OpenSUSE Network :: Establish NFS Mounts For SOHO NAS 500
Jul 18, 2010
I'm trying to establish NFS mounts for my SOHO NAS 500 as I used to with other versions of OpenSuse. I go to Yast, I find my SOHO server and my exported directory. I put rw for options and Add it to the list. When I exit I get the following from Yast in a pop up: YaST got signal 11 at YCP file Service.ycp:77/sbin/yast2: line 399: 13095 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS I am not an expert (rather basic knowledge) but this is really cryptic for me. Anyone knows what it is? Of course my mount doesn't work. My newly established system is working fine with 11.3 OpenSuse.
View 1 Replies
ADVERTISEMENT
May 16, 2011
I'm new in SUSE 11.4. My problem is: I'm using Alfa AWUS036H card. It's recognised and I can establish connection to my network, but cant get to Internet. I can't surf the web cos Firefox tell me that connection is timed out. Now I'm confused why I can't surf the web even if I'm connected. Also, I trayed to instal linux drivers for this card folloving Ubuntu "how to" and it just dont work.
View 4 Replies
View Related
Sep 25, 2010
Since a few days ago, I have too much problems to connect.When I try to connect to Internet with Firefox, the following message is printed out (, most of the times):Code:Unable to connect Firefox can't establish a connection to the server at URL...
View 9 Replies
View Related
Jan 15, 2010
t "Failed to Connect Firefox can't establish a connection to the server at127.0.0.1:3580." when I try to open a Help File of one of the applications I have.My /etc/hosts file has its entries right:127.0.0.1 hostname.hostdomain hostnameMy firewall is also disabled.
nmap -sT -O localhost
gives me (I have included some):
2401/tcp open cvspserver
[code]....
View 7 Replies
View Related
Jan 14, 2010
I mount a smb share in suse 11.2 like so mount //ip/share /mnt/point That's fine. It works. A few days later I find all shares I've mounted like that have mysteriously disappeared. I can't find out why, nothing in logs, no obvious causes. When I say disappear I mean its like something did an umount /mnt/point. They no longer appear in the mount list, they are no longer mounted, and I need to type in the mount command for them to come back.
I tend to leave the boxes running until they crash or need a reboot, and always have. This problem I've only seen in 11.2. I have a 11.1 and 11.0 boxes running too, and the mounts are stable on those. I can't find any references anywhere to this behaviour.
View 9 Replies
View Related
Oct 28, 2010
I'm trying to share two folders via NFS. First I share /media/disk/, that works fine and mounts on a remote computer as expected. Then I try to also share /home/Videos/ but when I add this folder to my /etc/exports I can't mount any of the shares. I have tried to both do it on command line and with the Yast tool but the result is the same. I have checked permissions on both folders and they are the same. Also if I try to share only /home/Videos/ it won't mount either. What am I doing wrong?
View 9 Replies
View Related
Sep 4, 2010
i do love to learn this stuff so i thing I'll give it a shot as far as setting mail, ftp, and other services i think i can manage. what i really has no clue of with where to begin is how to make this: there are foot computers, 2 of them need to access the net and 2 should not. of course, all of the PC's should be able to talk to the main server (the ftp, mail , file sharing server)so, where is my starting point?
View 2 Replies
View Related
Oct 7, 2010
I have a good grasp on windows server 2003 but I don?t want to pay outrageous license fees for software and services and clients. I am newish to terminal as I only know a few commands. I have no problem installing services for the server edition for 10.04. Its just understanding whats going wrong to troubleshoot. I guess there is you guys and I have good working knowledge of Cisco's IOS's so I understand things like routing tables and interfaces and such for troubleshooting.
Questions I have... Can I install the desktop version of 10.04 and just install the server services? I was looking at the server guide [URL] and would like to know if these can all be installed on the desktop edition without too much trouble. I would imagine one could just use the server edition but I would really want a graphical user environment for some of the activities, if not all that I can. This would be becuase on my skills in the CLI. I priced out a server from Dell. I fits my budget perfectly if I go the Ubuntu 10.04 route. I was wondering if anyone sees any conflicts with the hardware for the Ubuntu OS....
[Code]....
View 4 Replies
View Related
Nov 24, 2010
I have multiple ubuntu machines and I connect to one through an NFS share. I have done this for a few years without issue. However, since re-installing ubuntu and upgrading to 10.4 I have a problem with my system hanging when the remote shares are lost.
Basically, I can power down the machine downstairs, and my main machine then has a fit. I can not open any folders in ubuntu, nor can I shut down. If I try and shut down the system hangs, last time it hung for 8 hours before I had to kill the power.
These are the lines in my fstab
I don't know what I've done wrong, or how I can prevent this from hanging. I have googled the heck out of this as well and can't seem to find an answer either.
View 2 Replies
View Related
Feb 12, 2011
I have had long term access to a networked HP Photosmart printer but now I get the following message:
Unable to open device hp:/net/Photosmart_C5100_series?ip=192.168.0.161.
when trying to access it.The ubuntu desktop is wired to the router as is the printer and another iMac wirelessly can still print to the HP. HPLIP status shows the icon for the printer but with a red x indicating no connection to it.The only recent network change was the removal of another router from our network. (service is DSL via a combo modem/router from service provider which previously was connected to a Dlink router which has now been removed from the chain b/c was redundant to the modem/router)
View 1 Replies
View Related
May 25, 2011
For strange reasons I was stuck without an Internet connection for about 2 hours. I couldn't establish a connection, even local network only via DHCP. This was on Natty. After 30mins passed, I rebooted to Maverick only to get the same results. With nothing else to do, one hour after, I booted into Windows XP to play Dragon Wars 2. Lo and behold! I had Internet connection. At first I thought it was a technical problem with my ISP. So I rebooted hurriedly to Natty and after several minutes of trying to coax Network Manager for a damn fre*kin* connection it still couldn't.
Back again to XP, I couldn't believe that I wasn't experiencing some kind of on/off signal from my ISP. It wasn't just a coincidence that I could connect on XP and not on Natty. The connection was fine! And I've reason to believe for the past 2 hours, my ISP wasn't the culprit. .. this time it was on my end.Now - on Natty - I manually configured the connection (Instead of DHCP) to be greeted with the familiar Connection Established prompt from notify-OSD.
View 2 Replies
View Related
Jan 27, 2011
I'm trying to connect to a hidden wireless network in ubuntu through the terminal but i am unable to do so.
I first tried using ifconfig,iwconfig and dhclient initially but i am only able to get an ip address without the default gateway and dns server addresses which i normally get through the network manager applet.
Then i tried using cnetworkmanager but failed miserably again i keep getting this error
Code:
Another applet is running: Bus name already exists: org.freedesktop.NetworkManagerUserSettings (pid 1851)
Then i used nmcli available with the network manager package. i was able to establish a connection only with the connections showed in the list. i use a hidden wireless network. i am unable to connect to the hidden wireless network using nmcli without actually creating a connection from the network manager applet.
View 2 Replies
View Related
Jan 16, 2011
When ever i try to access 202.164.53.122 through ssh i get the following error message:
Couldn't establish connection to proxy: Network is unreachable ssh_exchange_identification: Connection closed by remote host
I have a account at 202.164.53.122.firewall is on.
View 1 Replies
View Related
Mar 31, 2010
I installed ubuntu Karmic Koala 2 weeks ago, and while I have been able to connect to my school wireless, I have not been able to establish a PPPoE connection (username and password).After my most recent try, following this guide:-karmic.htmlMy wireless connection has gone as well.My network manager applet shows my school network, and shows that it is trying to connect, but it cannot establish a connectionand i apologize in advance for any information that i am lacking. please let me know, and i'll try to get the information.I'm running ubuntu on a separate partition, alongside windows XP home.
View 2 Replies
View Related
Jul 19, 2010
I moved to static Ip method for my laptop. I edited the interfaces file and it seems to work since I am writing this message from that laptop, but I have a new problem with my Debian. The mounts are not mounted during the startup anymore. Before I was using the network manager method and the nerwork mounts were all fine. Now with this method, they are not mounted and I need to mount them by firing "sudo mount -a" manually.
View 2 Replies
View Related
Mar 19, 2011
Is there a way to access remote mount points that were created within the "Places" dropdown or within Nautilus? I haven't been able to locate a mount point for these.
I know I can create a mount point using fstab that will solve my problem but I was hoping for something using these automount procedures as it's really clean.
I just want a way to access these remote shares via terminal when created within Gnome.
View 1 Replies
View Related
May 4, 2010
Attempting to set up a Samba network from my SuSE 11.2 desktop to a windows laptop. Using YaST, a Samba server has been created, and allow users to share has been clicked. Identity is not a domain controller. no trusted domains have been set, and no LDAP settings have been set.
Right now, each computer can see the other over the network. When clicking on the network from windows, a window pops up requesting a user and password.
Konqueror sees both computers under smb://. It also has a window that pops up requesting user name and password. Where do I set up these user names and pass words?
View 2 Replies
View Related
Aug 28, 2010
I was logged in as root, made some changes to my users and think I may have inadvertently changed root somehow. Ever since then, my machine runs just fine, I can sudo, Yast, etc without any issues. (Root password is fine) but when I try to log in as root, the system changes the screen display, as if it's going to login, then returns me back to the login prompt without error. If I "ctl+alt+F1", I drop out to the console and can login as root, but cannot startx because the display is already in use.... So, I removed the .X0-lock, but still cannot get the GUI to load. (after running rm /tmp/./X0-lock, I get a fatal error, "can't establish any listening sockets..." "Ctl+Alt+F7" brings me back to the GUI where I am logged in as myself in Gnome) if I login with my user account, everything runs fine and all is well.
View 9 Replies
View Related
Jun 1, 2011
My kids each have an ipod touch. Occasionally I connect them to my laptop and use dolphin to pull the pictures off them. I've noticed recently that the ipods don't automount in kde. I know that they were mounting under suse 11.3 (kde 4.5); I can't remember whether they ever mounted under 11.4 (kde 4.6.3). Last night I needed to back up the ipods, and I found that I could do that if I booted into gnome (they mounted right up as volumes in gnome), so the issue seems to to be kde-specific.
View 9 Replies
View Related
Oct 29, 2010
Our organization uses OpenSuSE servers (NFS/LDAP/SAMBA/more...) and are in the works migrating all the workstations for users to SuSE from Windows as well.
I like how in windows the mapped network drives are all listed in My Computer. OpenSuSE has a similar "My Computer" that lists current drives, and general PC info (in KDE, which is what we use in the office). Is there a way to list mounted drives in here, so that users can easily find the network drives? I'm open to alternatives to listing it in SuSE's sysinfo page, as long as it doesn't mean telling my old school windows users, "oh yeah, all your network drives are in /mnt/shares/...they wont have a CLUE what that means. It HAS to be easy for them to navigate to.
My attached image is just a screen shot of SuSE's "My Computer" so you can see where I would ideally like to put the shares.
View 1 Replies
View Related
Aug 24, 2010
I bought a network printer, gave it a host name, address should be assigned by my cable or DSL router. Thats what DHCP and DNS is made for right?Now I will print to that printer from my (Lucid) Kubuntu box and resolve it by it's hostname.I can't ping it by printername, I can't ping it by printername.local.It works when I login my router, read out the IP address and hostname the printer registered at the routers DHCP-table and use that address.What can be done that a router transfers the hostnames it has in it's IP-table to clients upon DHCP resolve AND whenever a client get's a new IP-Address?
View 9 Replies
View Related
Aug 7, 2011
I have a dual-processor x86 box with CentOS 5 Linux 2.6.18-238.19.1.el5, mysql Ver 14.12 Distrib 5.0.77, and tons of storage space. I want to run a syslog solution on this box for a SOHO infrastructure. We've got routers, switches, Windows servers, other Linux boxes, etc. I've looked at syslog-ng, but it seems rather overkill, but I like the idea of storing logs in a MySql database. Is there anything I can yum install?
View 2 Replies
View Related
Dec 13, 2009
I've updated my openSUSE 11.1 to 11.2 using installation DVD. After that, as system boots, I started to get lines like:
Code: FATAL: Module jbd not found
FATAL: Module mbcache not found
FATAL: Module ext3 not found and so on with different modules.. and this exact string several times:
Code: WARNING: All config file need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Finally I get:
[Code]....
View 4 Replies
View Related
Apr 7, 2010
I would like to make a server in my home that could be used to backup old job files at a print shop that I work at, creating a low cost offsite backup for our backup server. It would only backup 30-200mb a night, depending on what size the various jobs are.
There are 4 workstations that backup to a network share hosted on a fileserver(tower). It only has a single TB drive, and now people are offloading files to this server to free there computer of disk space. This is going to be a problem once the "server" disk fails. The managment there will not pay a monthly fee for 500+GB of files we prob will never need, but cant delete. I was hoping I could create some sort of "online" backup hosted at my house. ( like amazon, carbonite but without the fancy gui)
After researching a while I can't seem to come up with a great solution (partly due to my lack of networking knowledge i'm sure!). I have a pfSense router, with VPN capabilities, and the router at work (Cisco/Linksys RVS4000) also can VPN. I would like to use linux as the server, I am in the process of learning Ubuntu. Also freeNAS via FTP is another thought, might be easier?
View 2 Replies
View Related
Feb 4, 2010
I have got different clients with different SOHO routers on sites (Netgear , Linksys, SnapGear,etc.) All those clients use VPN IPSec . As you know that those routers has many entries :
Tunnel name
key lifetime
Preshared Secret
Phase 1 proposal
Phase 2 Proposal etc.
I am trying to familiarize myself to use different VPN clients (a piece of software ), that will be installed on clients, laptops to access their work network from home. I came across a problem with Cisco VPN client V5.0.06 I could not find all the above entries. I know Cisco devices are proprietary, does that mean cisco vpn client is not compatible with those router?
View 1 Replies
View Related
Aug 1, 2010
If this gets moved I apologize for putting it in the wrong place...Purpose of server: RED GREEN ROUTER for SOHO or PARENTAL CONTROL Block known bad URL,IP... ie porn, malware, ads, others Block Good URL,IP if Desired by OWNER Scan mail protocols for viruses out and in if out is found log and mail MASTEROSSIBILTY??? scan all protocols in and out for viruses n block log out block log and mail MASTER a server build log and possibly a step by step assist for new users.Version of ubuntu server 10.04Hardware Gateway Pentium 4 2 network cardsUse of server RED GREEN ROUTER FIREWALL that blocks site list from shalla and my own list. general use would be for SOHO or Parental controlpick language...pick it again???...country...no...country for kb...kb layout...eth0(as RED)me it...timezone...HDD choice(i used guided-use entire disk)...user...proxy if needed(not for RED GREEN ROUTER!!!)...updates(i picked auto)...LAMP,openssh, mail server ...sqlpassword...grub...done
then
login as user/pass created in install
run following
[code]...
View 9 Replies
View Related
Mar 31, 2011
i must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
View 1 Replies
View Related
Jul 20, 2010
I'm trying to create a VPN through SSH but encounter the following:
Code:
[18:42:11]root@bronzhip:/home/casey# sudo ssh -w 0:0 97.**.***.221 -i VPN
channel 0: open failed: administratively prohibited: open failed
[code]....
View 6 Replies
View Related
Oct 17, 2010
I just got an error message and i have no clue what it means.Error: Unable to establish connection with FAM.Do you have "FAM" or "Gamin" installed and running?I installed the net cd of Lenny and it is up to date so I don't know whats up.
View 2 Replies
View Related
Jun 20, 2010
I have a headless server, running Fedora 13. I want to make a ssh tunnel to that server from laptop that is also running Fedora 13. Logging into that server over ssh works well, X11 forwarding also works, but I can't establish a ssh tunnel.
At the moment I was trying to connect two small python tcp sample programs, that communicate through port 8000. Running them both on my laptop works well.
What I am trying to do is that I am making two seperate ssh connections to my server, let's say it's address is myserver.com.
1) I make a 'standard' ssh connection to it
Code:
And run the server program
2) I open another terminal window and make the tunnel
Code:
3) I open 3rd terminal window and try to run the client program, that is trying to connect to localhost:8000.
If I understand it correctly, the client should now connect to localhost:8000, ssh would discover that and send that data to myserver.com port 8000. Then the server program on myserver.com is listening on that port and should get that data and send "hello world" string back to the client. Then the client should get that, print it to stdout and exit.
Unfortunatly all what it does is that it just hangs for about ten seconds and then says "connection lost" (timeout?)
I have tried other programs, they also timout.
By passing the -v argument to ssh it outputs:
Code:
When I try to connect the client it prints four more lines:
Code:
So as you see, it says that the connection times out..Also can anybody tell what the "Unspecified GSS failure." means? The possible break in attempt is caused by connecting to the server using the myserver.com address while being in the same local network with the server. If I connect using server's local ip address (ie. 192.168.1.xxx), the message dissappears.
View 5 Replies
View Related
