I am trying to setup a vpn client for my iphone since it doesn't support openvpn. However I keep running into this error message: initial Main Mode message received on <local ip>:500 but no connection has been authorized with policy=PSK.
View 3 RepliesI'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.
what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedI want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
Will there be eventually iphone support for example with banshee?There is no linux iTunes.
View 4 Replies View RelatedI just dowm loaded and installed 11.3 openSuse I set up Kmail but when I tried to send it says Your SMTP server does not support authentication. The server responded: "5.5.1 command unrecognized" The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. The following transport was used: Charter.net I did set up the email correctl
View 1 Replies View RelatedI have got an old print server Axis 150. It does not support TCP/IP I know that there was a thread about this print server [URL].... but I didn't found answer to "how to bring it up" there.
View 5 Replies View RelatedI just noticed the iFuse project, which aims to create fuse support for iPod Touch and iPhone. I also found an openSuse repository from which to download it, but I'm not too sure if I know how to use it. Any hints on how to test fuse mounts?
View 3 Replies View RelatedI have installed phpldapadmin 1.2.0.5 Using commands in shell I have added two users and some groups into a base (ldif-file) and I see them in phpldapadmin. But when I try to add users or groups by using graphical interface (phpldapadmin) I can't do this correctly because I can't to select a type of new entry and I see a tip "classes of objects from XML does not support LDAP-server". So I can't to create a new entry by using graphical interface. Here is my slapd.conf
[code]...
I'm having some trouble using my iPhone 3Gs with Ubuntu--specifically, Ubuntu doesn't seem to be detecting when I connect the phone at all. I don't have a password on the phone, so that shouldn't be causing the problem, and a friend of mine who also uses Ubuntu (same version) has been able to connect my phone to his computer.
View 1 Replies View RelatedI have an iPhone 3GS with Firmware 3.1.3 and I'd like to sync the music over rhythmbox in lucid (64bit).
The phone does mount in nautilus and I can also mount it with ifuse to use it witz gtkpod. However it does not show up (it only blinks and disappears) in the list at the left in rhythmbox though I have MTP and iPod Plugins enabled.
I thought I'd ask after having waited several weeks and none of the gvfsd updates changed anything
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies View Relatedmy problem is following: I'm running a bridged OpenVPN on my Debian. If the service is running, everything works fine: local and Internet, ftp, mailing from in and outside etc. But, when stopping OpenVPN, sending mails from inside (LAN) fails: I cannot reach smtp (postfix) listening on port 465. And even reaching mailboxes using IMAP gets horribly slow eg. in Thunderbird. Here is my firewall.sh script.
Quote:
#!/bin/sh
echo "
IPTABLES FIREWALL inicializalasa - szures"
# Enter the designation for the Internal Interface's
INTIF="eth0"
[Code].....
This is on Lucid, using a Dell Mini. I installed the required packages for a USB tether to my iPhone. Network Manager recognized it immediately as wwan0, but it doesn't connect. Also, it never asks me for the password to connect to the Personal Hotspot (as it does when I can connect from Windows).
View 3 Replies View RelatedJust had to re-install after I did some very silly things. Running 9.10 Ubuntu with XBMC-live Have gnome desktop, Firefox with adobe flash plugin. I set up a script called myvpn to run openvpn and this used to work and now it doesn't I did
[Code]...
If I manually type in each command it works, but the script doesn't?
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies View Relatedi have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
i have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
i just one to emulate the windows 2003 - windows XP easy VPN deployment, with my ubuntu server.I got my server side (ubuntu) and client side ( openVPN gui) and everything looks okbut now, i cant make a //server/SHARED and get from my house to the office's docs, despite the conection its ok... whats wrong?
View 14 Replies View RelatedWe're setting up an OpenVPN access server, a quite straight-forward and very customizable system. Only we have a problem, I guess caused by Apache, when we try to reach the client web server via a custom port (see screenshot in attachement) we get the following error: Code: 501 Not Implemented. The requested method is not implemented by this server. Although we have added on the cisco router a port forwarding for port number 9943. It is working when we access the website : port with the local IP address [URL]...
View 2 Replies View RelatedMy FC13 installation works fine. I use SquirrelMail no problem, and have also used emacs's Rmail for sending and getting mail. I'd like to be able to use my iPhone use my server for sending and retrieving mail, but I guess I just don't understand what's required. For example, I add a new account on my iphone for an imap account and add the host name under incoming and outgoing mail server, but the account verification just times out. I can't send or receive mail. Clearly there's more to it than I understand. Is there a setup guide somewhere or can someone advise how to set this up?
View 1 Replies View RelatedI decided to try connecting my iPhone to see if it played as nice with Lucid as everyone was saying. It did, it worked fine. However now I have the final release installed (I did a fresh install the day of the release) and haven't tried connecting my iPhone until today, and now... nothing. No pop ups, nothing shows up on the Desktop, Places menu, or in "Computer". I opened both Banshee and Rhythmbox and it doesn't show up, however if I open Shotwell Photo Manager it shows Apple iPhone 3G (PTP Mode) at the bottom, although I can't access it. I'm not sure what PTP mode is or whether or not it has anything to do with my problem. Does anyone know what the problem could be? The iPhone shows that it is connected on it's screen so something must be happening but Ubutnu just can't see it.
View 5 Replies View RelatedWhat client can I use on a MAC to connect to an openvpn server?
All the client s seem to use password connections whereas the openvpn server uses certificates.
I've been looking around at how to set up a VPN server on an Ubuntu box that I can connect to from wherever from an iPhone.What I'm looking for is something like this: [URL]but it did not work (Connecting errored out).I've heard of OpenVPN, but will that allow me to directly connect from my iPhone to my home network?
View 3 Replies View RelatedThis will be a little long (having read Phil's 'how to ask questions' FAQ). I'm trying to get OpenVPN working between my CentOS server and some Windoze laptops running XP. There seems to be plenty of sample
config files available, but to date, none of them have worked for me. Pulling out my trusty Wireshark, I've found some clues,
BACKGROUND:
My local subnet (NAT'ed by my gateway router) is 192.168.52.x. My router has been configured with a conduit (port-forward) for port 1194 (the standard OpenVPN port), which points towards my CentOS server.The CentOS server is .52.112, and the supplicant is .52.110. I have tried the lient both inside and outside my local subnet, with no difference in events or outcomes.
[Code]...
I was wondering if it would be possible to set up a server on my desktop that has a folder of videos converted to iPhone formats that I can access with my iPhone over the internet to stream videos to my phone?I started by setting up a server and used no-ip2 to create a domain name so I didn't have to worry about my dynamic ip changing.Then I tried unsuccessfully to transcode a DVD to iPhone format using Arista, Transmaggedon, and Avidemux, none of which I could get to properly work.
Finally I used iUI (URL...) to create a site that would appear as a simple menu to search through my movies on my website and stream them.This failed in that every time I set a static link it would change it to URL...
I need to run a 2nd instance of openvpn on my server so that it can run on udp. The current one runs on tcp and I need to keep that running. Apparently, I need to create a 2nd tun network for it to use - how can I do that? I tried starting a 2nd instance of openvpn but it just seems to hang.
View 1 Replies View RelatedWell, after installing the 64-bit RTM release of Windows 7, I finally became too fed up to stand it anymore. My BIOS does not recognize more than 3 GBs of RAM and therefore even my 64-bit Operating Systems (Windows 7 and Fedora 11) can't see or use the extra gig. Is there any way to get another BIOS or to add the support to my existing BIOS?
Oh, before I forget, I am using an Acer Aspire 5630 incase the model is required.
I try to establish basic connection between my 2 end systems using openvpn. The problem is when i move the client files to my laptop i cant even ping the server from there. I copy paste the server commands in section 4 [URL] ....
In the client i ran the first command and changing VPNSERVER IP with 10.9.8.1 and LOCALGATEWAY IP with 192.168.1.1
which i thought that whats the server use : ROUTE_GATEWAY 192.168.1.1/255.255.255.0 in the server initialization process
The second command produce error device tun0 not found and when i create one using openvpn --mktun --dev tun
I get RTNETLINK answers : network is unreachable
Note : I use wireless connection in the client system (laptop). The server works good and i could ping him ( from the same machine ) but cant ping him or access the vpn server in my laptop. I also use default openvpn settings...