OpenSUSE Network :: Unable To Locate Computer By Hostname?
Aug 24, 2011
I went into Yast and disabled the SYSLOG service, ignoring the warning of which services would be affected, I went ahead anyway and stopped it. Sure enough, a handful of other services stopped as well.Now I have almost recovered the PC from this foolish mistake of mine, the only problem I seem to be stuck with is I am now unable to locate the computer on my LAN by hostname ... does anyone know which service I should restart please (if it helps, the computer can resolve DNS names such as Google.com OK)?
View 3 Replies
ADVERTISEMENT
Mar 14, 2011
When browsing in WinXP Windows Explorer to view an OpenSUSE computer, the displayed name is:
Samba 3.5.4-5.3.1-2489-SUSE-SL11.3 (*hostname*)
Other Windows computers display as:
[computer description]([hostname])
How can I change the "computer description" within OpenSUSE?
View 3 Replies
View Related
Apr 10, 2011
I've a little trouble: I reinstalled on my notebook OpenSUSE 11.3 yesterday and I'm unable to change the hostname. I modified it, but when I type on terminal
Code:
uname -a
it doesn't give the right answer but returns
Code:
host
I don't know where I wrong because I did this action many times with Opensuse 11.1 and 11.3 without any problem.
View 9 Replies
View Related
May 11, 2011
unreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies
View Related
Jun 13, 2010
I setup the hostname for my linux machine to Linux. If I try ping Linux from the same computer it works. If I try from another computer inside my network the host can not be resolved. If I ping the IP from another computer it works.
I take a look in my router at DHCP client list and my linux machine doesn't have the Hostname set up.
How to broadcast the hostname to the entire network?
View 8 Replies
View Related
Jan 11, 2010
How do you change the hostname in SLES11? I have normally used the /etc/hostname file and rebooted the server in other distros. I only notice the way to change it is in yast2 -> network devices -> network settings -> Hostnames. I am looking for where it is stored because I want to write a script to update it (apart of a server deployment process).
View 9 Replies
View Related
Jan 29, 2011
I cannot uncheck the "Change Hostname via DHCP" box because it is disabled. Next to it says "No interface with dhcp". How can I fix it? I'm using OpenSUSE 11.3/KDE4
View 3 Replies
View Related
Nov 17, 2010
Just completed a fresh netinstall of OpenSUSE. This machine previously had a Ubuntu install on it, but I was having all sorts of issues and decided I required a fresh start. The install itself went acceptably, although I ended up manually fixing GRUB.Now the system is running, I've got a ridiculous problem, in that I'm still seeing the old hostname- It used to be ubuntu-server, but should now be unimatrix-001.Checked both the obvious places (/etc/HOSTNAME & YaST), but the correct hostname is in both of them.
View 5 Replies
View Related
Feb 16, 2011
I'm trying to use LDAP with TLS but allways got Connect error. The message error is TLS : hostname does not match CN in peer certificate So I've tried to generate new certificate with my hostname for CN but my LDAP still don't want to work with TLS.
I use opensus 11.3. I used YAST2 for crating my CA and certificates.
View 9 Replies
View Related
May 4, 2010
Anyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
View 2 Replies
View Related
Apr 1, 2011
I installed openSUSE on my notebook with an usb drive using openSUSE 11.4 KDE LIVE iso. The installation process set the name to "linux-ygrl" which I don't really like. (I probably just missed the setting during the installation.). I tried to change it through YaST -> Network -> Hostnames and I set everything where needed to the new name and restarted but the changed weren't applied. I searched the web and found out about the /etc/HOSTNAME file which still contains "linux-ygrl". Now I could change it manually but I was wondering if there is a GUI for it? (I mean, openSUSE has for alsmost everything a GUI.
View 9 Replies
View Related
Apr 21, 2011
.site gets appended to the end of the hostname every system bootup for me (e.g. hostname.site), even though I've changed the hostname in both the Network Settings and Hostnames sections of YaST. How can I stop this?
View 7 Replies
View Related
Nov 6, 2010
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies
View Related
Apr 6, 2010
How do I set $HOSTNAME to dynamically update with the hostname that is specified for the ip in DNS?
View 3 Replies
View Related
Mar 27, 2010
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies
View Related
Nov 9, 2009
I am using FC9 and internet is working fine on it.
Well, I ping to google, it is resolving but if I ping by hostname to other LAN computers. it gives error : unknown host.
But if i ping with IP address it is pinging.
NOTE :
1) My firewall is acting as a dns server and other windows systems are resolving it.
2) FC9 firewall is disabled.
View 5 Replies
View Related
May 6, 2011
My server's hostname is 'cookhome'. I am wanting it to broadcast over my network so I can just use that name instead of the IP address, but it isnt working. I am unable to ping it from any other computer./etc/hosts
Code:
127.0.0.1 localhost
127.0.1.1 cookhome
[code]....
View 2 Replies
View Related
Jun 17, 2011
I am having problems with this computer program called fluent. I have a service request open with them and they need to know my computer's hostname. ANything I have tried tells me that my computers hostname and fqdn is localhost.localdomain. The people on the service request seem to not believe me. Is there anyway that the computer hostname is hidden? This is what I have tried:
[powder@localhost ~]$ hostname
localhost.localdomain
[powder@localhost ~]$ dnsdomainname
[code]....
View 4 Replies
View Related
Nov 22, 2010
I have Ubuntu server installed on my old machine, which has no avahi running. I want to be able to connect to it by hostname. Is it possible. I have a tp-link TL-WR941ND router, but it doesn't seem to have any related options. How can I do it? Is there another way?I know I can add them on by one to the host file, but that is not what I want. Also that wouldn't work well with DHCP, and new hosts.
View 3 Replies
View Related
Oct 5, 2010
I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9
[Code]...
View 1 Replies
View Related
Jan 31, 2010
I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
View 6 Replies
View Related
Dec 20, 2010
There is a computer in a home running opensuse into which I would like to login.
As usual, the computer is connected wirelessly to the home's router. I cannot control the router in order to direct incoming connections, say, on sshd port, to that computer.
Is there a way to log into that computer from outside?
The computer is fully under my control, as distinct from the home router. I know all relevant IP addresses. I can start any service on the computer, or start any command, or ask somebody to start a command while I am not at home.
View 5 Replies
View Related
Jan 22, 2011
I'm new to RDP. When I tried to log in to my account on my own PC using RDP, this is what I saw.
xrdp-sesman output:
starting sesman in foregroud...
sesman config:
ListenAddress: 127.0.0.1
ListenPort: 3350
EnableUserWindowManager: 1
[Code]...
What am I doing wrong? I'm pretty sure I'm able to type in my password correctly. Also, how do I prevent people from logging in as root? That sounds dangerous.
View 4 Replies
View Related
Jun 1, 2009
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies
View Related
Apr 4, 2010
I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies
View Related
Jul 17, 2011
I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies
View Related
Aug 9, 2010
I am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
View 3 Replies
View Related
Jun 8, 2011
I am having a situation where I couldn't connect to Internet through wireless and LAN cable. I have done ifconfig, it only shows me "lo" info. May I know how can I bring up the LAN and wireless?
View 2 Replies
View Related
Sep 6, 2011
I'm going to come right out and say I am a complete novice with Linux/SUSE. The equipment I'm having a problem with is a little web-server that was purchased by my employer that has, quite suddenly, stopped functioning. I was changing the IP address within YaST, at which point the device offered to update itself, which I saw no harm in. Post-update, however, I was unable to so much as ping the device.
I tried "ifconfig eth0": "Error fetching interface information: Device not found." I went into network settings via YaST and found that there are two cards now listed as: RTL8111/8168B PCI Express Gigabit Ethernet controller Both IP addresses are "Not configured". The information pane, for both cards, cites:
RTL8111/8168B PCI Express Gigabit Ethernet controllerBusID : 0000:02:00.0 Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. The only difference in either of the cards is the BusID (0000:02:00.0 and 0000:03.00.0)
I can neither edit nor delete either of these cards. As I mentioned, I am a total Linux novice, and am at a total loss for what to do next, or even how to find critical information about the system itself. I know enough to check dmesg, but not enough to have any clue what to look for in the output.
View 9 Replies
View Related
Jun 21, 2010
I have host server for xen (11.2 x86_64) and another server holding linux images. Those images are accesible via NFS.
When I am installing new machine on my xen host and using images on nfs share; whole host-machine freeze during installation (random time, random packages, but it freeze everytime). I had to hard rebooted. Machine do not respond to ping. Performing same installaltion from local copy of same image (copy is done through NFS !) is always vithout any problem.
Xen host machine is MSI Wind and it have gb ethernet. I had some problem with it on Windows XP (disconecting) but on Windows Vista it was ok. On Linux I also did not encounter any problem so far.
Strange thing is that after hang there is no error in /var/log/messages. I would like to investigate what`s going on, what cause this freeze.
I am thing about sysrq messages, but this machine do not have any com port.
Here is output of lspci just for info
lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
[Code].....
View 2 Replies
View Related