Last nigth I upgrade my system to squeeze and it whent well except for grub-pc and udev. If i try to upgrade now udev will not install do to problems with the kernel version and grub-pc can't seem to find the boot image.
[Code].....
I've done the ordinary sources.list update (lenny to squeeze) and Code: sudo apt-get update sudo apt-get install dpkg apt aptitude.sudo aptitude full-upgrade However, udev failed to install, and I used..Code: touch /etc/udev/kernel-upgrade and did full-upgrade again. Everything was going fine, I went through several package configurations and suddenly, after 30-40 minutes of "Unpacking Setting up." I just heard two system beeps and got an error similar to a kernel panic. The SYSRQs did nothing. Did a hard reboot.I got two kernels in GRUB now. + the GRUB2 chainloading option. Used this one and got Code: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block It's all the same with the 2.6.32-5-686 kernel kernel panic. Using the older kernel didn't fail on the boot up, but showed many UDEV related errors and logging in was impossible - all I get were segmentation faults. Forgot to mention it - my FS is Reiserfs
View 7 Replies View Relatedyesterday I updated my squeeze amd64 on my Phenom X4 and now it is not booting anymore. Have you experienced the same problem?
After that I noticed the shutdown was not working anymore, it just restarted instead of powering down. This morning it wouldn't boot squeeze anymore, when grub starts and prints "Welcome to grub" (or something like that) the list of operating systems is not shown.
I noticed the updated also included grub and I saw it correctly detected my operating systems.
I am planning to boot knoppix soon and try to reinstall grub from chroot, but currently I am at work.
I've had a problem trying to hibernate, sleep doesn't work either, when I try it starts to hibernate but then the screen flashes and when I move the mouse I'm returned to my current X session. I see the following in dmesg
PM: Device usb10 failed to freeze: error -2
[ 682.481822] sd 0:0:0:0: [sda] Starting disk
[ 682.798713] Restarting tasks ... done.
Apparently this notation points to a USB root hub, I have a USB 3 capable MB and I saw few mailing lists suggesting this was a bug but I can't find a fix, anyone out there resolved this?
cat /proc/version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP
I have trouble setting up NFS on Debian Squeeze (2.6.32-5-kirkwood armv5tel GNU/Linux) running on a Sheevaplug. After some digging and googling I found that the NFS server is (probably) not properly installed.
no rules in iptables or hosts.allow or hosts.deny. Fresh OS install.
apt-get install --reinstall nfs-kernel-server
generates this output:
Setting up nfs-kernel-server (1:1.2.2-4) ...
Stopping NFS kernel daemon: mountd nfsd.
Unexporting directories for NFS kernel daemon....
Exporting directories for NFS kernel daemon....
[Code]....
It could be related to this bug [URL] but I wonder if the fix goes to the arm-branch as well?
I have never had any trouble setting up NFS before.
I have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies View RelatedI'm hoping someone can help me. I upgraded my server from Lenny to Squeeze this afternoon following the release notes at http://www.debian.org I had no issues and everything is still running. I then installed Sqeeze via the Net Install disc into a virtual machine for some testing. Once the install was complete I found that apt was not working. It turned out the sources file was blank. I manually added the official repos and did an update. There were no new packages for installation.
Now, after a reboot, I get the Grub error:
error: ELF header smaller than expected
Entering rescue mode...
grub rescue>
I have no idea why this happened because I've not changed grub, just played around with apt. Has anybody any idea why apt had a blank sources file and grub is now failing?
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI recently did an update squeeze and the next day after I restarted there was only a blank screen.The laptop started, the system installed, the wifi connected but no gdm.I started in recovery mode and tried;
# invoke-rc.d gdm start, and got the response that it was an invalid command or words similar to that.
# startx, gives me a blank screen with an unblinking cursor.
# apt-get install gnome, tells me that the latest version is already installed.
If it has any bearing on the issue, I dual boot with Ubuntu and that works fine.Is there anything to be done to fix the problem?
I installed squeeze with 2 drives, one for squeeze (2.6.32-3-amd64 using 120GB hdd), and one for my old winxp. I used LVM with ext4 on /root, /home, and ext2 for /boot. The install gave me grub 1.98.
When booted, screen says
Loading Grub
Welcome to Grub
I decided to upgrade to Squeeze from Etch.
not upgrade, but moving from etch to squeeze.
Clean new install. Format disks, re-partition...etc.
All goes perfectly well, until I reboot into my newly installed Squeeze.
After the messages from the bios motherboard, there is a black screen with a flashing cursor, and nothing else happens. Now it should have been the GRUB coming up and asking which system to boot into. But there is nothing at all on my screen.
I thought I've done something wrong during install, so I formated the disks again, and re-installed squeeze again. Just paying close attention to every message, before I went further.
And AGAIN, when rebooting into the system, there is nothing on the screen.
I run into a problem when trying to update from lenny to squeeze. Seems that util-linux fails to install due to some error and that this causes xorg as well as udev to fail. If this is the case then it might be a bug in the post-installation script for util-linux..Am I on the right track or is it completely wrong?
View 5 Replies View RelatedI am running a lenny server. So I don't have physical access.How can I upgrade to Squeeze without everything breaking? Also, I want to use "apt-get", not "aptitude".
View 8 Replies View RelatedI just upgraded to Debian Squeeze (from Lenny) and there are several errors occuring.
The first one is that whenever I want to use mplayer it gives me the following output:
Maybe that has to do with faulty drivers, I'm not sure yet.
What's bugging me a little bit more is whenever I start a shell like konsole or xterm it displays the following:
It roughly translates to:
A third problem is when I try to use something like mplayer or java and then try the tab completion I get yet another error.
Which would be:
So I get "bash: _get_comp_words_by_ref: command not found", however it's not like that with all of my applications. Tab completion after the command "vlc" for example works just fine.
I have a Debian Lenny LAN Gateway machine running shorewall, squid and a source install of ossec in the opt dir. The machine is an Intel Atom based asus hummingbird with no gui. It works well and has been very stable so far. However, i am considering upgrading to Squeeze. Is it feasible to attempt to upgrade this machine, or am i realistically looking at a reinstall and reconfigure with Debian Squeeze over a long weeked?
View 2 Replies View RelatedI installed a Debian server a few time ago, with the Squeeze version.
Now I want to upgrade it to Jessie, but all related documentation only talk about the procedures to upgrade from Wheezy to Jessie.
What should I do? Upgrade first Squeeze to Wheezy and after that to Jessie, or I can upgrade from Squeeze to Jessie?
Now when new stable debian is squeeze I was wondering how do I apply updates to my lenny distro?I just want to apply all updates available for lenny, but DO NOT WANT to upgrade my lenny to squeeze.
View 1 Replies View RelatedI live in Swizterland and am using a Swiss mirror.I want to upgrade my Lenny installation to Squeeze
View 6 Replies View RelatedI have an offline machine and the full 8 DVD repository set and have added them to the system and they work fine to install packages. I used jigdo to download the update 6.0.1 DVD and the "packages" file and the one inside of "packages.gz" are empty files. This prevents the disk from working at all. I'm not sure who to report this to.
View 4 Replies View RelatedSince upgrading my laptop to Squeeze, terminals (tested Gnome terminal and xterm) show simply a "$" prompt; machine, path and username are missing. What's really annoying though is that tab completion doesn't work, it inserts a tab character instead. Fooling around showed me that typing in the command "bash" brings everything back to what I'm used to. So in my dire newbiness do I ask, how do I reenable bash as the default shell for these programs?
View 5 Replies View Relatedwhen I tried to upgrade my computer from Lenny to Squeeze and it downloaded everything but it's stuck at installing udev which it said it couldn't do on the 2.6.26 kernel. I then did update-grub and Squeeze's 2.6.32 kernel was seen (on grub). I have grub-legacy chainloading (if I'm not mistaken) but I don't have grub2 installed. When I try to boot through the 2.6.32 kernel so that I can complete the upgrade (that is to install udev and have everything working fine), instead of reaching the OS, it says something along the lines of "kernel panick not syncing vfs" and something about "root(hd1,0)".
View 10 Replies View RelatedI've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround
View 3 Replies View RelatedI'm currently using Debian Lenny 5.0.7 and I tryed to upgrade to Squeeze. I followed the instructions from Debian's Guide:
1. I changed my repositories to squeeze in sources.list
2. # aptitude update
3. # aptitude install apt aptitude dpkg
4. # aptitude safe-upgrade
After this last command, the computer kept working for about 7 hours, it consumed 2 gb RAM and 1 gb swap, and in the end aborted with the following message:
I searched around and I found out that this error is somehow related to C/C++ package compilation, but I found nothing specific related to Debian's upgrade.
When I had Lenny installed I made this computer be my alarm clock (with sanduhr) to wake me up for school in addition to my mom's TV (because I am a heavy sleeper) and now I cannot use this computer to do so. I'm not saying it's a bug. I'm just asking, how do I enable it again? I know that with Lenny to enable/disable beeping, I went to System=>Preferences=>Sound but now I don't see how to make beeping work again.
View 11 Replies View RelatedI am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
View 14 Replies View RelatedI have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
View 6 Replies View RelatedA week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.
After upgrading to squeeze I have now X Server 1.7.7 installed and it won't start.
When I try to run startx script, monitor gets blank for few seconds and then I get back to command prompt and no errors is displayed.
When I try the same as root, system locks up with blank screen and no functioning keyboard.
Initially I had kernel 2.6.28 which worked fine with earlier Lenny's X Server and Matrox P650 AGP video card. After upgrade I found, that Matrox P650 is not longer supported in new xorg and I swapped it to Matrox G550 AGP card.
Tried mga driver's many options, upgraded to kernel 2.6.37.2, tried with Matrox G200 PCI and Savage 4 Pro AGP card but without a success.
With kernel AGP support turned on I got both with Matrox G550 and Savage card an MTRR error: "error setting MTRR, Invalid argument (22)". Without AGP support in kernel, Matrox G550 gets initialised as PCI card and no errors and X still not working. Same with Matrox G200 PCI card.
With vesa driver the behavior is also the same and output at the end of Xorg.log file is almost the same.
So I understand, that this is some X server problem?
Nothing special in xorg.conf file and tried without it also.
End of the Xorg.0.log file:
>>
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
[Code].....
Finally ran the upgrade from lenny to squeeze and ran into a few issues. I have to admit this is the first dist-upgrade I've ever had go this badly (kernel issues, xorg issues, mysql transition problems, mythtv... Yikes!).Anyway, the first problem I'm trying to fix is getting dpkg to like the new squeeze kernel. Here's the errors
Code:
Errors were encountered while processing:
linux-image-2.6.32-5-686
[code]....