Fedora :: Kernel 2.6.31.6-145.f12.x86_64 Update Wont Boot?
Dec 1, 2009
I tried to update my f12 today. In the list it showed an update for kernel-2.6.31.6-145.fc12.x86_64 It all seemed to go OK but when I restated my computer it spit up an error and wouldn't boot"Could not load /lib/modules/2.6.31.6-145.f12.x86_64/modules.dep: No such file or directory"Luckily the old kernel still works.
I do have the disk encryption set, could this be related to that? Updated my laptop today with the xx.6-145.f12.PAE kernel and now it's borked to. Same problems.12/07/2009OK today's kernel update seemedto fix the problems and now all is well, execpt for my inkscape not working problem. But I put ubuntu 9.10 in a VBox and it works. So for now that's my work around.
View 14 Replies
ADVERTISEMENT
May 31, 2009
Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]
View 2 Replies
View Related
Dec 7, 2010
I have just updated my kernel and immediately struck trouble. The kernel update is marked as security update.
When booting I get a multiple warnings " deprecated config file /etc/modprobe...", then "no root device found" followed by "boot has failed, sleeping forever"!Clearly something is amiss with this update, so figured the best thing might be to remove it and wait on a fix, but attempting to remove the kernel via the package manager would cause a whole lot of other packages to be removed as well.Instead, I edited grub.conf, commenting out all the kernel-2.6.34.7-63 lines, so that the default is now the previous kernel (2.6.34.7-61).
View 14 Replies
View Related
Jul 13, 2009
I'm I seeing this wrong or is the initrd file in kernel-2.6.27.25-170.2.72.fc10.x86_64 a zero byte file and that's why I can't boot with it( get this "kernel panic not syncing VFS unable to mount root fs on known -block (0,0)" message)
View 2 Replies
View Related
Jul 14, 2009
I just updated my kernel to kernel-2.6.29.5-191.fc11.x86_64 on my x64 system, after I reboot my machine, the Fedora loading bar comes up and finishes but then no gui comes up. I attempt to issue commands at the hanging prompt that comes up but nothing happens. I can boot into my older kernel just fine but not the updated one.
What can I do?
View 3 Replies
View Related
Aug 10, 2009
The girlfriend did an update a few nights ago. Besides removing her NVidia drivers, it also installed kernel version 2.6.27.29-170.2.78.fc10.i686.
That kernel was causing problems. Now it won't boot at all. How do we remove that kernel altogether?
If we remove it, would simply doing another update from the previous (still working) kernel just try to reinstall that bad kernel?
View 12 Replies
View Related
Jan 21, 2010
I've run today command: "sudo yum update"
and I've noticed that the new kermel have been installed (2.6.31.12-174.2.3.fc12.x86_64).
After that installation .. my camputer has several errors while booting and it doesn't want to start. So while booting I can see Code...
View 7 Replies
View Related
Aug 4, 2010
I ran the update through yum (replicated results twice) and whenever I boot to the new kernel it either freezes on the F logo or screen goes black right after f logo. No commands work whatsoever (tried em all). I can boot to an older kernel (2.6.33.3-85.fc13.x86_64). the ones that fail are: 2.6.33.6-147.fc13.x86_64 and 2.6.33.6-147.2.4.fc13.x86_64.
The Fedora error system gave me a bug report I submitted, here's what I got:
Package: kernel
Latest Crash:Tue 03 Aug 2010 09:46:33 PM
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 00000000000005b8
Bug Reports:Kernel oops report was uploaded
View 14 Replies
View Related
Nov 15, 2010
After updating my kernel from 2.6.34.7-56.fc13.i686 to 2.6.34.7-61.fc13.i686 I can't boot anymore. The error message says: "No root device found Boot has failed, sleeping forever."
I'm booting from 2.6.34.7-56.fc13.i686 now but I would like to sort this thing out. What should I do? File a bug? I never did that, so I don't know where to go.
View 5 Replies
View Related
Dec 19, 2010
After running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies
View Related
Aug 23, 2009
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
View 2 Replies
View Related
Feb 11, 2011
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
View 14 Replies
View Related
Apr 12, 2011
Hello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies
View Related
Jun 16, 2011
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
View 4 Replies
View Related
Jul 12, 2011
I have just updated my kernel to version 2.6.38.8-35 in Fedora 15, it now refuses to boot that kernel. I just get a lot of text on the screen and nothing happens. I can ctrl-alt-fn to get to a prompt, but I do not know how to fix the nvidia problem.
When I edit Xorg.conf and replace 'nvidia' with 'nv' the new kernel boots but only to fallback mode, trying to then re-install the nvidia drivers shows them to be already installed and I can get no further.
View 13 Replies
View Related
Mar 14, 2010
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
View 9 Replies
View Related
Nov 26, 2009
It appears that I have really messed up my machine. I was trying to get matlab working on FC 11 and I ran into libc.so.6 issues, so I put an older file libc.2.3.1.so in /lib/tls/ directory and created a symbolic link libc.so.6 to see if the application would work. Unfortunately at the same time the system did some updates and the system hung, so I ended up rebooting, but now it gets stuck at boot screen (after grub) with a kernel panic - not syncing: attempted to kill init.I just need a way to get to the directror /lib/tls and delete the link and the older .so file I threw in there. How do I get this accomplished. I cannot get even to a shell from the boot screen.
View 3 Replies
View Related
Jul 19, 2010
Since doing the update which included kernel "2.6.32.16-141 fc12-i686 PAE" I can no longer boot into my usual 1280x960 desktop. I can set it using NVidia settings but even though this offers to modify xorg.conf it fails to do so. I have tried running as root and it doesn't then give an error message but when I look at xorg. conf there is no section.showing any specific screen size. It worked ok before the update. In case it is relevant the video card is a Quadro FX1400 with KDE. Also the whole program seems rather unstable since the update.
View 10 Replies
View Related
Sep 4, 2010
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
View 8 Replies
View Related
Mar 24, 2010
I'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
View 3 Replies
View Related
Feb 23, 2010
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
View 4 Replies
View Related
Dec 3, 2009
The latest update changed the default boot from 0 to 1 and added extra parameters to the new kernel boot line.
default=1
timeout=8
splashimage=(hd0,7)/boot/grub/splash.xpm.gz
# hiddenmenu
title Fedora (2.6.31.6-145.fc12.x86_64)
root (hd0,7)
[Code]...
View 1 Replies
View Related
Dec 29, 2009
I have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
View 6 Replies
View Related
Apr 12, 2011
I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:
[Code]...
View 4 Replies
View Related
Jul 19, 2011
In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
View 11 Replies
View Related
Sep 20, 2010
Recently I upgraded my kernel to 2.6.34.6-47.fc13.x86_64 and then also did an update to 2.6.34.6-47.fc13.x86_64. Both of these kernels I do not get a login dialogue box. I still have the one kernel that works and it is 2.6.33.8-149.fc13.x86_64. The system I am on has a Radeon graphics card, but I don't think the graphics card is the issue since I get the login screen's background, but not the login screen itself. <Later> After messing around with this for a while I came to the conclusion that livna-config-display was messing with the xorg.conf file. Removed it and things seem to be working fine now.
View 1 Replies
View Related
Jun 16, 2011
I generally check what updates are being installed. This time sadly I didn't and again this kernel had one missing module. VirtualBox-OSE stopped working. It had been working fine with other upgrades. No it's not a problem with dkms or other stuff. This kernel doesn't have vboxdrv module like other kernels...i verified it...
[Code]...
The 2.6.38.8 version doesn't have vboxdrv module!....hence again I have to roll back to older kernel. So before blindly upgrading....read this message!
View 10 Replies
View Related
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Dec 31, 2008
I have the following strange thing with a RHEL4 installation. Since last week, the system did a reboot and now something is really fucked up. During boot we get the following messages (don't care about 'strange' typo's, my colleague typed it 'blind' from the screen)
Code:
The strange thing is that we never see a 'could not mount blabla' or similar messages. First we thought it was a failing kernel update by plesk, but even after manually updating the kernel with RHN RPM's, still the same message. Booting with rescue mode and then chroot the system works. After that we even can start things like plesk and so on.
We double checked things with another RHEL4 install, and at least two things were odd:
1: the working machine has /dev/dm-0 and /dev/dm-1, the broken one doesn't
2: some files on /dev didn't have group root, but 252
We tried to recreate the /dev/dm-X nodes with [vgmknodes -v], output:
Code:
A fdisk /dev/sda shows: /dev/sda2 XX XXX XXXXX Linux LVM (I removed the numbers because this line is from another machine, but rest was identical)
We have a copy of the boot partition so if one need more info please let me know.
grub.conf:
Code:
last part of init extracted from initrd-2.6.9-78.0.8.ELsmp.img:
Code:
View 3 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
