Logging in on web I get a popup with Mozilla icon. Message headed "Password Required" with underneath "Please enter the master password for the Software Security Device". I have hunted everywhere and am unable to find anything relating to this. The message an be cancelled and one can log in but password cannot be saved.
View 3 RepliesIs it possible somehow to block some bluetooth device with specif address (mac) ?
(like iptables block by mac)?
I tried to do 'srm', 'wipe', 'shred'... whatever terminal commands to securely wipe a '/dev/sdc' (USB flash device) but it says that the device is read-only. How should I go about securely wiping it ?
View 2 Replies View RelatedI managed to make an old parallel port scanner work in ubuntu 11.04 with SANE. Everything's perfect but one thing: scanner applications work only if they are executed as a root.After further researching, I've found the cause is that only the root has read and write permissions on the device /dev/parport0 which is my parallel port. If I set the right permissions giving sudo chmod a+rw /dev/parport0 I solve my problem, but just untill next reboot... the system resets root only permissions at each restart. I would like to make that change permanent... what can I do?
View 6 Replies View RelatedIf I forward port 5764 to port 80 to my VOIP device, I can nmap and get a proper connection. If I forward port 5764 to port 22 to my server, it comes up filtered. It even happens if I try forwarding port 80 to my server. So I'm sure it has something to do with my server, but I'm not sure.Here's my Linksys iptables:
Code:
:wanin - [0:0]
-A FORWARD -i vlan1 -j wanin
[code]....
Anyone running fedora 11 have any luck getting a smart card reader added as a security device under firefox?
Specifically from firefox: Edit-Preferences-Advanced-Encryption tab-Security_Devices-Load;
Enter arbitrary name and "/usr/lib64/libcoolkeypk11.so" as the module.
This worked fine in fedora10 and was the necessary step to getting a card reader to work with firefox. In fedora11 (with firefox beta) the browser just comes back with nothing, it doesn't even respond. Note I am familiar with the concept of pki and certificates as well as certutil, pkcs11_inspect, pklogin_finder, etc. Also note utlities like pkcs11_inspect and pklogin_finder and esc all work and communicate with the reader and read the contents of the card but smart card login configured via the authentication applet (as working in fedora 10) is not working either.
Has anyone ever built a dvr type video recording device for security purposes? With multiple cameras recording?
View 1 Replies View RelatedAnyone know how device-mapper works, or can someone point me to any docco (other than the man page)?
Couple years ago I wrote a TrueCrypt wrapper script for use on Puppy Linux, and am reworking it for Ubuntu. Puppy sometimes didn't have the 'dmsetup' device-mapper utility available, but TrueCrypt still works without this when the '-m nokernelcrypto' option is used.
My script notices when dmsetup is available and skips this option. When the TC volume gets mounted (somehow using dmsetup), the Desktop icon is labled with the leaf name of the /media/mount_point -- so far, so good.
However, if I force the script to add the no-kernel-crypto option, and the TC volume is mounted without using dmsetup, the Desktop icon ls labled with the size of the volume. Say what?
Running df shows the difference between the two mounts is whether /dev/mapper is used. So *how is* dmsetup making this happen? The manpage isn't much help. Is it just the 'rename' sub-command? I am unable to find any details about this mechanism.
Code:
Suse 11.4 32bit. Formerly when I plugged in the first USB device it would be identified as /dev/sdb, my primary SATA drive being /dev/sda. The second USB device as /dev/sdc and so on. That has now changed so that the first USB device is /dev/sdc, second one /dev/sdd etc. This causes havoc with several backup scripts. How can I revert to previous assignments?
View 6 Replies View RelatedI am trying to install a 11.3 virtual machine through Xen on a 11.3 installation. I am trying to install from the opensuse DVD. I get to this point, setting up everything (I can only do paravirtualization) Then the DVD spins for a little while and after that I am returned this error message "device 0 vif could not be connected opensuse....."
I tried a bunch of different settings in the previous screen and I always end up with this error I googled around and it seem to be a problem in different distros but I could not spot a solution at all
Flash is having really trouble in firefox, it works in chrome on the other hand.You can see the large white boxes that randomly appear while flash plays.Thunderbird's lightning fails to install and gives this error.
System Spec's
OpenSuse 11.4 64bit
Intel i3 CPU and Graphic's
4 GB of ram
Webcam (working)
[code]....
(works some times, doesn't seem to load right but that might have something to do with the fact that is shows under lsusb. I need to learn how to reset a usb device)
In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
Got an external harddisk and when inserting it into my desktop running openSUSE 11.2, dolphin will recognise it as /media/testing. Wanted to rename the device label from "testing" to "Backup". Googled and understand the way to do it is to issue this command e2label device new_label Mounting the external harddisk and issuing the above command returns
e2label: Is a directory while trying to open /media/testing/
Couldn't find valid filesystem superblock. Without mounting the external harddisk and issuing the above command returns
e2label: No such file or directory while trying to open /media/testing/
Couldn't find valid filesystem superblock. The command lsusb returns Bus 001 Device 005: ID 1058:1010 Western Digital Technologies, Inc. How can I figure out the device name (/dev/sdx) of this external harddisk?
I'm trying to mount my NAS device via NFS with suse 11.1, but up to now it failed. The NAS does support NFS, but it requires a UID and a user name and up to now I could not figure out the correct nfs mount options for that.
If I just make mount 192.168.0.2:/nas1 /mnt a get the error message "mount.nfs: access denied by server while mounting 192.168.0.2:/nas1". So can somebody please tell me the correct options for user name and user id which the mount should use. And, preferable the correct entry for the etc/fstab file to make this mount being executed automatically during startup. I studied the mount(8) and nfs manpages several times, but I do still have no idea how to make it.
Still getting the "cdrecord has no permission to open the device" error when trying to burn an iso image to a DVD-RW.
I did yet another clean install of openSUSE 11.2 64 on my desktop computer, did updates, added Nvidia and Packman repos (it's not a repo problem as I tried it several times on a totally clean install), added codecs and stuff as advised by caf.
I updated the DVD drive firmware earlier today.
My user is a member of ALL groups.
Drive is an LG GH22NSS50 (sata)
It all works (with the same DVD-RW) under winxp on the same machine.
Is it HAL or something else that blocks permission to devices?
I'm really getting sick to death of this problem, and would be happy just to get rid of anything blocking permissions to the DVD drive.
I did a fresh install of 11.2 (giving OpenSUSE a try after being on Ubuntu for years). I then enabled the community and packman repos. Now, I have noticed that the eject button that normally appears on the Device Notifier plasmoid is gone. I can still click on where that button should be and the device (CD in this case) will still eject. It's just that the button is "invisible."
View 2 Replies View RelatedI am having problems with my touchpad on my dv7 notebook, that I can not resolve... so I thought it would be a good idea to update the gpointing-device-settings that came with the opensuse 11.3 repositories (version 1.3.1-1.2 too old maybe)
So I downloaded the source files but when I try to ./configure, I have some errors telling my that my gtk+ and gnome-settings-daemon versions are older (that is not true, I check them and they are newer)
Here is the ./configure output:
Code:
damususe:/home/sebadamus/Downloads/gpointing-device-settings-1.5.1 # ls
aclocal.m4 configure libgpointing-device-settings.pc.in modules
autogen.sh configure.ac ltmain.sh NEWS
ChangeLog COPYING m4 po
[Code]....
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables GNOME_SETTINGS_DAEMON_CFLAGS
and GNOME_SETTINGS_DAEMON_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
damususe:/home/sebadamus/Downloads/gpointing-device-settings-1.5.1 #
I know that there is support for this, but i can't seem to find any appropriate tools. Let's say my widget is at 192.168.1.111; i need to open a terminal window talking to it. Then i can control the things connected to it (it is a bus converter). oS 11.1, KDE 3.5, various machines.
View 2 Replies View RelatedIm running suse 11.4 on my laptop, everything was ok, this morning, I've attached two or three usb flashes to my laptop and mounted them by device notifer but after an hour, I've attached another usb flash and device notifer stopped working for any usb device or cd/dvd rom actions... (I mean that it doesnt shows ant action, completely emotionless! ) all of them are mountable by command line.
and after that my dolphin places, doesent shows removeable devices and other partitions enymore (so i couldnt mount any partion using gui)
There are so many system information tools i figure that this one would be in the set. I just can't seen to find it.
View 9 Replies View RelatedI'm using OpenSuse 11.4 (x86_64) with KDE 4.
It's not possible to mount external USB (ntfs) disks with a non-root user using the Device Notifier or Dolphin. The error is:
Could not mount the following device: MyBook 2
org.freedesktop.UDisks.Error.PermissionDenied: Authentication is required
It is a permission problem; running Dolphin under root and clicking the USB disk mounts it without problems. The same should be possible to an ordinary user. The Update Applet does not work for the same reason (I can only install updates using yast).
Of course, I googled the error and there were a number of possible solutions, which I all tried. That includes allowing the action in the policy and adding the user in AdminIdentities local-authority. The file /usr/share/polkit-1/actions/org.freedesktop.udisks.policy contains "yes" for every option. Needless to say it doesn't make sense and I'm out of options.
OpenSuse 11.4 32bit KDE 4.6.0
When I plug in my 8 GB SanDisk Cruzer USB stick into my desktop box, the KDE Device Notifier fails to recognize it. It will recognize every other USB stick. "fsck" reports no errors. I can mount it manually. I can read and write to it. The Device Notifier on my netbook recognizes it. So does another desktop box. By the way this started recently so I suspect some software update.
this weekend I updated the OS on my laptop from OS 10.3 to 11.2.Most things worked fine ... and quickly ... but I have issues with some USB devices.Printers and everthing that works like a Memory Stick, HD (camera, mobile phone) are OK. But after the update to 11.2 I can neither use my scanner anymore nor my Garmin GPS device. Both devices are listed with 'lsusb' correctly. But applications are not able to find/access them.
For the GPS device I do not know how to do more tests. The application (gpsman) that worked fine with 10.3 does not find it anymore. The Scanner is detected by Xsane or Skanlite and also the driver can be installed with Yast when plugged in. But a test fails with "sane_start: Error during Device I/O". 'sane-find-scanner' also lists the device correctly. As a normal user it complains that there is no write access for usblib to the usb device. As root this error does not appear. It can be avoided temporarily by setting chmod 777 to all /dev/bus/usb entries. Then 'sane-find-scanner' does not show any errors.
But the applications do not work.
I already added the normal user to the "lp" group as shown in the /etc/udev/rules.d/55-libsane.rules and tried to give access to the usb-devices in /etc/fstab .... all without success. As I have two USB devices (Scanner, GPS) that worked fine with 10.3 but are not an external HD (or similar), I assume that someting has changed with the handling of USB devices from 10.3 to 11.2.
I have a vaio vpcf12jfx/b. I got just about everything working except for my touchpad. Its an Alps Point Device.
View 2 Replies View RelatedI need to capture from my webcam. It has a mic too.I can specify video input device as /dev/video0.I specified input audio device as /dev/dsp2 ( OSS device, corresponding to USB Webcam), Now VLC throws an error, "VLC is unable to open the MRL 'alsa:///dev/dsp2'. Check the log for details".Thinking it wants an alsa device, I specify device as /dev/snd/pcmC2D0c. (got it from kinfocenter and dolphin). Now again an error, "VLC is unable to open the MRL 'alsa:///dev/snd/pcmC2D0c'. Check the log for details.".I try with any device, the same error. I have added myself to audio device so that I can read/write to the mentioned devices.I see no way of switching VLC to use OSS. And I see no information (documentation on net) on it's expected device listing for audio.
View 5 Replies View RelatedNCP Mount worked fine in Open Suse 11.2, but fails in 11.3
Using the same script, but after upgrade I just get this error...
ncpmount: No such device in mount(2)
I cannot seem to create a tun device using ifconfig, even though the module is loaded, and the node tun is present in /dev/net and appears to have correct access permissions, trying to use nstx which requires the tun device. Only thing I can think of is adding an alias, but not sure where, since there is no /etc/modprobe.conf or /etc/modules.conf in SUSE 11.3.
View 2 Replies View RelatedI have a vaio vpcf12jfx/b. I installed OpenSuse 11.3 and got just about everything working except for my touchpad. Its an Alps Point Device.
View 5 Replies View RelatedI am currently using opensuse 11.2 with kde 4.3.1. I am having a problem when I connect my samsung R450. It will not mount or show up as a usable device in either Dolphin, Amarok, or on the device notifier. I have tried manually mounting but I get an error saying it cannot find such device. I did not have any issues using it in 11.1 with KDE 4.2. It is being recognized by my system, but not allowing it to show up as a storage device or being mounted.
output of dmesg:
PHP Code:
output of lsusb:
PHP Code:
When I shut of the usb mass storage on the samsung R450 it switches to modem and is properly detected and usable as modem by my system.I don't have any other problems with other usb devices, such as a digital camera or flash drives, so I don't know if I just missing a system setting or configuring something wrong.
How do you find out which driver is being used for a certain device. Say that I run lsusb and I find "Bus 007 Device 002: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse", how can I find out what the active driver for the device is?Also, is there some way to list all available drivers for a device? Is there a way to change the driver at runtime?
View 1 Replies View Related