I have updated using zypper from 11.1 to 11.2. Does this process update the boot/menu.lst file with an entry for the new kernel? Didn't for me.
Any rate, that's not really the problem. I have created a new entry in menu.lst to load the new kernel but I don't have a ramdisk image - all I have is a broken link initrd -> initrd-2.6.31.5-0.1-default
Where do I get the image from?
When I attempt to refresh my zypper repositories, I get messages like:
Repository 'gwdg_suse11.1' is invalid.
File /var/tmp/TmpFile.vRNflE doesn't contain public key data
I've asked for help (which has been freely given) on these forums before, but nothing has worked, and I've been stuck with this error for many months now. In effect, my system is effectively non-upgradable.
However, I would like to upgrade to 11.2. Is there an upgrade CD, or should I just download the 11.2 DVD (at nearly 5GB) and choose the "upgrade" option from it?
Is there a way to configure Apache so that if a user tries to access a webpage that doesn't exist under mydomain.com, that it redirects that user to the index.php?
View 1 Replies View RelatedA recent upgrade from 10.3 to 11.1 went remarkably well --however, Apache (integrated with osCommerce), was broken:
tall:~ # uname -a
Linux tall 2.6.27.29-0.1-default #1 SMP 2009-08-15 17:53:59 +0200 x86_64 x86_64 x86_64 GNU/Linux
[code]....
after I upgraded my SUSE 11.0 to 11.1 many problemes solved themselves. But now there is a new one.
I use openvpn, which always used to work without problems. After upgrading to SUSE 11.1 there is the error message:
"/etc/openvpn/client-suse.sh: line 7: modify_resolvconf: command not found
Wed Jul 7 00:11:38 2010 script failed: could not execute shell command"
The shell script is as follows:
Code:
#!/bin/sh
UPORDOWN=$1
DEV=$2
case $UPORDOWN in
up)
modify_resolvconf modify -s openvpn -p openvpn -t OpenVPN
[Code]....
I recently upgraded to Fedora 14. I tried installing gcc using yum. But it seems there is a broken link. I get the following result:
Code:
You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
So i tried using --skip-broken
Code:
If i try to install glibc, i get the following message:
Code:
I also tried to install it using Menu-> Administration -> Add/Remove Software, but i get the same error.
I'm running Ubuntu (4.10). Under '/home/.wine/dosdevices' there are several drive assignments (a:, a::, e:, e::, f: f::, etc..) that indicated "link (broken)". If I click on any of these it says to trash them. Somewhat afraid to do without conformation. Or should I just leave them alone?
View 1 Replies View RelatedI tried downloading flash from the official website and installing the rpm but it didn't do anything even though it installed properly. I tried looking for the 64bit flash but the download link is broken. Can I install a 32bit rpm of firefox?
View 3 Replies View RelatedI have 2 PC's running FC11. The server is sharing a path /raid/shared.windows and the other is mounting that path.
On the server there is a symbolic link /raid/shared.windows/dir that points to /raid/dir
The problem is that this link is broken when the viewed from the mount point on the other PC.
Is it possible that the link is trying to look at /raid/dir on the other PC, rather then on the server?
If so how do I fix it, such that the symbolic link is linked to the right directory on the server?
I reinstalled Linux, in a new Partition, just formatted. Now, when I try to install, or copy, into my /usr/local/"whatever" folders I just see broken links of the files (the little x in the right top of the file, I presume is a broken link).But when I see the file in nautilus, the files seems to be good. But the programs doesn't works. The programs I've been installing are NukeX and UV Layout. The weird thing is that the very first time I installed Linux everything worked smoothly. Since I formatted the partition I've only unistalled Noveau and installed the Nvidia latest drivers of my GPU.
View 2 Replies View RelatedI'm trying to install a BCM 4312 wireless driver following the Centos howto. Howtos>Laptops>Witeless>Broadcom
On step 3, compiling ... module.I get No rule to make target `build' Stop.When I go to the /lib/modules/2.6.18.194.3.1.el5 directory, the Build file link is broken.If i go to the link source /usr/src/kernels/2.6 ...x86_64 does not exist. The /kernels folder is empty.I think I need to reinstall the identified kernel in that directory and reestablish a link to it. but am not savy enough to do that on my own.
Ubuntu 10.04 32 bit
Background...
I was working with TeamViewer 5 just fine and then saw that TeamViewer 6 was available. I performed a complete removal of TeamViewer 5 via the Synaptic Package Manager and then did a clean install of TeamViewer 6 by executing the new deb file.
TeamViewer 6 was added to the Main Menu just fine, but after rebooting my laptop, the TeamViewer 6 Main Menu launcher was gone and a broken link was there in its place.
I have since followed the solution in the below thread to get a valid TeamViewer 6 launcher back in the Main Menu, but I cannot get rid of the broken link.
[URL]
In the System->Preferences->Main Menu window, the broken link is basically frozen. I can't hide it or delete it. Is there some file I'm just going to have to update to get rid of it?
i only need localhost for testing some phpnow i get[Wed Apr 28 18:44:57 2010] [error] [client ::1] Symbolic link not allowed or link target not accessible: /srv/www/htdocs
View 9 Replies View RelatedDoes anyone know is there any size limitation when doing RAMDISK under SUSE Linux?
View 9 Replies View RelatedHave such a question: how to set ramdisk size? Ramdisk: How do you install and set up Ramdisk under Linux (CentOS, RHEL, Fedora)? | Technology: Learn and Share
Here is some article, but somehow GRUB setting takes no effect, size is still limited to 100MB. I need to get ramdisk with size about 700-1500 MB.
I am trying to boot a ramdisk and am getting the following error:16384 ram0 (driver?)
16384 ram181 (driver?) No filesystem could mount root, tried:ext2 iso9660. Kernel panic - not syncing:VFS:Unable to mount root fs on unknown-block (1,0)
This is RHEL5 so input the ramdisk_blocksize into isolinux.cfg:
DEFAULT linux
LABEL linux
KERNEL vmlinuz
APPEND initrd=initrd.img root=/dev/ram0 ramdisk_blocksize=1024 ramdisk=2969600 rw init=/etc/rc.d/rc.sysinit
[Code]...
How do I set up a 256mb ramdisk on opensuse 11.3 x86_64 ? - The /boot/grub/menu.lst content reads as:
# Modified by YaST2. Last modification on Mon Aug 30 11:33:28 EST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 0
timeout 8
gfxmenu (hd0,1)/boot/message
[Code]....
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
I thought of suggesting this application to those of you who like writing notes and making your notes funky by grouping them, posting links, dragging images, and tagging the boxes in whichever way you want. IMHO it's easy to handle it and has a sweet interface, so I guess it's worth giving it a try . If you're on openSUSE 11.4, you can download and install it by accessing this link: software.opensuse.org: Search Results.
View 9 Replies View RelatedDoes anyone have a download link to OpenSuse 9? I really need it at work for compiling some native code and I can't find it anywhere.
View 4 Replies View RelatedSo after deciding to upgrade the existing fedora install on my laptop from 11 to 12, I decided to use the preupgrade method. After grappling with the boot space issue by clearing out an old kernel that was deemed safe to remove by the python script on the preconfig wiki page and then using tune2fs, I left the computer to do it's thing, periodically checking back on it. I come back to my computer, and after an apparent restart I see this message spat out at me:
Code:
ramdisk: incomplete write (3537 ! 5123)
write error
kernel panic - not syncing : VFS : unable to mount root fs on unknown block (0,0)
I need this laptop up and running for tomorrow and I would appreciate any help given. I have a Fedora 11 live CD running on the laptop and there seems to be an extra 210 filesystem present with the folders efi, grub, lost+found in there, as well as some config files, elf-memtest86+-400, what seems to be .img file amongst other things. If necessary, I can provide a screenshot.
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies View RelatedI know this is a very silly post, however I just can't find the link to download a previous version of Open SUSE.if someone could direct me to a page where I can download the Open SUSE 10.2
View 1 Replies View RelatedIs there a link to download a version of Suse with either kernel 2.6.26 or 2.6.28? For some reasons I have, I need one of these kernel versions. The newest download here, 2.6.37, won't work for me.
View 9 Replies View Relatedi have a usebe Wireless TL-WN321G and i search driver for him and how i can install it without connection on the internet.
View 9 Replies View RelatedWhenever I try to install an .rpm by double-clicking on it, a window comes up with this error:
'The name org.freedesktop.PackageKit was not provided by any .service files'
There is a file called org.freedesktop.PackageKit.service in /usr/share/dbus-1/system-services, so I know that it exists. Why can't dbus find it?
Running openSuSE 11.2 with GNOME.
Disk 1 of my software Linux-raid mirror failed but not before breaking my OpenSuSE 11.1 (KDE 3.5) domU. Dom0 is also 11.1 and is working fine. I have another domU running a Novell fileserver and I think that is OK too.
Both domU systems have dedicated mirrored partitions and it seems the OpenSuSE guest was sitting on some sectors which went bad. The drive is on its way back to Seagate for replacement under warranty and the rest of the system is plugging along on the remaining 750GB Disk 0.
I want to somehow repair SuSE 11.1. The symptoms are that I cannot VNC into it remotely and can only get in via the dom0 virtual manager in YAST. It won't let me use the partition manager via YAST. It also randomly drops the vnc connection with dom0. YAST won't let me manage software either.
Putting the original DVD in the drive and rebooting doesn't do anything for domU guests. It is only visible to dom0.
I don't want to blow the whole thing away and start again anyway.
Is there any way to do an online repair via the shell?
Recently i add a lot of repositories for new apps but do0ing a zypper up after that left left many things broken ,first the my system has added 2 more entries in grub menu namely, opensuse 11.3 desktop-2.6.34.7 and opensuse 11.3 desktop-2.6.34.7-(failsafe) why are these added and now when I simply boot opensuse11.3 from menu though it starts but has no sound and typical errors shown .
Firefox is broken. how could I reach a stable state now I have these repos only code...