OpenSUSE Wireless :: Belkin Components F5D7050 Wireless G USB Adapter?
Mar 27, 2011
Following sticky Thread: Getting Your Wireless to Work - Everything seems okay through step VI, getting an IP address through DHCP. It appears that authorization is failing. Results from steps in sticky:
Note: This is a new installation of openSUSE on fresh (formatted) workstation
Step II What device? Hardware info from YAST - Wireless LANUSB2.0 WLAN (wlan0)Kernel Driver: zd1211rw lsusb reports "Bus 001 Device 002: ID 050d:705c Belkin Components F5D7050 Wireless G Adapter v4000 [Zydas ZD1211B]"
Step III External firmware? I downloaded the b43 packages, installed as normal and used etc/SysConfig editor to add b43 to modules loaded on boot.
dmesg|grep firmware
[ 22.468807] zd1211rw 1-3:1.0: firmware version 4725
Ran the following check from another thread
rfkill list all
0: phy0: Wireless LAN
I have a Belkin G Wireless USB Network Adapter that I cannot get working for the life of me...USB adapter hardware: F5D7050 Ver. 3136 (v3000) Below are ouputs after a fresh install... Then I tried to install the newest drivers from ralink [URL] I blacklisted the current drivers and installed these and everything looked the same as before. Even if i blacklist the 3 drivers
rt2500usb rt2x00lib rt2x00usb
They are still loading at boot. Is there any way to make this work. I would try ndiswrapper but even when blacklisting those above, they are still loading.
System: HP G50 Laptop with on-board atheros card that used to work, but now even has issues in windows
Bus 002 Device 002: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2573] With a fresh F14 install, I plug the device in, does not light up or work, yet shows in network manager
Wireless Network (Atheros 5001 Wireless Network Adapter) wireless is disabled Wireless Network (Belkin 54g USB Network Adapter) wireless is disabled
I cannot click on either of these. So I check dmesg...
Code:
$ dmesg
Code:
[ 736.739057] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 737.026971] usb 2-3: New USB device found, idVendor=050d, idProduct=705a [ 737.026978] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
I recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
Cannot Connect to a wireless network using a USB Belkin 802.11g Model F5D7050: Setting up a new pc is running opensuse 11.2 (i586) KDE 4.3.1
Question1) The HCL shows a version, how do I find what version i have? Question2) Why is rt73.bin not being loaded? I ask this because the file is located in Root/lib/firmware Question3) Why is Configure Desktop > Network Manager > Wifi is blanked out as if doesnt exist?
Question 4) when using YAST > Network Settings > Initially under wireless network card configuration I can scan the area and find networks successfully (I got 2, one as a wifii hotspot from my pda cell phone, the other is the standard wireless network for laptops and such).... but if i use kinternet >wlan0 > wireless connection, nothing will be found! I did a search on the /var/bootlog msg for "switch" and "radio", for radio I found the following:
<6>[ 9.108858] Registered led device: rt73usb-phy1::radio <6>[ 9.108884] Registered led device: rt73usb-phy1::assoc <6>[ 9.108909] Registered led device: rt73usb-phy1::quality <6>[ 9.109386] usbcore: registered new interface driver rt73usb [Code].....
Trying to add wireless adapter to my fedora 13 system. Belkin f5d7050 raxwn450th v4000. Located zydas zd1211 driver on source forge. Downloaded and installed it
Code:
showed my dsl wireless adapter
system - preferences - network connections did not show it
I rebooted - now
Code:
shows my dsl adapter, and lsusb says
Code:
But it not show up on system - preferences - network connections
Would have prefered to install it via yum but dont know the magic words to get yum to find it.
I use openSUSE 11.3 with KDE 4.4 and I have a Belkin Share Wireless USB Adapter (F7D2101 v1) , I attached the adapter and rebooted the system, it does not work. Can someone help me configure?
I attached the adapter and the system says:
dmesg | tail [ 1184.799076] usb 1-1: USB disconnect, address 2 [ 2003.060031] usb 1-1: new high speed USB device using ehci_hcd and address 7 [ 2003.194525] usb 1-1: New USB device found, idVendor=050d, idProduct=845a [ 2003.194531] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2003.194535] usb 1-1: Product: Connect Wireless USB Adapter
i am complitly new in Ubuntu and the world of Linux in general, so i said to my self its better late then never, i installed the last one 10.10. but i am having trouble with my wifi usb adapter (BelkinF5D7050 v 1000), the same adapter works perfect under XP in the same PC. when i go to NM i dont see it in the list of network cards "i see just my two other normal network cards + loopback" and i have permanent small "x" on the icon of NM up in the task bar, even if check or uncheck "Enable Networking", it alwayes show a info bubble "you are now offline", here is the result of all the command line that can help getting better view on my problem
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
im downloading ubuntu for m desktop...my question is how do i listin to my music..and can i use m belkin usb wireless adapter??? does ubuntu have drivers for such things?
I've searched everything I can think of to find out if this or something similar has already been solved but I didn't find anything, that's not to say it hasn't already been done because I don't understand enough of what I'm using to search properly, if it has then I apologise.
The problem I have is connecting to the internet using Ubuntu 10.4 and my Belkin Wireless G Gaming Adapter, I'll try and give an overview of my setup. PC - BelkinWirelessAdapter - Router.
The PC is connected to Adapter via ethernet, I set up the Adapter through my web browser to connect to my router, it finds the router perfectly but no matter how I set up the IP settings etc... it won't come up saying it is connected to the internet, the connection to the adapter itself seems okay as long as I am only trying to get into the adapter itself which requires a particular IP address, this address can't be used to get online though, so when I change it to what works on every other system I've used nothing happends, nothing happens when I use DHCP either. I'm a complete Linux noob so please make any responses as simple as possible lol
I had a Netgear Wireless USB adapter that got fried (probably because it was about 10 years old lol). It was a B and used to connect at 54 Mbps, but as it got older, was only connecting at 1 or 2 Mbps and would constantly disconnect and reconnect until it finally died.I went out and bought a Belkin Basic Wireless USB Adapter (Model Number: F7D1101). This one is an N and it connects at 150 Mbps when booted into XP, but when booted into Ubuntu 9.04, nothing shows up. It doesn't turn on, the list of networks isn't there.
Could it be that it's not compatible? I plug in the Netgear B and it shows up, connects and disconnects (because it's fried) and shows me a list of connections. But when I plug in the Belkin N, I get absolutely nothing at all. And I forgot how I connected the Netgear so...?By the way, the wireless router is a Netgear N that I got from Comcast Cable, if that helps in any way? Is there something that I need to do in terminal to "turn it on manually" or something?
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
I have just installed Ubuntu 9.10 alongside Windows 7 and it is not picking up my Belkin N wireless adapter?? So I went to go and download the Windows Wireless Drivers (ndiswrapper) software so I can install my adapter and the download center just says "Not available in the current data" and wont let me download it? Also I tried to download my nVidia drivers from software center and it said the same thing?
Never before have I had a problem with Ubuntu until now So can anyone point me in any directions as to how to get these installed???
am running Ubuntu 10.04 ... only because for some reason that is the only version that will load onto my IBM pentium 4 desktop! I installed ndisgtk, ndiswrapper-common and ndiswrapper-utils-1.9 by using the Synaptic Package Manager GUI. Using Windows Wireless Drivers GUI, I installed the driver rt 2870 off the Belkin CD that came with the product. Status is "Hardware present: Yes"
here is the status of my lsusb and iwconfig:
finn@finn-desktop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 006: ID 050d:935a Belkin Components
It seems I have ndiswrapper working (I think!) ... but i still can't connect my wireless.
I have just installed Ubuntu 11.04 on an old machine to get a feel for it. No problems with the install, but I don't have a LAN connection lead spare so I'm trying to install my Belkin Wireless G USB Adapter (K75-F5D7050B which requires version 3 according to the Belkin site).
Unfortunately I can't find any Ubuntu software & driver versions on their site and I only have a windows installation disc.
I tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.
Code: lsusb Bus 005 Device 008: ID 050d:935a Belkin Components Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
i have ubuntu 10.04 i believe and i cant connect to the intenret i guess its not detecting my wireless adapter. i cant try ethernet cord which prolly would work because i cant move pc to another room....is there any fix for this? i googled linux drivers but i cant find any...i do have the cd that came with the adapter.
I've been using Windows all my life (and still have to use it at work) but I made the big leap yesterday and installed Ubuntu on my personal machine (at last). With my "Windows-centric" mind, there are a million things that I still don't get, but I must say the community and forums look quite impressive and easy to access (kudos! ). I am testing this today!My current problem is with the wireless adapter. I have a Belkin N Wireless USB adapter (FSD8053v3) and Belkin, of course, doesn't make linux drivers. When I installed Ubuntu, it recognized it automatically and I could connect to my network, but navigation was very slow so I tried to install Belkin windows drivers using ndiswrapper. It worked immediately, and navigation was very fast. However after a reboot, I lost the connection, I can't even see any of the neighbouring networks.
I have a Belkin F5D8055au USB wireless adapter which I can't configure in YAST. I have downloaded the RT2870sta driver from RALink and compiled it - seemed to be ok. Modprobe loads it ok. Some info:
[Code]...
When I open network settings in YAST my wired (ethernet) card shows up but not the USB. If I manually add a wireless card, I can't select the kernel module from the drop down list - there is nothing in it. At that point I abort YAST. So, how do I convince YAST that there really is a USB wireless adapter connected?
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
I am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
I'm new to openSUSE, and Linux in general. I have downloaded the following file from the D-Link site: dwa140_BETAdriver_1201.zip I've copied it to a dvd, and have placed the dvd in my openSUSE machine. I've made several attempts at installing this myself, but Linux has me a bit stumped.
I just moved to Linux, and I really need some help for my wireless adapter. What I am using is Belkin F6D4050 v2. I think I should use the rt2870sta driver. After 2 days working, my laptop can recognize the wireless adapter now. But it can not find any wireless connections. There are some information. Hope they are useful.
