I just don't get it? I've attempted multiple times to get the knetworkmanager to connect to an unencrypted network, yet it keeps asking for a wep key. However the networkmanager in the Gnome version connects to unencrypted networks just fine. Why won't knetwork manager do the same?
View 9 RepliesSince two week the knetworkmanager needs 3 minutes after login to start and connect. On an other computer (x86) it works fine. What could be the reason for this? I use opensuse 11.3 x64 and yes i need the network manager. Ifup isn't practicable for me.I have read in some thread to start the networkmanager at boot time and as root, but i don't think this is necessary.
View 9 Replies View RelatedI am using Nokia x2-00 phone. I am able to connect to the EDGE/GPRS using Blueman. However, if I use the USB cable along with KNetworkManager with the same dialing number and APN I am unable to connect. What might be the cause?
View 2 Replies View Relatedat start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
I am running openSuse 11.2 on Acer Turion64 x2.
My wireless card is "Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)".
For some reason, networkmanager can not connect to network at all.
In NetworkManager log, it is showing "kernel: [ 28.002378] ADDRCONF(NETDEV_UP): wlan0: link is not ready".
I try to find out why it can not connect to network by using knetworkmanager.
I am using a fully up to date openSUSE 11.3 and today, I decided to upgrade my KDE 4.4.4 to Factory. The update went without a hitch, everything continued to work, including all of the items in my workspace.So now I am running KDE 4.4.95 and it looks nice. I like the new System Settings where the advanced tab is gone and everything is presented in a single window.
The only snag I have hit so far, is that Knetworkmanager no longer displays the network that I am connected to when I right click its icon in the tray. The screenshot may make clear what I am talking about.I am currently connected via a wireless network, which nm-tool confirms. However, it is not shown in the Knetworkmanager menu.
Since my update to OpenSuse 11.2 knetworkmanager refuses to connect to WEP enabled networks (worked fine with knetworkmanager 11.1). I am sure that I use the correct password and I tried on 3 different networks. The manager is connecting to open networks and WAP protected networks without problems. I saw on other forums that there were similar problems with previous versions of networkmanager. But I could not find a solution for my problem.
View 9 Replies View RelatedEven though I am not new to Suse, I am still very inexperienced, especially when it comes to wireless. I am running Suse Linux 11.3 and I am having problems connecting to my wireless. My network controller is a RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01). I am recieving a signal from my wireless router, however when I try to connect to my ESSID via KnetworkManager It asks for a WEP key. After entering the key, Knetnetwork manager will try to connect for a minute or so and then it will ask for my WEP key again. It keeps repeating this cycle without ceasing. How to configure the WEP so that Knetwork manager will connect or a way around WEP.
View 5 Replies View RelatedSince 11.2, I am using Knetworkmanager for getting connected to the internet.But is getting disconnected on its own every now and then. I used Kinternet when I was on 11.1 and it worked fine, Infact I would prefer kinternet over knetworkmanager anyday. But in suse 11.2, having both KDE3 and KDE4 libraries does make system work unexpectdly. I tried installing Kinternet once but after that kontact kept crashing (because of clashes between kdelibs3 and kdelibs4).Can anyone help me finding out the problem in knetworkmanger.. here is entry in /var/log/NetworkManager when I got disconnected..
Code:
Jan 31 14:38:27 linux-9psh NetworkManager: <info> (ttyUSB0): device state change: 8 -> 7 (reason
[code]...
How do I figure out what to enter into the fields when I set a static ip in KDE? Other network managers give you suggestions but knetwk does not.
View 9 Replies View RelatedI'm configuring a computer for someone and I don't know the wireless network they will be using. (They are not technical.) I've setup networking to use NetworkManager. It works just fine.However, Knetworkmanager won't startup at boot/login. Therefore, the network doesn't startup automatically. I have to click on the icon in the menu to start it.That works well, but it should be configurable to startup automatically.I've searched this forum for answers and don't find any good ones. It seems there isn't an answer or there is a bug in KDE 4.x. (I'm using KDE 4.3.x)
View 9 Replies View RelatedI made a brief foray into IceWM g which I used tradition ifup" instead of KNetworkManager. I switched back to KDE and even though I have re-enabled "user controlled with network manager" KNetworkManager still doesn't run at KDE login. The connection's fine and I can start it up myself and it works.What is the best way to set it back to run at login so I'm automatically connected to the network?
View 9 Replies View RelatedI've my OpenSuse installed both on laptop and PC.
The kNetworkManager works well on the laptop both on user account and root account. It connects to my mobile broadband fine.
The problem appeared on my PC. When I log into root account - everything seems to be fine, It connects through knetworkmanager - The cellular connection gets activated, I see X and a heart near "Activated". root account reads my DNS'es from resolv.conf
When I only log into the user account (not as root), the knetworkmanager connects - but as I've checked - it seems that it doesn't use the DNS adresses I've entered in resolv.conf (netconfig_dns_policy is set to "") so I can manually add openDNS to the resolv.conf). It just connects -
I did CHMOD the files resolv.conf and config in sysconfig/network - no luck.
The only way to bypass this is logging to root first - connect there, then switch to user while staying connected... but I think it's an annoying solution.
logs contain this when connecting from user account:
Code:
May 16 10:30:52 jaychyl-1-linux pppd[24965]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
May 16 10:30:52 jaychyl-1-linux pppd[24965]: pppd 2.4.5 started by root, uid 0
May 16 10:30:52 jaychyl-1-linux pppd[24965]: Using interface ppp0
May 16 10:30:52 jaychyl-1-linux pppd[24965]: Connect: ppp0 <--> /dev/ttyUSB0
[Code]....
All of a sudden the Knetworkmanager icon disappeared from my panel and when I try to start it from a console I get the following output.
ion@linux-4cfs:~> knetworkmanager
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc
[code]...
I am running 11.3 on a desktop and knetworkmanager used to startup upon login.However recently, knetworkmanager do NOT startup upon login. have to manually start the application from the menu.YaST / Network Devices / Network Settings / Global Options Tab is all the while set to "User Controlled With NetworkManager"I've even updated to KDE4.5 but the problem still persists.Any idea what can be done to get knetworkmanager to startup upon login?
View 9 Replies View RelatedThinkpad Edge, Intel Version, OS 11.3, KDE 4.5.2after my notebook shut down (due to a low battery) when I was just using Knetworkmanager to add a new W-LAN connection, I can't start Knetworkmanager anymore. Terminal output is:
Code:
~> knetworkmanager
Connecting to deprecated signal
[code]...
For one of the users on my system, knetworkmanager abruptly ceases to autostart once on a while. This happens once in roughly 10-15 days. When that happens, i have to go into .kde4/share/config/networkmanagementrc and manually toggle Autostart=true (from false). This trick works for another 2 weeks or so, before the value of "Autostart" automagically changes to 'false' and i have change it again.I dont mind doing it manually, but the user in question is my mom, and she does not have the know-how to do it herself when i'm not around.
View 7 Replies View RelatedI have a strange effect here, where konqueror is started multiple times. It is no problem to start it from the K-Menu. But konqueror seems to be associated with different actions in applications, e.g. many "help" entries; among others e.g. Inkscape: "Hilfe/Inkscape Handbuch" (~ Help/Inkscape handbook") If I'm unfortunate enough to hit such an item, the konqueror items start flooding my task bar, while the mouse cursor - changed to the konqueror icon - is flickering like wild, while konqueror is starting again and again. None of the windows really open and all icons disappear after some time. (due to some resource overflow, but unfortunately I can't find the relevant log entry this time) How can I prevent this ? (Or debug this, if the cause is unclear)
View 7 Replies View RelatedStill a flawed KnetworkManager in the released 11.3.No user control for cabled 10/100 lan ports. Yast config for the eth0 says it can have usercontrol by networkmanager. Oh no it doesn't.It seems to cater for wi-fi users only who get a "enable wireless" tickbox and "manage connections". At least you can stop and start it.Meanwhile cable users who might have a taskbar display for lan traffic can see stuff pouring in, or out and if it's something they don't want they can't do anything about it unless they pull the plug.
View 9 Replies View RelatedI've run into a situation where knetworkmanager tells me networking is disabled. If I switch to the ifup method in Yast then I can get online but when I switch back to user controlled knetworkmanager tells me that networking is disabled.I've actually had this happen twice.The first time I somehow managed to get it working again (I thought it was by right clicking on the icon in the system tray). This time I don't see the same option.Has anybody got any suggestions on how to get knetworkmanager working again.
View 9 Replies View RelatedAfter switching from KDE to XFCE, knetworkmanager doesn't automatically start when you log in. If you open it yourself, you magically get internet. How can I add KNetworkManager to the programs automatically started by XFCE?
I'm on 11.3
kde knetworkmanager is not starting on startup.i am starting this manually every time on login to connect to network..how to make it start automatically?
View 9 Replies View RelatedI have experienced amarok crash after which i am not able to bring it back to working state. I tried to reinstall it multiple times from standart playground and kde KDE:UpdatedApps repositories. Every time. i start amarok it hangs on splash screen consuming 49% of CPU with no signs to load completely. I guess i need to clean reinstall with deleting all tracing info form previous install?
here's output from console:
Code:
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
101003 11:21:54 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
InnoDB: Restoring possible half-written data pages from the doublewrite
[Code]...
Just installed OpenSUSE 11.2 and I have to say it feels great.Only gripe I currently have is the NetworkManager that is starting up very slowly. When I have logged into KDE KNetworkManager applet says that NetworkManager is not running and hence I have no network connection. This is fixed if I start NetworkManager (as root) or just wait a couple of minutes. I have one ethernet interface only, no wireless
View 4 Replies View RelatedI have built 11.2 on several laptops and knetwork manager startup for wireless is not consistent. I can't figure it out. Sometimes the options "Create Network Connection" and "enable wireless" are greyed out. Other times they are fine. What is the secret to getting the options to appear in my window tray all the time? I always select knetwork manager as the default when I do a clean build.
View 3 Replies View RelatedI have an open WEP wireless internet connection with a security key. KNetworkManager can never obtain an IP address from my wireless router, but I know that the router works because Windows can connect correctly and Ubuntu's NetworkManager can connection correctly. Does anyone know what is happening? KNetworkManager just asks for my security again and again and again after it fails to connect.
View 8 Replies View RelatedI updated my NetworkManager from version 0.9svn1128615-2.2 /opensuse/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/i586/) to the newest version 0.9svn1128615-138.2.The result was, the after reboot an error message occured, saying that the KNetworkmanager is not working and it would be not able to start the program !Did anybody else have the problem with this newest version?
View 2 Replies View RelatedI have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings:
1. Make a new GSM Connection in kNetworkManager and enter settings there
2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to ""
3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
I have a machine running Xubuntu [2.6.22-14-generic]. I have been trying to get this machine connected to wireless for ages, and I'm having another stab at it. So far I have install ndiswrapper and loaded the driver for a Linksys wireless adapter. The output of 'ndiswrapper -l' reports:
Code:
wusb11v4 : driver installed
devoce (13B1: 000B) present
So as far as my newbie knowledge goes, I believe that step to be completed, correct?When I turn on the machine is type in
Code:
sudo sh
modprobe ndiswrapper
to get the card running to where it will appear in the iwconfig dialog.The commands 'iwlist wlan0 scan' will list all the wireless networks around me, but I have been un-able to connect to any network, even unencrypted ones. I have tried to connect both through Wicd and command-line to no avail. For command-line I have used:
Code:
sudo ifconfig wlan0 down
sudo dhclient -r wlan0
sudo ifconfig wlan0 up
[code]....
With the final 'dhclient wlan0' commands, the following is returned:
Code:
There is already a pid file /var/run/dhclient.pid with pid 134519120
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium
[code].....
I have attempted to go ahead a step further and connect to an encrypted wireless network, however, I receive the same message, as well as another error message upon trying to enter the key, with the following code:
Code:
iwconfig wlan0 key s:"thekey"
Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument.
Here is a situation I have never come across (though I have only been using linux since 2004).I am running ubuntu 10.04 and using Wicd Network Manager.I can connect to my WPA encrypted home network, but if I go to my coffee shop to use their unencrypted wifi - I cannot.Even using the terminal. I think it is the way the device sees the network - but I don't know how to fix it.I have a screenshot with wicd here:And one with connecting to the essid here:Afterwhich, dhclient was unable to obtain an ipaddress - just like wicd above.
My iphone connected to this network easily without encryption or needing to use the browser to authenticate, etc.Any ideas on how to fix this?Specs:Samsung NC10lspci:
Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[code]....