OpenSUSE Network :: UMTS: Can't Create A PPP Connection
Aug 2, 2010
I tried to build a PPP connection with umtsmon, but failed. I'm using a ZTE MF110 Stick. The reaction from my provider's support was succinct: "Linux untersttzen wir nicht." (We don't support Linux.)
The hardware seems to work fine, the stick shows a green light, and I sent a test SMS via umtsmon. The umtsmon interface successfully identifies my Provider, but does not connect.
Here is part of umtsmon debug output:
Code:
UIState::setState(6 -> 6)
##P4 t=133: ConnectionInfo:InhibitionCount ++, now is 1
##P3 t=133: TempSerialPort::TempSerialPort()
##P5 t=133: 0x75a6c0 = Query::setSerial(0x7fffece12a00)
##P3 t=134: Serial::openDev('/dev/ttyUSB2') as FD 8 - Serial instance
[Code].....
View 9 Replies
ADVERTISEMENT
Jun 7, 2011
I'm going to an area with no wired internet connection so I would gather information on if it is possible and how to make working the following configuration for an home network:
a wireless access point connected to a laptop (an old one with a centrino Duo) with a usb stick for UMTS connection to the internet it is possible to use the laptop for routing to the internet the requests (http, ftp, mail etc..) of the PC connected to the home LAN which software have I to install on the laptop?
View 9 Replies
View Related
Feb 17, 2011
sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies
View Related
May 26, 2011
Just replaced a working install of Ubuntu because i like GS over unity but i cant get my USB760 EVDO card to work. The usual fix of editing the cd.rules file and copying some information into modem.fdi does not seem to work on F15..
Also, noticed that when i attempt to create a broadband connection using network manager it allows me to go through all of the setup dialogs, but never actually adds the broadband connection.
View 1 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Feb 2, 2010
I can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.
I checked it via ifconfig -a, the last part (which is for vpn) is:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
View 2 Replies
View Related
Dec 31, 2009
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies
View Related
Feb 26, 2010
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies
View Related
Feb 25, 2011
I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
View 9 Replies
View Related
Jun 1, 2011
how to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies
View Related
Jun 7, 2011
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies
View Related
Nov 17, 2010
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
View 9 Replies
View Related
Feb 1, 2010
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
View 1 Replies
View Related
Sep 27, 2010
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
View 1 Replies
View Related
May 16, 2011
So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.
Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).
I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.
1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.
Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.
View 9 Replies
View Related
Jan 14, 2011
I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.
View 2 Replies
View Related
May 16, 2011
I'm new in SUSE 11.4. My problem is: I'm using Alfa AWUS036H card. It's recognised and I can establish connection to my network, but cant get to Internet. I can't surf the web cos Firefox tell me that connection is timed out. Now I'm confused why I can't surf the web even if I'm connected. Also, I trayed to instal linux drivers for this card folloving Ubuntu "how to" and it just dont work.
View 4 Replies
View Related
Nov 27, 2010
with the ifup method everything works fine. But now I bought a wireless card, so I prefer to use the network manager to manage my connection. On my computer I need a static IP for wired connection, so I created a new wired connection and I called it "wired connection". But network manager always connect automatically to "Auto eth0" and I can't find how to modify this connection. Setting "wired connection" as default didn't change anything, probably becouse it need me to unlock the default wallet... Now, another problem, I really don't know why network manager applet doesn't appear on system tray, but I'm sure that I'm using it instead of the ifup method.
View 9 Replies
View Related
Jul 6, 2011
I installed a simple VPN pptp. Works fine to connect to the linux server. However I would like to connect my other linux-server and (more important) my old Novell 6.0 server. Anyone have an idear what I need to change?
View 3 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Jan 24, 2010
Is there someone who knows how to create a RPM from netatalk 2.0.5. Or better has a URL to a RPM? I aske this because so fare I know there are no RPM's for opensuse 11.2 (or suse). I want to use this RPM in the susestudio this is because the version in the repositories don't work with snow leopard.
View 9 Replies
View Related
Dec 13, 2010
I cannot seem to create a tun device using ifconfig, even though the module is loaded, and the node tun is present in /dev/net and appears to have correct access permissions, trying to use nstx which requires the tun device. Only thing I can think of is adding an alias, but not sure where, since there is no /etc/modprobe.conf or /etc/modules.conf in SUSE 11.3.
View 2 Replies
View Related
Jun 27, 2011
I want to create a user on my opensuse 11.4 computer, for the sole purpuse of using it to access network shared data (eg samba, nfs, etc). This user must be in the "Users" group, but it must NOT be able to login directly on the computer, i dont want him to show up on the GDM users list at logon, he must not be able to login to a terminal, etc.
How can i add a user like that? must he belong to a specific group?
View 4 Replies
View Related
Nov 29, 2010
On my triple-boot-system with XP,Suse 11.3 and Ubuntu I can`t access the web with all the OS.In spring,I used an USB-stick to connect,and got it only work to connect with WindwsXP, not with Suse and Ubuntu.The stick was identified by Suse as modem and storage-capacity as well.Now,running a DSL-connection,only Suse and Ubu are connectable,but not the XP!
View 3 Replies
View Related
Dec 23, 2009
What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies
View Related
Jan 13, 2010
MySQL gets installed with root user by default, root user can administer every mysql database installed in the system. Question is how to create a new user that will not be able to administer all the databases in the system the way as root user is? Can it be done using webmin?
View 7 Replies
View Related
Apr 27, 2010
We have a ldap server which has been running for a couple years now, and I was told to make a fallback / backup ldap server. So should the old one fail we won't be officially screwed.
View 1 Replies
View Related
Jun 10, 2010
I have a domain name relik.ath.cx with a mud and an html page and now Im working on my own personal mail server preferably with the first email on it [URL].
View 6 Replies
View Related
Jan 27, 2010
I'm trying to enable a VNC connection from a Windows machine to remotely connect into my openSUSE machine (11.2, KDE, 64-bit), but I cannot get any desktop environment to load up at all. It just comes up with a blank screen and a black cross for a cursor. What I want is to be able to see exactly what I would normally see if I were sitting in front of it, rather than go into a 'virtual desktop' as appears to be the case. Ideally I would want to go into the KDE desktop environment in this instance, and it would also be nice if dual monitors could enabled for each remote session. How do I go about enabling my chosen environment?
If it makes any difference at all (although I doubt it does), I'm also using PuTTY in Windows in order to make an SSH tunnel to allow secure access, and I'm quite sure I've enabled all the necessary services for all of the above under the YaST Firewall (by the way, on a lesser note, do I need PuTTY to be installed at both ends for the SSH tunnel to work properly?). If you need a screenshot or output from terminal of sorts this can be arranged.
View 1 Replies
View Related
Jun 10, 2010
It is just 3 days that I am using Linux Opensuse 11.2. I got a problem with Internet connection: I have HUWAEI E1550 3G Modem, but I have no idea about using it on Linux OpenSuse 11.2. Now I use it Windows7, there is no problem, because there is a program and driver for modem.
View 1 Replies
View Related
