OpenSUSE :: How To Reset A Usb Device
Mar 19, 2011
Flash is having really trouble in firefox, it works in chrome on the other hand.You can see the large white boxes that randomly appear while flash plays.Thunderbird's lightning fails to install and gives this error.
System Spec's
OpenSuse 11.4 64bit
Intel i3 CPU and Graphic's
4 GB of ram
Webcam (working)
[code]....
(works some times, doesn't seem to load right but that might have something to do with the fact that is shows under lsusb. I need to learn how to reset a usb device)
View 1 Replies
ADVERTISEMENT
Jan 24, 2010
All I do is connect my Palm to the usb port, and it starts a reset loop. It resets, gets booted, and crashes to reset again. What's up with this? BTW, this same palm worked with gnome pilot on Debian and Vector installs, and works currently with an XP install. But on my 11.2 suse, it goes crazy.
View 9 Replies
View Related
Aug 6, 2010
I was able to write a script on Linux Shell for send and read data to a serial port. But I�m facing a problem now. If by any mean I send to de device anything else than the predefined strings, stated by the manufacturer, the device ceases to respond. The only way I found its to turn off and then turn on the thing again. Which its very impractical. Its there any way to "reset de UART chip on the device" or send some string based on the RS232 standard that clean the device buffer?
View 2 Replies
View Related
Nov 11, 2010
I recently added a SS drive and after 2 hours it went into read only and busy mode. The machine see the drive as does tools like fdisk, fsck, qtparted, kde partition manager but I can't reset the device to make it write-able Do I need to RMA the device (it's 12 hours old) or is there a method to make the device usable again?
View 4 Replies
View Related
Apr 13, 2010
I noticed there're lots of "usb 3-1: reset low speed USB device using uhci_hcd and address 2" warnings in two of our server's syslog. They occur roughly every 20min. The server is a Dell R710 with CentOS 5.4 X86_64 installed. I suspect it's the virtual CD device of the iDrac6 but not sure. How Can I identify which USB device triggering these warning? The related syslog is as following:
Code:
Apr 13 23:32:47 bak2 kernel: usb 3-1: reset low speed USB device using uhci_hcd and address 2
Apr 13 23:42:44 bak2 kernel: usb 2-3: USB disconnect, address 3
Apr 13 23:45:53 bak2 kernel: usb 2-3: new high speed USB device using ehci_hcd and address 4
[code]....
View 2 Replies
View Related
May 3, 2010
On karmic the audio input device would constantly reset to muted. On lucid, it keeps resetting it to the microphone jack at the back of the computer (While I have a webcam up and running that it knows is what I use. How can I get it to remember my audio input? One more functionality issue till bingo. How can I give a window "Widget" status: I want it not to minimize when I hit ctrl alt D (Like conky and other widgets).
View 1 Replies
View Related
Jul 12, 2011
is this normal to see in dmesg multiple times after booting (screenshot)
Code:
lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 2 Replies
View Related
Sep 23, 2009
I have 4 Dell R200's with Seagate 2x250Gb drives running software raid on CentOS 5.2 kernal 2.6.18-92.1.13.el5. They all get these errors 5-10 times a day and when the errors occure the servers apear to freeze and drop all network connections, very frustrating. I've updated to smartmontools 1:5.38-2.el5 and confirmed with Seagate that I have the latest drive firmware, and am now at a loss as to how to fix this. All of the systems report the problem only on sda not sdb.
[code]...
View 9 Replies
View Related
Jun 3, 2011
I'm unable to reset using either the reset option in gnome shell or the command using a terminal. When I select it the shell exits and displays the graphic "exploding" and then it just sits there. Shutdown works fine; just no reset. Any ideas? I've installed from the DVD. I booted the live CD and it resets just fine so I know it's no my hardware
View 1 Replies
View Related
Jan 17, 2010
1. I have messed up KDE desktop on SUSE 11.2. I have installed Gnome and XFce desktops. I can happily work in Xfce (best on my old machine) or Gnome.
2. However...I want to re-set KDE to original with desktop folder and bottom bar. How to do it?
3. KDE works ok, Full desktop files downloaded. it is just a messed up desktop no desktop folder no bottom bar. A widgit of a bar to log out and get menu has been set up to work in KDE.?
View 9 Replies
View Related
Mar 10, 2011
I'm wondering how to reset the gnome desktop.i.e. the task bar and everything is molested, etc. etc.I've seen some posts with a shell command for this, however would you thinkits resettable to default via the gui in gnome?
View 3 Replies
View Related
Jun 17, 2010
I installed opensuse yesterday, but I don't remember the keyring password, and even if I know the WEP key by heart, it's boring to retype it. How can I reset the default password? I tried Keyring menu, dell all keyrings and created a new call "default", but it stills asking me the password, that is different that the new.
View 2 Replies
View Related
Jul 4, 2011
every now and then, one of my customers forgets his windows user password, and asks me to reset it. till now i used a small windows app called "Password Renew for NT" from a windows PE bootdisk, but i want to have an alternative that runs on my opensuse 11.4 box, so i can connect the windows hard drive on it and reset the password from suse.
I found and the program "chntpw" in the build service, but it seems on beta status. And most information i found of it is very outdated. Has anyone used it? does it work ok on all modern windows versions (xp, vista and 7)? any other alternatives you can recomend?
View 6 Replies
View Related
May 20, 2011
I had a machine with 11.3, and tested 11.4 live CD. It looked good, network worked and so did compiz. But then I installed, and I can't see any wireless networks, the screen flickers and compis doesn't work. Is there any way to simple reset all settings so that they become the live-cd settings?
View 4 Replies
View Related
Mar 18, 2010
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
View 9 Replies
View Related
Dec 17, 2010
I'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
View 3 Replies
View Related
May 6, 2009
I'm new to Linux, tried Ubuntu, had slow boot problems, tried openSUSE 11.1, still have slow boot problems. The issue seems to be that the ata.0 device is slow to respond (ERROR= -16), the boot system forces a hard reset, then a soft reset, configures for UDMA 133, says the drive is ready, then does it again, three times, and then configures the drive for UDMA 100. It's a brand new Western Digital Caviar drive, and windowsXP likes it just fine. Once SUSE boots, everything seems to work just fine. I thought the problem might be with the drive jumpers, so I reset them from cable detect to master/single. No change in the problem.
View 9 Replies
View Related
Sep 8, 2010
I installed Open Suse 11.3 LXDE from the live CD I downloaded. My monitor settings reset to the highest resolution on every shutdown/reboot. Other settings like my wallpaper and removing the lock screen on screensaver also reset.
Is this there anything I can do to get settings/changes I make to stay?
View 2 Replies
View Related
Nov 4, 2010
This is just a nit, but I have noticed that whenever the kernel is updated, the background picture that I have set up for the login screen seems to be reset to "default_blue". No other setting seems to be disturbed.
After each update, I have to go into Configure Desktop->Login manager and set my background picture again. Why is this happening? Is there a way to fix this?
I am running Suse 11.3, KDE v4.4.4.
View 4 Replies
View Related
Nov 15, 2010
I have an existing OpenSuse 11.3 (64 bit) box serving a couple of websites. I would like to enable Xen. Question - If I install Xen through Yast, will my existing configurations be reset and will I loose my existing data? Does Xen have to be installed on a clean system?
View 3 Replies
View Related
Aug 20, 2010
I have a lot of RAR files and ISO. Is there a program like Winrar which could open them in Linux? Cause now it only opens zip files . Also I would like to know what the best package manager is (I mean the easiest -used to use the Software Manager in Mint 9 Xfce).At last I would like to know if there is a good program to make disk images to reset the system.
View 9 Replies
View Related
May 28, 2010
I have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies
View Related
Dec 26, 2010
I've been trying to get multiple monitors going on my laptop (thru the HDMI port) and did fairly well, but the ribbon/panel/whatever (at the bottom of the screen with launcher, etc.) is now gone and I can't find it (even with zoom-out). At first it was only gone when I disconnected the external monitor, but was present when both monitors were attached. Now it's always gone. Is there a magic reset-the-desktop to default (without reinstall) command?
HP dv7t-4000, ATI5650HD, 8GB, OpenSuSE11.3x86_64 + KDE
View 6 Replies
View Related
Jul 19, 2010
I upgraded from 11.2 to 11.3 and works great except two problems.
1. it was installed on Thinkpad W500, and its sleep mode doesn't work, the computer cannot wake up from sleep mode.
2. After a hard reset due to stuck at sleep mode, the KDE network manager couldn't find any network interface anymore, even I tired to disable and enable "user Controlled with NetworkManager in Network Settings, still same problem. it always say "network management disabled" regardless the network manager checkbox status in Network Settings. On the other hand, Traditional Method with ifup can detect the my wireless and ethernet ports and work under ifup method.
so does anyone has idea about
1. how to configure the sleep mode for laptop?
2. how to bring back the network manager again? (I have "user controlled with network manager" checked in network settings.
View 3 Replies
View Related
Jun 9, 2011
Suse 11.4 32bit. Formerly when I plugged in the first USB device it would be identified as /dev/sdb, my primary SATA drive being /dev/sda. The second USB device as /dev/sdc and so on. That has now changed so that the first USB device is /dev/sdc, second one /dev/sdd etc. This causes havoc with several backup scripts. How can I revert to previous assignments?
View 6 Replies
View Related
Jan 10, 2011
I am trying to install a 11.3 virtual machine through Xen on a 11.3 installation. I am trying to install from the opensuse DVD. I get to this point, setting up everything (I can only do paravirtualization) Then the DVD spins for a little while and after that I am returned this error message "device 0 vif could not be connected opensuse....."
I tried a bunch of different settings in the previous screen and I always end up with this error I googled around and it seem to be a problem in different distros but I could not spot a solution at all
View 9 Replies
View Related
Dec 8, 2010
In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
View 7 Replies
View Related
Aug 16, 2011
Logging in on web I get a popup with Mozilla icon. Message headed "Password Required" with underneath "Please enter the master password for the Software Security Device". I have hunted everywhere and am unable to find anything relating to this. The message an be cancelled and one can log in but password cannot be saved.
View 3 Replies
View Related
Dec 17, 2009
Got an external harddisk and when inserting it into my desktop running openSUSE 11.2, dolphin will recognise it as /media/testing. Wanted to rename the device label from "testing" to "Backup". Googled and understand the way to do it is to issue this command e2label device new_label Mounting the external harddisk and issuing the above command returns
e2label: Is a directory while trying to open /media/testing/
Couldn't find valid filesystem superblock. Without mounting the external harddisk and issuing the above command returns
e2label: No such file or directory while trying to open /media/testing/
Couldn't find valid filesystem superblock. The command lsusb returns Bus 001 Device 005: ID 1058:1010 Western Digital Technologies, Inc. How can I figure out the device name (/dev/sdx) of this external harddisk?
View 2 Replies
View Related
Jan 30, 2010
I'm trying to mount my NAS device via NFS with suse 11.1, but up to now it failed. The NAS does support NFS, but it requires a UID and a user name and up to now I could not figure out the correct nfs mount options for that.
If I just make mount 192.168.0.2:/nas1 /mnt a get the error message "mount.nfs: access denied by server while mounting 192.168.0.2:/nas1". So can somebody please tell me the correct options for user name and user id which the mount should use. And, preferable the correct entry for the etc/fstab file to make this mount being executed automatically during startup. I studied the mount(8) and nfs manpages several times, but I do still have no idea how to make it.
View 9 Replies
View Related
