OpenSUSE Network :: Get PhpMyAdmin Going On Server 11.3?
Dec 20, 2010
Setup - PmaWiki tells me that for some reason openSUSE does not support the setupscript.
I have been following the The Perfect Server - OpenSUSE 11.3 x86_64 [ISPConfig 3] | HowtoForge - Linux Howtos and Tutorials but used for i586. Everything works fine, except i am not able to find a way to set a password to be checked by dovecot/pam, to enter a mailbox via squirrelmail. The args are set, but i simply can not find out where to set the password and username.
The password set in ISPConfig does not apply to the squirrelmail login for dovecot.
The general idea than was to get phpMyAdmin running, and set up passwords there...(i do not even know if that is going to work, but get phpMyAdmin to work would not be bad at all..)
So, to know how to set a password/username in/for dovecot would be fine also... (i've read all the wikipages like: AuthDatabase/PasswdFile - Dovecot Wiki but now i still do not know where and how to set them.
View 8 Replies
ADVERTISEMENT
Jul 15, 2010
i edit this file... Code: /etc/network/interfaces now it looks like that
Code: auto eth0 iface eth0 inet dhcp after the change I cant enter to local host with the browser and unable to log to PHPMYADMIN what i need to change to solve it?
View 9 Replies
View Related
Oct 25, 2010
Im using CentOs on a remote server. I've recently installed phpmyadmin but cant access from [URL] I checked the files and found only 3 folders in /var/lib/phpmyadmin -config / save / upload - all of them empty. Whenever I try intstall phpmyadmin again it just says its already installed and up to day.
View 2 Replies
View Related
Aug 22, 2010
I have 2 Servers
Server A running apache, php, phpmyadmin
Sever B running MySQL
Server A has IP of 192.168.1.110
Server B has IP of 192.168.1.120
I edited /etc/phpmyadmin/config.inc.php
To have these:
(This par was confusing to I just re-added the line above instead of searching for it all).
Then I set the MySQL vi /etc/mysql/my.cnf to comment out #bind-address = 127.0.0.1
There is another line that most of the guides asked me to comment out but I cannot find that like: # skip-networking
The Next closest match to that is: skip-external-locking
I will assume that is not it and leave it alone....
I keep getting errors for example: "Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly"
Another error was it canno connect because it is not accepting connections from the IP Address of my webserver...
View 2 Replies
View Related
Aug 22, 2010
I been going off old outdate guides and informaion around the internet and nothing is working
I have 2 Servers
Server A running apache, php, phpmyadmin
Sever B running MySQL
Server A has IP of 192.168.1.110
Server B has IP of 192.168.1.120
[Code]...
(This par was confusing to I just re-added the line above instead of searching for it all).
Then I set the MySQL vi /etc/mysql/my.cnf to comment out #bind-address = 127.0.0.1 There is another line that most of the guides asked me to comment out but I cannot find that like: # skip-networking
The Next closest match to that is: skip-external-locking
I will assume that is not it and leave it alone....
I keep getting errors for example: "Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly"
Another error was it canno connect because it is not accepting connections from the IP Address of my webserver..
View 2 Replies
View Related
Aug 15, 2009
I configured mysql in RHEL5.1 and I tested it , it workks well, but I wish to exploit it in graphical mode. Can you assist me to implement the phpMyAdmin for me to use it in graphical mode?
View 4 Replies
View Related
Jun 19, 2011
I installed phpmyadmin and when I tried to access it, it said:
[code]...
View 1 Replies
View Related
Dec 6, 2010
I'm running OpenSuse 11.3 on VitualBox on Windows7. I have installed Apache, and PHP without problems. Now I want to install phpmyadmin but I cannot do it.I've followed these instructions and also tried from here and here but I got this message(File) could not be saved, because the source file could not be readI have also tried YaST search, but it can't find anything.
View 3 Replies
View Related
Jun 11, 2011
I seem to have a working install of Ubuntu Server 11.04 (Samba running without issue on same machine). The lamp stack seems to be running fine as well. (Apache index.html page works, phpinfo() works, mysql works from the mysql command line.) I have installed phpmyadmin. After install I had to reboot the server (restarting Apache still said error in PHP and couldn't start). After reboot, the welcome screen comes up, but using root with password doesn't work. Using an admin user that I created with privileges in *.* doesn't work either. There are no errors on the screen, it just simply loops back to the beginning screen.
There is an error in apache2 error.log saying that it can't find the page [URL] which seems strange because you can bring up the welcome page, you just can't log into phpmyadmin with any of the created users that I made from the mysql commandline. I don't see any php errors in syslog (which is where the php errors are being directed) except a notice that CRON is running for some purpose for PHP.
View 6 Replies
View Related
Mar 19, 2010
I have install apache,php,mysql and then I have installed the phpmyadmin by issueing the command in terminal sudo apt-get install phpmyadmin
After this ,in my web brower i type... localhost/phpmyadmin ,it give the error message "Not Found
The requested URL /phpMyAdmin was not found on this server. Apache/2.2.12 (Ubuntu) Server at localhost Port 80"
View 8 Replies
View Related
May 15, 2009
i have apache, php, mysql, etc installed, and running.
Phpinfo displays properly, and i can even do a few simple database calls via databases i made from the commandline.
I try to install the phpMyAdmin package (i think its from RPMForge, but it might be from EPEL). The package installs without problems, yet when i attempt to go to localhost/phpMyAdmin, i get a 404 error.
Is there something i need to do with my apache configuration to make this work? There seems to be very little documentation on this package.
If there isnt anything i could do, i could go through and do it by hand, but i want to have the advantage of using packages for the automatic updates.
EDIT1: Ok, i reinstalled the package, and now i get a 403:Forbidden instead of a 404.
Again, localhost/phpMyAdmin.
View 3 Replies
View Related
Sep 16, 2010
I got this error when opening phpmyadmin, I check that my mysql is keep automatic closed.
#2002 - The server is not responding (or the local MySQL server's socket is not correctly config).
View 5 Replies
View Related
Jul 13, 2011
The past couple of updates have messed up my localhost phpMyAdmin application. After the update I get the following error. Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly.
I have the old files backed up and when I restore them everything is ok. Why doesn't the update work? I figured it had to be a path or permissions problem. I gave unrestricted access to all users on all files and it still does not work. I found a php script in a phpMyAdmin wiki and it gives me this: If a session could be started successfully you should not see any Warning(s), otherwise check the path/folder mentioned in the warning(s) for proper access rights.The current "session.save_path" is "/var/lib/php5". Session file name: "sess_dee3dp1j6takbdtpvl702nbcptdivh82". which seems to me to say everything is cool pathwise.
View 4 Replies
View Related
Nov 9, 2010
i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file
the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"
i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site
this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for
<VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)
[Code]....
why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)
View 8 Replies
View Related
Sep 26, 2010
I was trying to change table data in a mysql database. Phpmyadmin appeared to work ok but somewhere along the line something got screwed up. When I try to start Phpmyadmin now it quits in the middle of loading. Firebug underlines something that says 'mooRainbow undefined'. I've tried to apt-purge Phpmyadmin including dropping the php database and then re-installing it. It does the same thing even when I went from version 3. something to version 4. something. This leads me to believe there is something wrong somewhere else. I don't have a clue where to even start looking!
View 3 Replies
View Related
Jun 1, 2010
I setup opensuse 11.2 with lamp. I then installed the lastest version of phpmyadmin. All works great except I get an alert at the bottom of my phpmyadmin login page along the lines of "...cannot load mcrypt setting" I created a phpinfo.php page and I don't see any info on mcrypt. Doesn't appear to be installed. Is this an issue with my lamp setup or with phpmyadmin. I have read differing views. Some say its related to php others to phpmyadmin. Can anyone give me instruction on how to install and, if needed, configure mcrypt?
View 1 Replies
View Related
Apr 18, 2011
I am just configuring my PC for learning php. If I install phpMyAdmin from rpm, it works however if I download it manually and put in /home/user/public_html/phpMyAdmin and then browse [URL], I just see a blank page. What is the reason?
View 7 Replies
View Related
Jul 27, 2011
I've downloaded and installed Apache, mySQL and PHP via YAST. The web server is up and running and I am able to create and modify databases in phpMyAdmin. What's strange is that I am working on some other websites which use php includes to deliver my stylesheets, scripts etc. However, these includes do not work. I can view my website but all I see is the output from the html within the php file. Anything that is being delivered through includes does not display or run so all my content is unstyled.
View 3 Replies
View Related
Jul 23, 2010
My phpmyadmin stopped working. I reinstalled it and it gives error #2002. I found that this error is from mysql, which i couldn't repair and i begin to reinstall it. First I was with Debian 5.03, but i played with /etc/apt/sources.list and after upgrading
I have now 5.05
The problem is that when i install mysql-server a dependency appear in mysql-server-5.0. I follow this instructions[url] and after sudo apt-get install mysql-server mysql-client
I get this error:
Code:
How can i fix this dependency? I didn't find anything relative in google.
mysql-server-5.0 --configure gives error: command not found
I uninstalled all related with mysql and execute dpkg --purge mysql-server then reboot and run first apt-get install mysql-server-5.0 mysql-client-5.0 and then apt-get install mysql-server mysql-client There was no error
Code:
But there was another error when run mysql -u root -p
Code:
View 2 Replies
View Related
Nov 10, 2010
i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file
the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"
i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site
this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for <VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)
[Code]....
NB : my phpmyadmin is install on /usr/share/phpmyadmin with /etc/httpd/conf.d/phpmyadmin.conf as phpmyadmin configuration file
why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)
View 1 Replies
View Related
Jan 21, 2010
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
View 2 Replies
View Related
Feb 26, 2010
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
Sep 18, 2010
Summary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
View 4 Replies
View Related
Aug 5, 2010
I am trying to network a drive which is a USB drive. The directory is /media/My Book and I am at a loss on how to network it properly. From my laptop that has linux mint, I click on network and I see SFTP File Transfer on linux-8m03 but it can never seem to mount.
View 1 Replies
View Related
Jun 1, 2011
how to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies
View Related
Jun 8, 2010
When I installed OpenSUSE 11.1 on my server, at some point, I gave the server a description. Whenever I connect to any of the shares on the server, this description appears. For example, on one Windows workstation, there is a share which appears in Windows Explorer as "Midwest on 'Cincinnati Corporate ISS Server (ISS0042)' (T:)".
For the life of me, I cannot find where this description, "Cincinnati Corporate ISS Server", is stored. I've search through /etc, and poked around ad nauseum in YAST, but I am missing it. Where is this description stored? What is the YAST function to change it?
View 7 Replies
View Related
Mar 27, 2010
I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
View 9 Replies
View Related
Jun 19, 2010
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies
View Related
Apr 24, 2009
get phpMyAdmin work on LAMP installed on OpenSuse 10.1 !!
running: "rpm -q" command result:
apache2-2.2.0-21.7
php5-5.1.2-29.25.3
MySQL5.0.18
phpMyAdmin-2.9.1.1-2.3
webmin-1.360-1
My problem is when trying to connect to: "hxxp://www.m-y-d-o-m-a-i-n.com/phpMyAdmin" I reported Error 404: PHP Code: Object not found! The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again. If you think this is a server error, please contact the webmaster. Error 404
[Code].....
View 1 Replies
View Related
