OpenSUSE Network :: Unable To Run NFS On 11.1 - Nfsd: Non-standard Errno: -117" About 2500 Times Per Second
Feb 19, 2010
While doing some tests on a new Server running OpenSuse 11.1 nothing happened.When switching over to productive system serving the homedirs of 100 users the system run into trouble reporting "nfsd: non-standard errno: -117" about 2500 times per second.The nfs-share is on a seperat disk (xfs) about 5TB (2TB used) of data. The network interface is a bond0 (2 eth interfaces on E1000-nics).
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
I just don't get it? I've attempted multiple times to get the knetworkmanager to connect to an unencrypted network, yet it keeps asking for a wep key. However the networkmanager in the Gnome version connects to unencrypted networks just fine. Why won't knetwork manager do the same?
I have installed CentOS 5.6 guest in vmware. This machine has host-only networking. I would like to install vmware-tools, which requires that gcc be installed. (As vmware tools is not yet configured, I cannot copy paste the error. So I am typing it out). As gcc has dependancies, I thought of configuring a local yum repository via http. http is already up and running fine.These are the steps I did:
I mounted the iso as loopback in /mnt/cdrom.
cd /var/www/html mkdir -p yum/base-pkg
/var/www/html/yum/base-pkg is where all the rpm's going to be served via http will be present. I am changing the ownership of /var/www/html/yum/base-pkg to apache:apache, though not sure if this step is required.
chown -R apache:apache /var/www/html/yum/base-pkg Now, cd /mnt/cdrom ls CentOS | wc -l shows 2684
I am copying these 2684 packages as follows:
cp -avr CentOS/* /var/www/html/yum/base-pkg
I am also copying the directory "repodata" as follows:
cp -R repodata/* /var/www/html/yum/base-pkg Now, cd /etc/yum.repos.d
I am renaming the .repo directories to something else. I hope this will ensure that yum will not look into the default repositories, rather will look only into my custom repository file.
for i in $(ls); do mv $i $i.org; done
Now I am creating my repository file named mylocal.repo (in /etc/yum.repos.d)
touch mylocal.repo vi mylocal.repo [base-local] name=Centos $releasever - $basearch
I am unable to start my xserver, using the startx command that I have been using for the past 5 years. It goes to the blue loading screen with the x for a cursor, hangs there for about a min or so then goes back to the command screen. I get an error:
Code:
giving up. xinit: Permission denied (errno 13): unable to connect to xserver waiting for xserver to shut down xinit: Server error.I have tried logging on as root and trying startx again. Same error.
I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
I am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
I am having a situation where I couldn't connect to Internet through wireless and LAN cable. I have done ifconfig, it only shows me "lo" info. May I know how can I bring up the LAN and wireless?
I'm going to come right out and say I am a complete novice with Linux/SUSE. The equipment I'm having a problem with is a little web-server that was purchased by my employer that has, quite suddenly, stopped functioning. I was changing the IP address within YaST, at which point the device offered to update itself, which I saw no harm in. Post-update, however, I was unable to so much as ping the device.
I tried "ifconfig eth0": "Error fetching interface information: Device not found." I went into network settings via YaST and found that there are two cards now listed as: RTL8111/8168B PCI Express Gigabit Ethernet controller Both IP addresses are "Not configured". The information pane, for both cards, cites:
RTL8111/8168B PCI Express Gigabit Ethernet controllerBusID : 0000:02:00.0 Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. The only difference in either of the cards is the BusID (0000:02:00.0 and 0000:03.00.0)
I can neither edit nor delete either of these cards. As I mentioned, I am a total Linux novice, and am at a total loss for what to do next, or even how to find critical information about the system itself. I know enough to check dmesg, but not enough to have any clue what to look for in the output.
I have 8 files, and each contains around 2000 lines. I want to search the particular word in these files between line number 1500 to 2500.
The output should look like:
sample_1.txt : 1510:declare var testing sample_2.txt : 1610:declare var testing sample_7.txt : 1610:declare var testing sample_10.txt : 1710:declare var testing
I am running OpenSuse 11.2 on my desktop here in the office and when I download anything, other users are complaining over very slow internet speeds. My download speed seems to be the same as other users using Windows, but downloading from a windows machine does not cripple the network. So is there something in my network setup that can be tweaked so that I do not cripple the network when downloading ?
I am an intermediate linux user. However, I know nothing about solaris. I am trying to install Debian Sparc on a sun blade 2500 workstation. I was told it should work. I am able to go through the debian installation process but when the box reboots it does not boot into Debian. I have now gone through the debian install process several times and now it saids there are too many primary partitions. I tried a rescue install but it saids there are no partitions installed on disk? What am I doing wrong? I am curious if I need to pass a specific argument at the command line to boot into silo? I cannot find any relevant guidance online about this problem and I cannot believe I am the only one to stumble here.
When trying to install Debian 6.02 from a boot cd, the boot halts with the error message Kernel panic - not syncing: No init found. Try passing init= option to kernel. In looking for a solution I see a great deal about this problem occurring after messy upgrades and the like, but when when booting from a cd downloaded right from the debian website.
Is there a way of resetting all of the network settings to standard, as if a fresh copy of ubuntu had just been installed? The resulting discussion trouble-shooting the OP's specific problems were detailed and informative, but failed to answer the fundamental question:
I am unable to do my network setup. I have a lan connection. I used to easily setup it in windows xp in network connections > internet protocol > properties. But I do not understand anything in linux. I have installed latest version of open suse 11.1 and KDE environment. Secondly I am unable to play mp3 files on it and I do not hear any sound at startup too. I *945* motherboard with a inbuilt realtek lancard and it is working fine on windows.
I have squid on my RHEL5 server and a no of windows clients ,on clients some sites opened without any error but some sites whilw opening says unable to resolve hostname ,why this kind of problem ?This may be DNS problem ,but it should happen for all address not some .
i have changed the network/internet tool on ubuntu 9.04 to wicd which now doesn't work, ethernet or wireless connection how do i change it back to whatever the default is?
I had been manually starting my wireless network with "sudo iwconfig wlan0 essid "my wireless router id". The network would start and work flawlessly for weeks at a time. I can't ask my wife to find the essid in the terminal and then start wireless manually when I'm not here. She hates and fears the terminal. So I downloaded gnome network manager for a point and click interface on gnome panel.The network would start fine but shut down after anywhere from one to six hours. It would then refuse to restart manually or otherwise. I completely uninstalled network manager and tried wicd instead. The same basic problem is happening. The network will restart if I reboot the computer. My system:
Desktop computer acting as proxy server for the internet. Internet connection is by a dial up modem. This computer uses a wireless pci card connected to a dedicated hub. This is for file sharing via nfs. The OS is ubuntu 9.10. My wife's computer sharing the internet using a proxy to my computer. File sharing via nfs and a wireless card. Also running ubuntu 9.10. This same basic system worked flawlessly under Ubuntu Hardy.My desktop was updated recently with new hardware which created the need to move to Ubuntu Karmic. Some hardware was too new for hardy to deal with.
I am having a recurrent problem with my nfs server. That server hosts our homes which are exported over the network this way:
Code: # more /etc/exports /home/export*(rw,no_root_squash) and our clients mount their homes this way (in /etc/fstab): Code: myserver:/home/export /home nfs defaults,auto 0 0 Regularly the clients are getting stalled, no connection with the nfs server. When I check the logs on the server I see these lines: [Code]....
Seismicmike here. My first post. I'll try to be as clear and concise as possible. For the sake of this post, I'm going to use 1.2.3.4 as a place holder for my public IP. On my web server, I would like to be able to access the /var/ftp directory through a web browser. I have successfully done so with Google Chrome, but I cannot access the directory in Firefox or IE. Both FF and IE ask me for authentication but then time out attempting to load the directory.
I suspect that there may be something up with switching to passive mode and/or that this issue may be more with my configuration of Firefox and not with the server (seeing as how Chrome works). Another possibility may be related to SSL. When I connect with FileZilla, I have to use the FTP over Explicit SSL/TLS option in order to connect. In any case I still would like to fix it. I would also like to avoid having to install FireFTP if at all possible.
Steps to reproduce (not that you can without my actual IP =J):
* Open Chrome * Go to ftp://1.2.3.4 * Enter username * Enter password
I am experiencing serious trouble with my nfs server at office. That server contains the home directory which is exported to all our desktops. Since a few days now, it gets freezed and thus our desktops as well. I found a way to unfreeze it by pushing the power button, the server does not reboot but instead open the boot popup, i then click on cancel. I checked the dmesg file and found these messages:
I am currently trying to replace my Windows Server with a CentOS 5.3 box running nfsd for file serving. I have it all up and running however I cant see anyway of securing user access rights to the shares as all you need to access them is just clone the User ID of a user authorized to access the share of any Linux system which seems a bit insecure to me? I was wondering if there was any advice on securing access to server shares in CentOS.
I run a molecular biology lab and we like to run the "Molecule" GL screensaver in order to look cool (I know it doesn't actually save screens, and it wastes energy, but you know..). I'm about to install Opensuse 11.3 on all 24 of our laptops and I find that the number of GL screensavers installed as standard is greatly reduced from previous Opensuse releases. Any idea where I can get the "Molecule" and other screensavers?
I am running KDE and have the following relevant packages installed: kdeartwork4-screensaver xscreensaver xscreensaver-data xscreensaver-data-extra gnome-screensaver gnome-screensaver-extra This apparently gives me just 8 GL screensavers - there used to be a great many more?
I'm trying to enable a VNC connection from a Windows machine to remotely connect into my openSUSE machine (11.2, KDE, 64-bit), but I cannot get any desktop environment to load up at all. It just comes up with a blank screen and a black cross for a cursor. What I want is to be able to see exactly what I would normally see if I were sitting in front of it, rather than go into a 'virtual desktop' as appears to be the case. Ideally I would want to go into the KDE desktop environment in this instance, and it would also be nice if dual monitors could enabled for each remote session. How do I go about enabling my chosen environment?
If it makes any difference at all (although I doubt it does), I'm also using PuTTY in Windows in order to make an SSH tunnel to allow secure access, and I'm quite sure I've enabled all the necessary services for all of the above under the YaST Firewall (by the way, on a lesser note, do I need PuTTY to be installed at both ends for the SSH tunnel to work properly?). If you need a screenshot or output from terminal of sorts this can be arranged.
