OpenSUSE Network :: Wireless Usb Adapter Freezing Computer WUSB54GCv3
Feb 1, 2010
Let me start by saying that with the previous kernel 2.6.31.5 when I opened network configuration, it didnt even recognize my card when i'd go to modules. After I updated to 2.6.31.8 it didnt recognize it until I installed the ralink-firmware 1.1.3.5. After that I could configure it using rt2870sta setting in modules. But once I restarted it would freeze after a few seconds after I could see the desktop on startup. I reconfigured the card to be 'manually' powered, but now it just freezes when I click on the access point I want to connect to. When it freezes the caps lock and scroll lock start blinking and the only way to turn off is holding the power
View 2 Replies
ADVERTISEMENT
Mar 10, 2010
Recently I purchased a Linksys WUSB54GCV3 Wireless adapter. I wanted to use this on my xubuntu 9.04 version and kernel version is 2.6.28-14-generic.system. But unfortunately this doesn't support.
View 9 Replies
View Related
Nov 3, 2010
Works fine in Windows 7 on this PC. It's a 2 week old Dell Studio 1749, with no after market software installed aside from Ubuntu (as a secondary OS). When I plug the USB adapter in, the computer locks up. Only while in Ubuntu though. Not sure what the deal is. Chipset is RealTek RTL8187. The adapter is new, fresh out of the box.
View 1 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Dec 22, 2010
After had installed opensuse 11.3 I am about toset a usb stick and connecting to internet. I can connect with ethernet but as I want to have also wireless internet I bought a LEVELONE WUA-0605 wireless usb adapter witch I can't setup and connect...
The only data witch I was able to find are:
linux-0wi7:~ # hwinfo --wlan
21: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: 2UT6.NomXlQ88uo3
Parent ID: k4bc.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0
SysFS BusID: 1-3:1.0 .....
View 9 Replies
View Related
May 26, 2010
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 1 Replies
View Related
Aug 9, 2011
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
View 9 Replies
View Related
Jan 29, 2010
The linksys wusb54gcv3 usb wireless device appears to have either the ralink 2070 or the ralink 3070 chip. Has anybody got this to work in Slackware 13? I searched this forum and haven't found any current solutions. Nor can I find a current slackbuild for this device's chip.
Here is the output of dmesg | tail for the device:
usb 2-1: USB disconnect, address 2
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: New USB device found, idVendor=1737, idProduct=0077
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: 802.11 g WLAN
usb 2-2: Manufacturer: Ralink
usb 2-2: SerialNumber: 1.0
usb 2-2: configuration #1 chosen from 1 choice
No modules loaded for the device, however.
View 9 Replies
View Related
Jun 6, 2010
The first two times I entered the wireless key on the prompt that appeared shortly after login, the computer froze completely. ctr-alt-f1 ctr-alt-backspace did nothing. The third time, I closed the first prompt and after 10 minutes I tried connecting again. It didn't freeze, at first. The internet worked. It took about 10 minutes later for it to freeze. Now, whenever I boot up, it freezes a few seconds after login. I can boot recovery mode, but I don't know what to do from there. Heres some info I got from the recovery mode:
Computer Brand: Sony PCV RX850
Ubuntu 10.4 32 bit 2.6.32-21-generic i686
Realtec 8185L chipset
iwconfig
[code]....
View 3 Replies
View Related
Aug 3, 2011
I first noticed the problem because my wireless internet will stop working. The usb stick has its LED constantly on but it fails to connect. I have tried some methods of restarting the networking, like "sudo restart network-manager", disabling and re-enabling the wireless and networking from the taskbar applet. I tried removing the module and restarting it. It might be a bigger problem because I'll find that things will randomly hand for awhile, like opening system monitor, or running terminal commands. They do eventually run but only after several minutes. A restart seems to get everything working again, but the problem comes back at random times. I am willing to solve this right now as I have time, just let me know what info you need and I will post it.
Update: Some more info I forgot to include. I am running Ubuntu 11.04. It just froze again, I tried logging in and out but the internet still wouldn't work and things were hanging, I couldn't get file manager open. I have even tried shutting down the computer and had it stall on the Ubuntu logo with the dots loading so I had to hard restart.....
[code]....
View 9 Replies
View Related
Jul 8, 2011
Was wondering if anyone had a idea on how to install this wireless adapter onto a computer thats running Ubuntu. I don't have access to a direct connection so that won't work. So I need a way that I could install it without internet, I do have access to another computer that i could get files off of if needed.
View 5 Replies
View Related
Nov 24, 2010
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
View 2 Replies
View Related
Dec 10, 2010
I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies
View Related
Jan 12, 2011
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies
View Related
Aug 30, 2010
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
View 2 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Jun 8, 2011
I am currently using opensuse to run a server, however I am experiencing some difficulties. Every once in a while, and I mean completely randomly. This will occur out of no where, and then not happen for five days, then occur twenty times in a row. What happens is the computer runs fine, and all is well but suddenly it wont connect to the internet. All applications are fine and everything is working. It isn't frozen, just won't load webpages. I am using a belkin 111v2 wireless g adapter and it usually works fine.
So when the internet freezes, if I unplug any usb the computer freezes. The mouse stops moving and the keyboard won't respond. The caps lock light won't even turn on. However the laser on the mouse is on, but the computer won't respond. Its like its shutting off the usb hubs. The only thing to do is force shut it off and restart until i no longer have the problem. Sometimes it helps if I open it and re-seat the ram, but that gets old. Does anyone have a solution?
View 5 Replies
View Related
Sep 26, 2009
I have only been using Fedora for a month. I am trying to get a second computer up using the WUSB54G network adapter chipset 1915:2234. But the NetworkManager does not recognize it and it does not come up in the list of adapters when I try to add it.
View 8 Replies
View Related
Feb 12, 2011
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
View 6 Replies
View Related
Oct 20, 2010
I just started using Ubuntu 10.10 recently. and Im not really sure how most of this stuff works. I could probably figure most of it out myself, but I have a question about using a wireless USB stick for internet.I do not have internet on my desktop (the computer with linux on it) and the only way i can get it is by using a Dynex Wireless G USB Network Adapter.
I do not have the disk for it. and Im guessing linux doesnt have the autoinstall thing that windows has (no offense to linux, im starting to love it more than windows). I have the driver for it on my windows computer. I was wondering if i could run the driver from a usb thumb drive.If not, then how can i get the network adapter to work?
View 5 Replies
View Related
Aug 17, 2010
We need to fina a wireles adapter that works with Ubuntu.We have a netgear adapter but the OS doesn't recognize it when we plug it into the USB port and there isn't software to install so it will recognize it - only Windows documentation.My daughter loves this OS and wants to keep it but can't connect to our wireless network without an adapter.
View 7 Replies
View Related
Jan 20, 2011
I use openSUSE 11.3 with KDE 4.4 and I have a Belkin Share Wireless USB Adapter (F7D2101 v1) , I attached the adapter and rebooted the system, it does not work. Can someone help me configure?
I attached the adapter and the system says:
dmesg | tail
[ 1184.799076] usb 1-1: USB disconnect, address 2
[ 2003.060031] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 2003.194525] usb 1-1: New USB device found, idVendor=050d, idProduct=845a
[ 2003.194531] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2003.194535] usb 1-1: Product: Connect Wireless USB Adapter
[Code]...
View 9 Replies
View Related
Mar 27, 2011
Following sticky Thread: Getting Your Wireless to Work - Everything seems okay through step VI, getting an IP address through DHCP. It appears that authorization is failing. Results from steps in sticky:
Note: This is a new installation of openSUSE on fresh (formatted) workstation
Step II What device? Hardware info from YAST - Wireless LANUSB2.0 WLAN (wlan0)Kernel Driver: zd1211rw lsusb reports "Bus 001 Device 002: ID 050d:705c Belkin Components F5D7050 Wireless G Adapter v4000 [Zydas ZD1211B]"
Step III External firmware? I downloaded the b43 packages, installed as normal and used etc/SysConfig editor to add b43 to modules loaded on boot.
dmesg|grep firmware
[ 22.468807] zd1211rw 1-3:1.0: firmware version 4725
Ran the following check from another thread
rfkill list all
0: phy0: Wireless LAN
[code]....
View 9 Replies
View Related
Apr 27, 2009
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
View 9 Replies
View Related
Jul 14, 2010
To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies
View Related
Aug 31, 2010
I have an HP Pavilion dv5 1002nr laptop running Vista. I decided to install Ubuntu using the windows installer, which did install well, but I decided that it wasn't for me, and uninstalled it. Now, my wireless adapter which is a Atheros AR5007 802.11b/g can see the network, find networks by itself, and is supposedly installed correctly according to Vista, cannot connect to any networks at all despite being able to see them and acquire a signal strength. Up until installing Ubuntu I have never had an issue like this. Other devices have no trouble connecting to this network, and I am currently using a Netgear wireless usb dongle to connect to the very network that my Atheros can not connect to.
View 2 Replies
View Related
Mar 11, 2010
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper -i rt73.INF
ndiswrapper -l
modprobe ndiswrapper
iwconfig
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
View 3 Replies
View Related
Feb 20, 2011
when i type ssh@othernode the terminal freezes, without saying have alot of fun or anything, it just freezes. PS:firewalls on both machines are down, public and private keys are successfully and correctly exchanged.
View 8 Replies
View Related
May 26, 2010
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 4 Replies
View Related
Sep 6, 2011
I am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
View 7 Replies
View Related
