OpenSUSE Network :: Ssb Driver Not Blacklisted Correctly
Aug 5, 2011
I've just installed Opensuse 11.3 on m Dell Studio 15, and am having problems getting the wireless card to work. I've installed the proper driver (I think), using ndiswrapper, and have blacklisted the conflicting driver (called ssb) to the 50-blacklist.conf file in /etc/modprobe.d/. My problem is that the ssb driver is still appearing as an alternate driver when I use the command ndiswrapper -l in the terminal. Where do I go from here? Am I correct that the ssb driver is not blacklisted correctly?
View 8 Replies
ADVERTISEMENT
May 7, 2010
Took my laptop into the computer shop for a format and asked what they thought of Linux etc, they suggested i tried Ubuntu and installed it for me.Ive been searching around trying to get past the fact that my graphics card is black listed so i can enable effects but am having no luck, im not to worried about flashy effects like the cube but i would like to tidy up my desktop as it is very cluttered with the original setup im not sure how to post a screen shot but all the icons are very big and un-appealing.would love to simplify it all and maybe have the window navigator along the bottom.Im not to confident with using the Terminal, but have had a go at Compiz-Check etc and some random commands.
View 9 Replies
View Related
May 19, 2011
I have a fresh install, everythings working great, just trying to get my vhosts working, i set them up in yast, but all the requests just go to the second vhost.
View 2 Replies
View Related
Feb 17, 2010
I have a problem to correctly configure apache / subversion and mod_dav in openSUSE 11.2 I have setup a virtual host on my home server (because I need to access it from the Internet), that should be a subversion server. The subversion root directory is the
Code:
/srv/svn/repos
I plan to use a separate directory for each project.
So, the svn tree will be/srv/svn/repos/project1/....
/srv/svn/repos/project2/....
/srv/svn/repos/project3/..
Apache serves the web pages (actually the directories) but since the documentroot and the SVN root are the same, it cannot handle the SVN repositories correctly. So, I re-read the Setting up a Subversion server using Apache2 - openSUSE how-to and followed it's suggestion. (Use a Location outside the document root) Anyway, the problem is that I have a 404 error, which of course is normal, since there is no alias set for the /rep location I use.
[Code]...
View 1 Replies
View Related
Nov 27, 2010
I have a hp zd 7000, i really like this laptop, the onboard ethernet will not work at all. i purchased a dynex wired ethernet pcmcia card to get on the internet with. i have had no luck getting on the internet with it it will light up so i am getting power but no transmitting light works at all i have three net work cards listed in the system. one is the wireless. and the other two are the wired eth0 is the onboard and eth2 is the dynex what can i do next to determine the problem i do not use the wireless at all.
View 1 Replies
View Related
Oct 31, 2010
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies
View Related
Mar 31, 2011
I have a problem with getting the picture to display properly on my HDTV. Using the regular driver (whichever that is) the picture displays flawlessly, but when I'm using the NVIDIA driver it displays really weird. URL...As you can see the top and the right of the picture is missing, and there is a large black bar to the left of it.Since it only does this with the NVIDIA driver I guess the driver is at fault here. The graphics card is a 8400GS and I'm running Xubuntu 10.10. The HDTV has a native resolution of 1366x768, and I've connected to it using HDMI.
I have tried messing around with overscan compensation in nvidia-settings, but it didn't help much.What can I do to fix this?
View 5 Replies
View Related
Feb 6, 2011
After a fresh install of Slackware64-current could not get X to start correctly with the nouveau driver. When ever X started display was scrambled. Only kde would partially work with desktop effects enabled, but very slow. Without desktop effects enable kde was also scrambled. After trying several things and googling came up with the following. To get X to work created a nouveau-kms.conf file in /etc/modprobe.d with the following text.
Code: options nouveau noaccel=1 The one draw back to this solution is that Kde will not start with desktop effects enabled. Hopefully this will help someone else with similar problems. Maybe someone else has a better solution. video card: Nvidia Geforce 6150se nForce430
View 8 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
Mar 7, 2011
The Fedora 14 (and 13) pwc Philips Webcam Driver.is only supporting 160x120 resolution (and nothing higher such as 640x480). Also not supporting some other things correctly, I suspect.I say so having tested multiple web camera software and either they don't work (because they have no setting for low res) or they do work if settable to low res., but not for any higher res.I also have a working setpwc tool which shows the driver does not support framerate resetting.I have a Toucam and Toucam Pro - same for both.Also these units worked fine under Fedora 11, and under earlier versions even Red Hat 4.But I usually got the latest pwc from Saillaird.org and compiled it to get full support but there are no more current sources there anymore, and the older ones don't compile.But as I am saying under F11 it was fully correct, now under F13 and 14 it is broken.
View 14 Replies
View Related
Mar 12, 2009
HP TouchSmart IQ500t
NVIDIA GEForce 9300M GS HD
Intel Core 2 Duo Processor T6400
Linux REL 4 64 bit OS
Tried installing latest NVIDIA driver (NVIDIA-Linux-x86_64-180.29-pkg2) from NVIDIA website for this video card, and the display was not appearing correctly. There was a lot of garbage at the top of the monitor. Half of the desktop screen was missing.
View 1 Replies
View Related
Aug 24, 2010
I am trying to get the graphics working correctly on an old HP Compac d220 mt machine that has an Intel 82845G Graphics Controller.
[Code]...
The latest driver I can find is: Intel(R) Graphics Driver - Linux*[IntelGraphics_060704.tar.gz] dated 12/17/2004 Version 20041217 When I started to install this driver I got a message that said that it was compatible with kernel version 2.4.(+ numbers I don't remember) So I stopped the installation. My question is what will / could happen if I go ahead and try to complete the driver install? Will I hose the entire system? I am fiddling with the kernel if I continue to install the driver.
IF it does break, would it be possible to undo the driver install using the text based root console with networking via the recovery option or will that too be inoperable if I hose the system. Should it break and I can get to the recovery option and open a terminal. How would i uninstall it? I am just getting reacquainted with Linux again after 20 years. I am not using the advanced package management tool to install the driver. The driver has it's own installation script. (have not looked to see if it has an uninstall script in the file list) I won't be able apt-get remove or dpkg purge anything.
View 1 Replies
View Related
Feb 13, 2010
In new Acer Extensa 5635G i install 11.2 but lan card don`t work,wireles too!Hеrе info
Code:
/sbin/lspci
07:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
09:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
/usr/sbin/hwinfo
[Code]..
View 5 Replies
View Related
Aug 6, 2010
I ran into a problem that seems to be related to: [URL] with an HP Desktop. The desktop has a Intel 82567LM-3 on board gigabit ethernet adapter which on a fresh install of 11.3 would not operate properly. The e1000e driver was properly detected however on loading, the ethernet interface was never initialized. My solution was to get the latest e1000e driver from intel.com: Network Adapter Driver for PCI-E Gigabit Network Connections under Linux*
[Code].....
View 3 Replies
View Related
Oct 21, 2010
I'm using openSUSE 11.3 and i access internet through usb-stick.
Before inserting my usb-stick, i generally remove the usb-storage module driver by this command:
modprobe -r usb-storage
But after this command, i get an output saying that usb-storage is built in and cannot be removed.
Can anybody help me how to remove that module. It works well under ubuntu and Mandriva.
View 9 Replies
View Related
Jan 11, 2010
I recently became co-owner of a server, however upon trying to ssh it became apparent the root admin gave me the wrong password by mistake;
After trying several times with the wrong pasword thinking I might have mistyped I have now blacklisted myself, huzzah.
How can I reset or clear the blacklist?
View 2 Replies
View Related
Dec 9, 2009
i am testing the opensuse 11 installation on the Eee pc (Eee Box B202). My installation source is in the network drive but i can't seem to point it to this destination because the network card is not detected. This Eee pc is using a jmicron network card and i can't seem to find any related drivers on the net.
View 1 Replies
View Related
Aug 31, 2010
I have bought a new Dell Studio XPS Desktop with Broadcom BCM57788 network card. The installation of the tg3 driver from Dell was done according to Documentation
But still, the network card is not there. When I call ifconfig, there is only "lo" and no "eth". In Yast it says that the Netlink BCM57788 card cannot be configured because the firmware is missing. I also already did modprobe tg3 and rmmod tg3.
BTW, I have installed OpenSuse 11.2 x32 which is Linux 2.6.31.5.
View 6 Replies
View Related
Jan 10, 2011
Ok have setup my printer under suse 11.3 just fine and printing perfectly, and have added the printer to a windows 7 client, but had to get the disk to install the windows driver. Is there any way that i can put the windows driver on the linux machine so that when i go to a windows client and want to add the printer, i can just connect to the printer and the windows driver will be installed over the network like it does with windows servers?
View 4 Replies
View Related
Apr 22, 2010
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
View 2 Replies
View Related
Aug 19, 2010
I'm using Apache server's dos_evasive module to block DoS attacks. How do I see the list of blacklisted IPs? because I want to delete from time to time to monitor the IPs that are blacklisted, but do not know how to.
View 6 Replies
View Related
Oct 23, 2010
I'm trying to prevent a few modules from loading at boot, like i.e. bluetooth, sco, bnep, btusb, usb_storage and uvcvideo, so I blacklisted them in /etc/modprobe.d/blacklist.conf but they still get loaded. I've checked that I unload all of the ones depending on eachother so that shouldn't be the problem, I think. Does anyone know what I'm supposed to do to really prevent them from loading?
View 2 Replies
View Related
Jul 25, 2009
I need to use usbip to work with the webcam from another computer. But when I installed (using YaST) usbip and launch this, I see errors:
# usbipd
usbip err: stub_server.c: 433 (do_standalone_mode) open usb.ids
usbip err: stub_driver.c: 33 (open_sysfs_stub_driver) usbip_common_mod.ko and usbip.ko must be loaded
** ERROR **:
driver open failed
aborting...
Emergency shutdown
# usbip
usbip err: vhci_attach.c: 586 (main) open usb.ids
Usage: usbip [options]
...
View 5 Replies
View Related
Oct 20, 2010
I can't find a be2net driver for the emulex nc553i nic that is being used on the HP 460c Blade G7. I tried to build one from the src rpm provided on the HP site but it fails looking for a be_xmt function.
View 3 Replies
View Related
Dec 20, 2010
I have done a new install of Fedora 14 but the RTL8191 wirless card is not being recognised. Realtek have provided the driver source but the make operation is failing because (I think) Fedora 14 isn't provided with the kernel source to enable it to complete successfully.
Basically (in easy to understand steps): how do I download correctly the Kernel source to enable the driver make operation to proceed?
View 14 Replies
View Related
May 4, 2010
I have one major problem in my mail server. I am not able to send mail to other domain yahoo and rediff. and my ipaddress is blacklisted. So Finally I checked logs. Mail queue is high. Log shows spam and junk mail created in my mail server. he following are the logs. Iam using qmail server. One more thing is in link is there when I click that link its go sex websites. I will try all mail queue logs. It shows the same website redirection. So I don't know its happen. My thought is spam create from that website.
View 3 Replies
View Related
Sep 17, 2010
Am using atmail server but recently i have been facing the problems of spams which caused my ip address to be blacklisted to some dnsbl check. am using below dnsbl to filter spams to my atmail
View 1 Replies
View Related
Aug 11, 2010
I am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.
View 3 Replies
View Related
Jun 14, 2011
Although Im using SuSE since 7.2 this is my first forum post here. I just plugged in my iPhone with USB and 11.4 created an eth1 interface for the iPhone and also loads the ipheth kernel module. Anyhow I am not able to acquire an IP address using DHCP. The iPhone OS is 4.2.1 and its an iPhone 3G 8GB black
View 2 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
