OpenSUSE Network :: Wireless Disabled After Update?
Dec 18, 2010
Just bought new laptop i7 with broadcom wireless, intalled opensuse 11.3 x64. I had major trouble to make it work... Even compiled kernel 2.6.37-rc6, but didnt go.Then I took drivers and firmware from git repositories, compiled, did what it was necessary and I made it work.This morning, (since system was new), I just did zypper upgrade (nothing new installed from default installation, I just added packman to repos).And, now wireless is not working. In network manager, option "enable wireless" is disabled.I went to YaST, put network on ifup, it did scan networks, but cant make it work either. Turned it back to network manager, but same thing.Module brcm80211 is loaded, but I cannot make wireless work.
View 4 Replies
ADVERTISEMENT
Mar 23, 2010
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies
View Related
Aug 18, 2010
I just switched to opensuse from fedora. So far, I like it a lot (KDE FTW). However, I am having a couple issues concerning hibernation and restarting.Whenever I merely close my computer but don't shut it off, I am forced to reboot. When I open the computer after closing it, everything stays black and nothing seems to work aside from a restart (no good, I know).When I restart, network management is disabled and thus I am prevented from accessing wireless. The only solution I have found is to hibernate, which for some reason fixes the problem. A restart however does nothing. So I guess I have two questions:1) Why can't I close my computer without turning it off?2) Is there a more permanent solution aside from merely hibernating after a crash that will fix network manager
View 7 Replies
View Related
Jan 2, 2010
When I ran updates and installed 9.10, this message appeared, "Network service discovery disabled. Your current network has a .local domain, which is not recommended and incompatible with the Avahi network service discovery. The service has been disabled." The computer will not respond to anything, completely frozen--I am not able to open any programs and the CPU itself seems to be running loudly.
View 1 Replies
View Related
Dec 27, 2010
1. If you are on a laptop check that the network function key is turned on. Mine is on F12 and has a bluish light for ON and reddish light for OFF.
2. Go to System > Administration > Users and Groups > Advanced Settings > User Privileges Check you have relevant permissions for Connecting to Wireless Networks and the Internet. (Also turned my audio on here after much trial)
I discovered these after spending hours following up suggestions on these forums. They might not solve everyone's problems but they will hopefully save some of you from fruitless searching
View 1 Replies
View Related
Jun 21, 2011
the only issue that i have: the wireless is always disabled.
when i install new updates, the wireless comes back enabled and everything is fine but when i restart ubuntu its disabled again !!
i have a DELL studio 1537 laptop (broadcomm wifi card)with a win7 service pack 1/linux ubuntu 10.04 LTS dual boot.
View 11 Replies
View Related
Jan 30, 2010
I installed the b43 drivers to enable the monitor mode for using kismet. but after installing, it shows "Device not Ready".
The dmesg | grep b43 output shows:
[ 86.449430] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[ 146.449335] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw
[ 206.448146] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 206.448153] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 206.448158] b43-phy0 ERROR: You must go to [URL] and download the correct firmware for this driver version. Please carefully read all instructions on this website. How to re-enable my wireless connection.
View 2 Replies
View Related
Feb 7, 2010
Wireless network card is showing as "disabled"...How can I enable it through Ubuntu?
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
*-network DISABLED
View 3 Replies
View Related
Jul 23, 2010
I have a weird problem that I can't find the answer for in the forums or docs. I can see the wireless network in Network Manager, but it is grayed-out and inaccessible. Other wireless networks are white and I can click on them and connect to them (or could if I knew the password).
My work computer, an IBM ThinkPad T43 running Win 7, connects.
My personal computer, a Dell Latitude C640 running Ubuntu 10.04, sees the network as grayed-out and therefore I have no option to connect to it.
I have tried the following:Checked for hardware drivers - the system says "No proprietary drivers are in use on this system"
Verified that the network security settings are the same on both my work and personal computers: WPA2-Personal
Why can I see the network but it is disabled/grayed-out?
View 8 Replies
View Related
May 29, 2011
I've installed ubuntu 10.04 on a hp mini 110. I've used netbook remix on this same computer and had no problems with a wireless connection. In this case, network manager shows wireless disabled. I have installed the Broadcom B43 Wireless drive from Adminstration->Hardware drivers. No help! ifconfig does not
show eth1 and lspci tells me that the Broadcom BCM4312 Network controller is present.
View 9 Replies
View Related
May 6, 2010
I have just installed FC12 on my machine - and gone Windows free for the first time ever. Now I do use various flavours of Linux on a daily basis but not from an installation/sys admin point of view so my questions here may seem a little basic but pleas eindulge me if you will!
Now, my network connection works perfectly well under the following scenarios.
1) FC12, wired to router
2) FC12, wireless, SSID broadcast enabled
3) Ubuntu (laptop), wireless, SSID broadcast DISABLED
The only scenario that does not work is FC12, wireless with SSID broadcast disabled.
I can only assume that it is an issue with my USB modem (a linksys WUSB54GS) since the same set-up works fine from my laptop running Ubuntu with an internal wireless card.
Now, I know from reading the forums that it's pretty easy to get around a disabled SSID broadcast but this is an itch I just have to scratch....what the hell is causing this problem?
nm-tool ouput is as follows:
I have tried using wpa_supplicant but I am not sure which driver I am using here - is it ndiswrapper per chance?
(Driver: rndis_wlan)
How I can connect once again to my wireless router with SSID broadcast turned off.
View 5 Replies
View Related
Dec 19, 2009
I tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.
After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.
Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!
But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)
View 5 Replies
View Related
May 21, 2010
I have an Asus EeePc 1001PX and on resume I have "Network Management disabled", neither wired nor wireless interface can be configured, the NM icon is greyed out. running ifconfig shows eth0 and wlan0 have disappeared completely.
I found 2 options:
1. https://bugs.launchpad.net/ubuntu/+bug/555571
2. Network management disabled after start on 11.2 - openSUSE Forums
but I don't have the /var/lib/NetworkManager folder at all
View 4 Replies
View Related
Sep 12, 2010
I installed OpenSUSE 11.3 with disabled WLAN (otherwise the installation process didn't start). Now the system boots only in Safe Mode with enabled WLAN card (when the WLAN card is disabled it also boots in normal mode though). But even if I try to configure the WLAN card in Safe Mode, the system doesn't boot next time (in Safe Mode) until I add "brokenmodules=ssb" parameter. As I understand after reading this forum I should install a firmware/driver, but there is no install_bcm43xx_firmware script in /usr/sbin directory.
[Code]....
View 3 Replies
View Related
Jul 24, 2010
I'm running SUSE 11.3 on a Dell Inspiron 1501 with a Broadcom BCM4311. I finally got the wireless working earlier with some help from caf4926 and now the card keeps disappearing almost like someone went into the BIOS and disabled it.
View 7 Replies
View Related
Mar 3, 2009
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
View 5 Replies
View Related
Dec 6, 2009
I have a working wireless connection on OpenSuSE11.2 but after installing the KDE network manager, clicking on its icon only gives this message: "Network Management Disabled"
View 6 Replies
View Related
Oct 28, 2010
I did a fresh install of OpenSuSE 11.3 KDE 64-bit on my new laptop. Worked like a charm. But I brought it with me to work without connecting it to a wi-fi and now the network manager doesn't want to start when I'm back in range of my home connection. Also, whenever I try to launch KNetworkManager, it won't load up a window and I still can't connect. This is even disabling the Ethernet port also.
View 3 Replies
View Related
May 25, 2010
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
View 3 Replies
View Related
Aug 3, 2011
I just performed the newest kernel update to version 2.6.37.6-0.7 (desktop). Unfortunately, there is no update for the compat-wireless package available. It's still the version for kernel 2.6.37.6-0.5. Hence, my wireless is currently not working and I had to pull a cable through my apartment to write these lines. I actually thought due to the change of the very last digit in the kernel version that this should be a rather safe update. But I also had to recompile the modules of the NVidia driver and of Virtualbox. Does anyone has an idea when new compat-wireless modules will be available? Or do I have to re-compile them myself (I never had to do that before and I really hope that I don't have to)? Or is there a trick to make the old modules work?
View 9 Replies
View Related
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
Aug 19, 2011
I just updated my fedora 15 which, between others, included a kernel update. After reboot no wireless network is shown.
Code:
lsmod | grep 'b43 | bcma | wl'
returned
[code]....
View 13 Replies
View Related
Apr 17, 2010
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
View 2 Replies
View Related
Apr 13, 2010
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies
View Related
Sep 30, 2010
I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
View 5 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Feb 9, 2010
I've been enjoying wireless for a long time on Squeeze (iwl3945) with KDE, but the recent network manager update stopped that. I've tried a few things, like going back to /etc/network/interfaces and ifup wlan0 that I use with Lenny, but still not working.
View 14 Replies
View Related
