I have a working wireless connection on OpenSuSE11.2 but after installing the KDE network manager, clicking on its icon only gives this message: "Network Management Disabled"
View 6 RepliesWhen i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.
After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.
Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!
But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)
I have an Asus EeePc 1001PX and on resume I have "Network Management disabled", neither wired nor wireless interface can be configured, the NM icon is greyed out. running ifconfig shows eth0 and wlan0 have disappeared completely.
I found 2 options:
1. https://bugs.launchpad.net/ubuntu/+bug/555571
2. Network management disabled after start on 11.2 - openSUSE Forums
but I don't have the /var/lib/NetworkManager folder at all
I just switched to opensuse from fedora. So far, I like it a lot (KDE FTW). However, I am having a couple issues concerning hibernation and restarting.Whenever I merely close my computer but don't shut it off, I am forced to reboot. When I open the computer after closing it, everything stays black and nothing seems to work aside from a restart (no good, I know).When I restart, network management is disabled and thus I am prevented from accessing wireless. The only solution I have found is to hibernate, which for some reason fixes the problem. A restart however does nothing. So I guess I have two questions:1) Why can't I close my computer without turning it off?2) Is there a more permanent solution aside from merely hibernating after a crash that will fix network manager
View 7 Replies View RelatedI am running Ubuntu 10.10, and the icon for my wireless connection says it is disabled. Although my Wireless USB Adp.How do I get to enable the network icon????
View 1 Replies View RelatedIn the LiveCD there is an Icon. You can see it left of this pic.
This Icon is missing in a FULL INSTALL of openSuSE, how can I make it shown up.
I have KDE Desktop.
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
I just installed openSUSE 10.3. Unfortunately after updates and reboot the system and disappeared from the taskbar network icon. Does anyone know how can I restore?
View 9 Replies View RelatedI tried to use the Network manager but could't get it working so I disabled it and I set up my eth card and a dsl connection,it's work perfectly but I dont get any network icon ,can someoen tell me witch tool I can use,a beautifull one.
View 9 Replies View Relatedlanguage-pack-en, language-pack-en-base, language-pack-kde-en, language-pack-kde-en-base, libsoup2.4-1, libsoup-gnome2.4-1, pm-utils today on my laptop. Some hours later, I had to force the computer to shut down by pressing the power button, since it got totally lagged when I started it after an automatic sleep due to no power left. I started it, logged in and saw that the network manager was unmanaged. I got that message when I clicked the icon at the right-bottom bar.
So, I tried with "ifconfig" in a Terminal, as root.Therefor, I did "sudo ifconfig eth1 up", and the same with eth0. The network manager did not work anyways. I killed it using "sudo killall -9 knetworkmanager" and started it with "knetworkmanager" from the Terminal. The icon got removed and it appeared again, but nothing changed - it said "network manager disables", as before.I logged off and select "Restart X server" from the login screen. I logged in again and tried. Didn't work. When I restarted my computer I saw that eth0 and eth1 was down again. I took them up and then I checked the hardware settings. I saw that I could use either KNetworkManager, Fake Net or Wicd. I tried to locate if I had Wicd or Fake Net installed, but I hadn't.
Neither the wireless or the wired connection works now. I'd like to know how to fix the Network Manager, or whatever is wrong. Also, I'd like to know if I can install Wicd using a CD or something. Maybe Wicd works better, I have no idea. I'm using Kubuntu 10.04, the final release.
I just changed my power settings so that my laptop would hibernate when I closed the lid... but now KDE Network Manager has decided that it will not allow itself to be enabled. I can get my ethernet connection working through YAST... but I *really* need the wireless to work as well... so can somebody *please* tell me why KNM is being so stupid, and how I can fix it? EDIT: I just realized that I should have put this in the Network subforum...
View 5 Replies View RelatedJust bought new laptop i7 with broadcom wireless, intalled opensuse 11.3 x64. I had major trouble to make it work... Even compiled kernel 2.6.37-rc6, but didnt go.Then I took drivers and firmware from git repositories, compiled, did what it was necessary and I made it work.This morning, (since system was new), I just did zypper upgrade (nothing new installed from default installation, I just added packman to repos).And, now wireless is not working. In network manager, option "enable wireless" is disabled.I went to YaST, put network on ifup, it did scan networks, but cant make it work either. Turned it back to network manager, but same thing.Module brcm80211 is loaded, but I cannot make wireless work.
View 4 Replies View Relatedi want to create Central Opensuse repository for Patch management just like WSUS in windows,which automatically downloads Updates/Patches and distribute to the Clients locally.
View 1 Replies View RelatedI setup a server with vmware esxi 4. I installed opensuse 11.2 and I have successfully setup an internet gateway and I manually configured (static) my client IP. My question is, is there any software or commands that I could use to manage the bandwidth usage for each client? eg. only 5Mbps for 192.168.1.5, 10Mbps for 192.168.1.10, etc
View 3 Replies View RelatedI did a fresh install of OpenSuSE 11.3 KDE 64-bit on my new laptop. Worked like a charm. But I brought it with me to work without connecting it to a wi-fi and now the network manager doesn't want to start when I'm back in range of my home connection. Also, whenever I try to launch KNetworkManager, it won't load up a window and I still can't connect. This is even disabling the Ethernet port also.
View 3 Replies View RelatedI am running a opensuse 11.4 with mailx 12.2. I am trying to sent emails via command line using mailx. I have not configured any mail server in yast. My .mailrc in my homefolder looks like this:
set smtp-use-starttls
account gmx {
set smtp=mail.gmx.net:465
set smtp-auth=login
set smtp-auth-user=my.name@gmx.de
set smtp-auth-password=mypassword
set from="My name <my.name@gmx.de>"
}
Unfortunately when I use the command
mailx -s"Test" -A gmx my.name@gmx.de [Return]
Hallo
[ctrl+d]
I am getting only the message
Unexpected EOF on SMTP connection
"/home/myname/dead.letter" 11/338
. . . message not sent.
(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:
[code]...
Anyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
I am using 11.3 on one machine and 11.2 on the other (a netbook). 11.4 won't install on either and 11.3 on the netbook fails to install as well.
I am using the same setup as I have always used when both systems ran 11.2 (details below) but now I can only mount a drive in one direction. In the other direction the mount command gets stuck with no error message until it eventually times out. I can ping and ssh the machines from each other without difficulty.
Even in the direction in which the mount apparently works (11.2 mounting a drive on the 11.3 machine) when I try to copy files across nothing actually happens.
exportfs -a was run successfully on the exporting machine, and nfsserver is running on both machines as does nfs client.
The exporting machine is 192.168.1.102 (eeelinux) and the other machine is 192.168.1.101 (nina).
Details:
The /etc/exports file on the exporting machine (192.168.1.102) looks like this:
eeelinux:/home/naima # more /etc/exports
# See the exports(5) manpage for a description of the syntax of this file.
# This file contains a list of all directories that are to be exported to
# other computers via NFS (Network File System).
[Code].....
I have local and remote networks that have various printers. I can add any printer (local or remote) to any PC, except for one PC that's refusing to allow remote connection (it used to, but doesn't now!). The problem PC has two printers connected and work OK as a local printer, but both display same problem when attempting to connect from any remote PC via YaST. Using 'Connection Wizard> CUPS Server' connection method requires IP address of remote PC and printer name. But if I correctly select either of the two printers I get an error message:
"PING 192.168.1.149 (192.168.1.149) 56(84) bytes of data.
64 bytes from 192.168.1.149: icmp_seq=1 ttl=64 time=1.12 ms
Both printers are set to 'Accept Print Jobs' and 'Share Printers> Allow remote access' permits all networks to connect. why this PC is requiring the root password?
Wondering if any one else is having this problem lately under 11.4. My Skype does not want to launch any more. When I click to open Skype, the tray icon will pop up for 1 second and then just disappear. Have tried launching from command line to see if there are any messages, but it just says aborted when you try launch it.
I noticed this started happening randomly when I had the laptop in hibernate and then would resume, Skype would then just disappear and then I would just relaunch it and it would be find again.
When I open the software management , I get the message "There was an error in the repository initialization.". And when I try to install anything I get the message "bla..bla locale::facet::_S_create_c_locale name not valid". In the terminal I typed
[code]....
I updated my NetworkManager from version 0.9svn1128615-2.2 /opensuse/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/i586/) to the newest version 0.9svn1128615-138.2.The result was, the after reboot an error message occured, saying that the KNetworkmanager is not working and it would be not able to start the program !Did anybody else have the problem with this newest version?
View 2 Replies View RelatedI absoultely cannot figure this out... No matter which browser (FireFox, FireFox4, Seamonkey, etc) I try to use, I always get this error message:
Replace "seamonkey" with whichever browser stated previously.
After a disastrous foray into LDAP I restored NIS on a very simple network run by a very simple operator. Everything now works except for YaST on the NIS master. I can't manage NIS users in YaST any more. The option 'show NIS users' is now absent from the 'filter' button up in YaST "User and Group Management" So, after following the YaST route to LDAP there seems no way back...
These are OpenSUSE 11.3 boxes and the slave NIS server can't [obviously enough] delete expired NIS users on the master, although it sees them fine. Disabling or changing NIS server or client on the Master simply restores the 'wrong' settings - nothing is erased or cleaned. How do I clean up NIS controls so YaST sees it properly? or What do I need to do to restore NIS group & user control to YaST?
I can see my Suse 11 severs, ftp to it and sit up share folder but can't login as user from workstation as users. It IBM eServer 235 2X3.8Ghz Xeon, 6GB of memory with 6X73.6 Hard Drive got this message error; The following security events occurred since Thu Jan 20 19:29:40 2011:
type=APPARMOR_DENIED msg=audit(1295580702.142:653): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/var/lib/samba/unexpected.tdb" pid=4873 parent=1 profile="/usr/sbin/nscd"
type=APPARMOR_DENIED msg=audit(1295580702.234:654): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/var/lib/samba/unexpected.tdb" pid=4873 parent=1 profile="/usr/sbin/nscd"
Charles E. Hightower
Ht280@yahoo.com
charles@santech.net
Charles E. Hightower - LinkedIn
I use an internet connection with a proxy. I have set the proxy in Firefox and systemsettings so now I can browse the web and I can ping Google from Console. But when I start Software Management, it says "Cannot access installation media". Whats wrong?
View 3 Replies View RelatedOn Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies View RelatedI usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.
View 3 Replies View Related