OpenSUSE :: SMTP Server Doesn't Support Authentication?
Aug 14, 2010
I just dowm loaded and installed 11.3 openSuse I set up Kmail but when I tried to send it says Your SMTP server does not support authentication. The server responded: "5.5.1 command unrecognized" The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. The following transport was used: Charter.net I did set up the email correctl
View 1 Replies
ADVERTISEMENT
Apr 14, 2010
CentOS: 5.4
Exim: 4.63
I want to setup Exim to only allow sending mail from the localhost and externally with Plain authentication. I know I should use TLS but not all software supports TLS, I want Exim to use its own userpass file not the local system. I have spent a few days trying to get this setup, so far I have followed this: [URL].... But unsure what to change to remove the need for TLS.
[code]....
View 2 Replies
View Related
Feb 25, 2011
I tried setting up evolution mail incoming worked fine outgoing Big No, so I install Thunderbird and it worked like a charm. Then I decided I liked Evolution a little more and wanted to see if I could get it working and came across this. Firstly I entered all my details correctly double and triple checked. Look at my user name now when i try sending an email I get this? Why has my email changed?
View 5 Replies
View Related
Jun 2, 2009
mutt-1.5.16-36 on opensuse 10.3 lacks SMTP support as shown in mutt -v ("-USE_SMTP"). Does anyone know which version of mutt would have it for opensuse 10.3 and where can I download it from? I don't want to compile from source or use an external program.
View 3 Replies
View Related
Nov 3, 2010
I have one Centos Server and I want to forward root mail to 1 external account: [URL] I installed sendmail and created /root/.forward with this content: [URL] and I sent a test mail with this command: /usr/sbin/sendmail root <prueba.txt But nothing was forwarded.
After that I ran the same command with the verbose option:
/usr/sbin/sendmail -v root <prueba.txt
And this is the output:
root... Connecting to [127.0.0.1] via relay...
220 localhost.localdomain ESMTP Sendmail 8.13.8/8.13.8; Wed, 3 Nov 2010 21:09:39 -0600
>>> EHLO localhost.localdomain
250-localhost.localdomain Hello myfriend [127.0.0.1], pleased to meet you
250-ENHANCEDSTATUSCODES
[code]....
For some reason sendmail tried to connect to example.com smtp server and couldn't reach it. I am sure this is because the smtp server for example.com domain is not example.com is mail.example.com. Besides mail.example.com requires authentication, username , password and the smtp port is not the default 25 is 9999. configure sendmail to forward root mail to a smtp server that requires authentication, username, password with a not the default 25 port?
View 4 Replies
View Related
Sep 20, 2010
I have searched through piles of postfix and sendmail documentation but I'm not sure of the terminology to describe what I want to do so I'm never sure what solutions are workable. Null client, relay hosts. What I have already is a RHEL postfix server which sends and receives email. What I want to do is add a second postfix server to the network. The second server should accept only ssl smtp mail and forward it on to the main postfix server. Users shouldn't use it for normal internal sending/receiving. It's only to allow me to support ssl smtp from people working out of the office without messing about with the main postfix server. I thought a Null Client sounded likely but I don't think it will accept mail. Is it a relay host I'm trying to configure? Any pointers on configuring something to just accept secure smtp and forward?
View 1 Replies
View Related
Feb 26, 2010
I followed this How To (https://help.ubuntu.com/community/Postfix) in order to add smtp authentication to my Postfix installation used as spam filter for my exhange server, and it'seem all ok; the only thing that I don't understand is where I list all the users (with passwords) that I authorize to send mail through my server...
View 3 Replies
View Related
Apr 28, 2010
I have a dedicated server running CentOS 5, Plesk 9.2.2, SMTP Postfix and Courier-IMAP.The issue I have is that on all domains on the server receiving email works fine however sending email never seems to work. This is from email programs, my phone, webmail and PHP. None of them seem to be able to send email. If it is of worth Spam Assassin is running however I don't feel it is causing any problems.
View 7 Replies
View Related
Jun 3, 2011
I installed exim4 package on my debian server as MTA. Now I want to send mail with this by SMTP. But when I connect to this via telnet, it returns this banner:
Code:
220 *******************************************************
And when I try to execute a command like EHLO, it says:
Code:
500 unrecognized command
View 7 Replies
View Related
Aug 3, 2010
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
View 1 Replies
View Related
Nov 27, 2008
I have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies
View Related
Oct 28, 2010
The php mail form is designed using post function,normally the mails are not getting delivered without smtp authentication.So can someone say me on adding smtp authentication to php email form.
View 9 Replies
View Related
Dec 22, 2010
I need to send authenticated mails from a RHEL machine to a relay that only accepts authentication mails from domain users. I've never done this so I'm a bit lost. I read some sendmail docs and I uncommented these optins in sendmail.mc file
define(`confAUTH_OPTIONS', `A p')dnl
...
TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
and then regenerated the /etc/mail/sendmail.cf file and restarted senmaild, and started saslauth service. Still I can't send an e-mail.
View 4 Replies
View Related
Aug 5, 2010
I'm working on configuring a mail server on Ubuntu 8.04 using Postfix 2.5.1 and Courier 0.59.0. I don't want to have to open up specific networks for SMTP relaying, so I want my server to require authenticated SMTP sessions. I'm just confused on how to do this. Here's my main.cf file from Postfix:
[Code]...
It seems like getting this enabled is way more complicated than I expected, assuming I'm not on the wrong path.
View 7 Replies
View Related
Mar 18, 2011
I have postfix installed on my computer to let scripts send email. I want to use my isp as the smtp server. In /etc/postfix/main.cf I have told postfix to use gmail as my smtp server using "relayhost = outgoing.verizon.net". However, when I send an email, it gets returned. The full email is included below (my server's address has been replaced with ***.com).
[code]...
I believe that I need to authenticate to [URL]... from postfix, but I am not sure how to add these directives to the config file.
View 1 Replies
View Related
Jan 31, 2010
In order to have greater control over the emails sent out the company I imagined the following scenario.ScenarioDescribing in words what I need.ser sends an email to user@hotmail.com for example, using the smtp of my isp (is the internet).Before the email is sent, the firewall checks if the recipient is blocked transparent, if you are locked out rejects the email.I searched several forums and mailing lists, but did not find scenarios similar to mine.Where found situations in which the mail servers were internally in the company, which is not my case.
View 2 Replies
View Related
Jun 19, 2010
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies
View Related
Sep 20, 2010
I'm trying to set up a tool that emails me periodically (in my case, psad). It allows by default to define just a destination email for reports. Is there a general way to get this or similar tools to use a non-default SMTP server, with TLS? (e.g. gmail's SMTP)
View 1 Replies
View Related
May 19, 2010
I installed nullmailer on our server so we can push mails out using an external mail server.However getting the following messages in syslog
Code:
May 19 22:55:04 <hostname> nullmailer[12435]: Rescanning queue.
May 19 22:55:04 <hostname> nullmailer[12435]: Starting delivery: protocol: smtp host:
[code]....
View 2 Replies
View Related
Mar 10, 2011
I was wondering that if its possible to send mail using my own localhost mail server, I guess I made the settings using yast2. I am not sure that I did right setup. And if I did setup my mail server correctly.
View 1 Replies
View Related
Jan 23, 2010
I am trying to setup a vpn client for my iphone since it doesn't support openvpn. However I keep running into this error message: initial Main Mode message received on <local ip>:500 but no connection has been authorized with policy=PSK.
View 3 Replies
View Related
Feb 27, 2010
I have got an old print server Axis 150. It does not support TCP/IP I know that there was a thread about this print server [URL].... but I didn't found answer to "how to bring it up" there.
View 5 Replies
View Related
Mar 12, 2011
i just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 6 Replies
View Related
Nov 8, 2010
I have only just got my first netbook and when I first installed 11.2 on it it would detect local networks and ask if I wanted to use any of them. Since they belonged to other people and I use a wired connection at home, I declined. I then took my netbook on travels and tried to connect to freely available networks there, but to my surprise it no longer detected them. I tried to go through YAsT and see what needs to be changed but no matter what I tried the wireless option was never offered again.
I have now come back and decided to get to the bottom of this. Here is what I get from iwlist scan:lo Interface doesn't support scanning eth0 Interface doesn't support scanning.It is as if there has never been a wireless capability. Can anyone advise on what to do to fix this?
View 9 Replies
View Related
May 1, 2010
I have installed phpldapadmin 1.2.0.5 Using commands in shell I have added two users and some groups into a base (ldif-file) and I see them in phpldapadmin. But when I try to add users or groups by using graphical interface (phpldapadmin) I can't do this correctly because I can't to select a type of new entry and I see a tip "classes of objects from XML does not support LDAP-server". So I can't to create a new entry by using graphical interface. Here is my slapd.conf
[code]...
View 3 Replies
View Related
Aug 2, 2010
I have been faithfully following the postfix/sasl/etc install docs from [URL] and seem to have hit a minor snag with SASL authentication for SMTP. KMail cryptically leaves me with a generic auth fail notice and tailing the mail logs gives me
[Code]...
View 2 Replies
View Related
Mar 14, 2011
i'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
View 4 Replies
View Related
Aug 11, 2011
I have installed open suse 11.4, gnome but no luck with wireless settings so far. kernel version is iwl3945 here is stuff that i did but it says "scan is deprecated"
linux-1f6k:/home/rajbanul # dmesg | grep firmware
[ 7.249018] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[code].....
View 3 Replies
View Related
Apr 6, 2011
is that my isp's smtp service is very poorso i want to configure my own smtp servr for my internal clients only for sending emails not receivingi have static ip on my router with 25 port forward i have configure sendmail on linux its working fine on local network mean its sending email on local domainnow i want to send emails on other external domains with my public ipMean user of mydomain.com should be able to send emails on all internet domains like yahoo.com, hotmail.com etc
View 8 Replies
View Related
Mar 12, 2010
I have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
View 1 Replies
View Related