Fedora :: No Login Box After Update To 2.6.34.6-47.fc13.x86_64 And Above?
Sep 20, 2010
Recently I upgraded my kernel to 2.6.34.6-47.fc13.x86_64 and then also did an update to 2.6.34.6-47.fc13.x86_64. Both of these kernels I do not get a login dialogue box. I still have the one kernel that works and it is 2.6.33.8-149.fc13.x86_64. The system I am on has a Radeon graphics card, but I don't think the graphics card is the issue since I get the login screen's background, but not the login screen itself. <Later> After messing around with this for a while I came to the conclusion that livna-config-display was messing with the xorg.conf file. Removed it and things seem to be working fine now.
View 1 Replies
ADVERTISEMENT
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Jun 8, 2010
Code:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
View 4 Replies
View Related
Aug 14, 2010
I am now using Fedora 13 x86_64. Firefox can display Japanese and Chinese correctly. But all java applications cannot display Asian characters, they all show small rectangles in input boxes, in tip snippets, etc. But openoffice can show Asian characters slowly in its document area. The problem happens in both GUI application and applets. I didn't use text java application.
View 1 Replies
View Related
Oct 28, 2010
I just installled Fedora Core 13 for IA64
I installed to disk from the LIVE CD namely
Fedora-13-x86_64-Live.iso
After it was installed and rebooted everything worked fine EXCEPT that yum did not have any repositories!
Can anyone with a successfully working yum on FC13 IA64 please post the contents of /etc/yum/yum.repos.d
View 14 Replies
View Related
Jun 19, 2010
This has been happening for over a week and is preventing me from installing updates, They all download OK then as they start to install I get this error message. Test Transaction Errors: package nss-softokn-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-3.12.4-17.fc13.i686) is already installed Then the update fails and I am unable to continue.
I am a complete noob with this OS, I left for a week in the hope it would sort it's self out.
View 3 Replies
View Related
Mar 16, 2010
Yesterday I applied the su security patch to my openSuSE 11.2 x86_64 system.After applying the patch, any attempt at su failed, and after rebooting the system earlier this morning any login (root, user, otherwise) fails with a "Permission Denied".Is it possible that the su update somehow messed up my (standard) pam settings?
View 10 Replies
View Related
Sep 30, 2010
I have been running FC13 for some time now without any problems on my HP dc5800 Microtower. Recently I ran a software update, and when I rebooted the machine I got a blank screen with only a blinking underscore in the upper-left corner. Rebooted several times to no avail. I thought perhaps I had made a mistake, so I just reinstalled. I have tried reinstalling several times now with both 32-bit and 64-bit FC13, each time with the same result: everything works fine up until I install software updates; then after the next reboot I get a blank screen with the blinking underscore. I see the POST screen, and then it just goes blank. It doesn't seem to respond to any keyboard/mouse input; I eventually have to hold down the power button to make it power off.
View 5 Replies
View Related
Dec 20, 2010
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
View 5 Replies
View Related
Jan 5, 2011
Just installed fresh FC14. I built/installed a project with some new man-pages. I'd like to update the apropos/man database. makewhatis was still present in FC13.
View 6 Replies
View Related
Jul 4, 2010
An a stable FC13 system, after resolving deps and downloading rpms, 'yum update' aborts with this single error message:Transaction Check Error:installing package kernel-PAE-2.6.33.5-124.fc13.i686 needs 801KB on the /boot filesystem.Silly thing is, I have at least 52MB available on /boot.An important datapoint is that I resized the boot partition since the initial install from 64MB to 128MB, which makes me think perhaps yum or anaconda recorded the original partition size, and is not looking at the current (correct) size of /boot.
View 2 Replies
View Related
Jul 10, 2010
Googled this and found the same problem mentioned in the yum site:
[root@plouton ~]# yum update kernel
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.6-147.fc13 set to be installed
--> Finished Dependency Resolution
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.4-95.fc13 set to be erased
--> Finished Dependency Resolution
Dependencies Resolved
View 4 Replies
View Related
Dec 1, 2009
I tried to update my f12 today. In the list it showed an update for kernel-2.6.31.6-145.fc12.x86_64 It all seemed to go OK but when I restated my computer it spit up an error and wouldn't boot"Could not load /lib/modules/2.6.31.6-145.f12.x86_64/modules.dep: No such file or directory"Luckily the old kernel still works.
I do have the disk encryption set, could this be related to that? Updated my laptop today with the xx.6-145.f12.PAE kernel and now it's borked to. Same problems.12/07/2009OK today's kernel update seemedto fix the problems and now all is well, execpt for my inkscape not working problem. But I put ubuntu 9.10 in a VBox and it works. So for now that's my work around.
View 14 Replies
View Related
May 31, 2009
Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]
View 2 Replies
View Related
Oct 21, 2010
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
View 3 Replies
View Related
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download.
It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same. I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall issue.
[Code]...
View 2 Replies
View Related
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download. It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same.
I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall
[Code]...
View 4 Replies
View Related
Sep 10, 2009
This morning I had the notification that there were 21 updates available, and I selected to install them. The system then notified me that a restart was required and I clicked the restart button. After restarting, the system boots to the GUI screen and I select my name and enter the password. It then plays the login sound, the cursor "swirls" and it cycles back to the login screen. Switching over to another terminal screen I can login from the command line.
View 14 Replies
View Related
Oct 20, 2009
I did a 'yum update' in fc11 and later I am not able to login. When I click on my user name, it says 'unable to authenticate user' without even entering any password. stuck with this problem for quite some time. I am a newbie to linux.
View 7 Replies
View Related
Nov 7, 2010
i've installed opensuse 11.3 x86_64 and everything works great. after install updates and restart i cannot access internet from wireless connection. Knetworkmanager says it is connected, i have a dhcp ip, gateway, and cannot access internet.... i tried to configure from yast and cannot access internet...
View 3 Replies
View Related
Nov 10, 2009
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
View 8 Replies
View Related
Sep 13, 2009
Yesterday, I updated my system with the latest security update and other software updates. Following the update, I am not able to log into the system after restart.As usual, I was prompted with the login page which looks as per normal. I chose my login id and entered my password. It brings me briefly to my desktop showing only my wallpaper (without any upper and bottom taskbars/panels). Then the screen went blank and the login page appeared again.I entered the login id and password, was shown the desktop wallpaper, screen went blank and the login page appeared. This continues over and over and over. After multiple tries and with some luck, I am able to log in as per normal.What seems to be the problem?
1. How do I check the system for errors?
2. How do I check which update has been updated?
3. Is there any way for me to restore to its original state (I migrated from FC10 to FC11 via yum update)?
The only other change apart from the security update is that I installed wine - which has been uninstalled the moment I was able to re-logged in.I attach the details of my grub.conf file below which I hope could be of some useful info.
View 14 Replies
View Related
Aug 9, 2010
I am unable to login following an update, Fedora 13. The screen splashes after crond is loaded. The GUI does not come-up. In text mode i can't login as root or other user accounts except in kernel 1. I can access some files via FTP command. Is the password file corrupt ?
View 14 Replies
View Related
Dec 14, 2010
I'm not able to login after system update tonight. whenever I try to login, the screen goes black briefly and it automatically logs off.
I tried both kernel, 2.6.35.6-64.fc14.x86-64 and 2.6.35.6-45.fc14.x86-64, but failed.
View 10 Replies
View Related
Feb 12, 2011
after update i can not longer see the splash login gui screen but i can only see the log in terminal... works ok but how can I enable the gui login
View 9 Replies
View Related
May 9, 2011
I have a problem with my Fedora 14, only on Fedora 15. Been out of my home for a week, when I arrived home and turned the PC on first thing I made was the update, as usual. But when I reboot or shutdown the PC and when I go to do login, the Fedora get's stuck and doesn't show me the login window to insert my login. Made a clean install and it worked fine, until I made the last updates and it became again, stuck before the login window appears. Is there any update making this? What could be? It must be some update, because when I made the clean install it worked fine, and with the first update also worked fine.
View 2 Replies
View Related
Aug 27, 2011
I was trying to update software and it told me to log out and login again. When I tried to login it told that there is a problem and I need to log out and to login again and it kept repeating the message and fedora is not working at all and before that it wasn't working right it kept suspending without reason and each time I turn the laptop off from the power button.
View 4 Replies
View Related
Aug 3, 2010
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
View 5 Replies
View Related
May 10, 2011
While i am using yum update am getting an error: Error: Missing Dependency: libgpod.so.0()(64bit) is needed by package rhythmbox-0.11.6-4.el5.x86_64 (installed).
View 3 Replies
View Related
Jun 6, 2010
I just installed FC13.It wiped out everything from the previous (FC11) installation. I cannot connect to the existing windows network that was working before. I don't see SAMBA so I downloaded and installed the RPM. I still don't see it on any of the menus. I am trying to connect to the existing Windows network
View 6 Replies
View Related
