OpenSUSE :: Establish User Names And Passwords In Samba?
May 4, 2010
Attempting to set up a Samba network from my SuSE 11.2 desktop to a windows laptop. Using YaST, a Samba server has been created, and allow users to share has been clicked. Identity is not a domain controller. no trusted domains have been set, and no LDAP settings have been set.
Right now, each computer can see the other over the network. When clicking on the network from windows, a window pops up requesting a user and password.
Konqueror sees both computers under smb://. It also has a window that pops up requesting user name and password. Where do I set up these user names and pass words?
View 2 Replies
ADVERTISEMENT
Mar 18, 2010
I have an ubuntu server set up in which i would like my shared media directory to be accessable with multiple usernames / passwords because I use my admisistrator username and password for samba as well, but I do not want to give out that password to all clients in my house. And, I would like to have write permissions but keep other users to read only. Is this possible or do i need to just make one separate username / password for samba sharing?
View 1 Replies
View Related
May 10, 2010
I've just installed 10.04 x64 and I've had some problems with samba (cifs/windows file sharing). It seems like samba is forgetting user passwords, so on every reboot I have to add a password for the user that needs access: sudo smbpasswd -a tietze
I've tried restarting samba (sudo service sbmd restart), but it does not work. I have to add a new password for the user with the command above.
I tried to google a bit for a solution, but only found the following thread with a problem that seems related: [other] Samba forgets user
making samba remember passwords betweeen reboots/shutdowns?
View 1 Replies
View Related
Jan 7, 2010
I wonder if it is possible to have two passwords for one user account in 9.10. I have a long login password (5 words about 45 characters with spaces caps). I would like to set a shorter password for Authentication, sudo, etc. While retaining the original for logging in.In short:Have long password to login to computer.Have short password for everything after login.
View 6 Replies
View Related
Dec 5, 2009
I am having a problem with some users who get locked out after more than 3 failed attempts at login. This is exactly what I want to see - they will eventually remember those stronger passwords (maybe?) - but how do I re-enable their access? I haven't tried this on a live box but I can easily recreate the situation via vnc to the server in question and I assume the result would be the same. I like the policy that leads to this but I do need to let them back in - eventually. Where is the blacklist kept and how do I edit/reset it?
View 3 Replies
View Related
Nov 22, 2010
How should I organize user logins and passwords within a 6 person firm? We have several desktops, portables, servers and virtual machines. Everyone should be able to log in on each PC. Ldap seems overkill. Would NIS be more suited?How can I integrate other passwords like samba, mysql, vpn, ... Into this strategy?
View 4 Replies
View Related
Apr 2, 2010
KDE 4 in openSUSE 11.2 has the annoying feature of listing user names on the splash screen. I found out where to get rid f this for 11.1 but I seem not to able to fnd out where did it.
What can I do to hide them?
View 3 Replies
View Related
Apr 5, 2011
I have a samba share that was previously hosted by and accessed by Windows operating systems. As a result the filenames of all the files are not very command-line/linux friendly. I need to get a script or app that can go through the samba share recursively and change all file names to lowercase and replace spaces in the names with a ".", "_" or something.
View 9 Replies
View Related
Oct 8, 2009
I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
===============================================================
[2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42)
INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
[code]....
View 3 Replies
View Related
Jan 5, 2011
I recently upgraded my flavor (Arch, latest version) and now I am unable to connect to samba (latest version; obtained through pacman) either through Windows or Linux. My error logs reveal: (/var/log/samba/log.smbd)
[code]....
nmblookup shows what it should but smbclient -L gives the generic "Error NT_STATUS_UNSUCCESSFUL". I also tried to reinstall Samba. I am not sure why it continues to try for CUPS, as I do not have printers listed in smb.conf.
View 1 Replies
View Related
Feb 15, 2010
Don't worry, I know - that title probably makes this question seem way more complicated than it actually is. Here's the situation: I have a server running SLES10 with a samba share set up on it. I created a username in Samba and Linux for myself, can access the share, permissions are fine, yadda yadda. Now I want to give about 100 more people access to it.
I have active directory running which users log into and I'd like them to be able to use their active directory passwords to authenticate to the share, rather than have me create 100 individual Samba/Linux accounts. In the future the AD server will be changing over to server 2008 but I'll cross that bridge when I get there. It would be equally effective if I could pull AD passwords from AD and "auto-create" the associated Linux/Samba users. Any ideas or could someone point in the right direction?
View 5 Replies
View Related
May 30, 2011
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
View 4 Replies
View Related
Feb 9, 2010
So I've set up a Samba server through the gui. When I've labeled my shares as accessible to everyone, I can get to it no problem. However, when I tie it down to a specific samba user, I can't.
By all indications, it appears that it isn't saving the password because every time I go to edit users, it has the exact same string in the password field.
View 1 Replies
View Related
Feb 21, 2011
I'm trying to set up the server to at least ask for a password. I can connect to it without any trouble, but so can everyone else.How can I make samba ask for a password?
View 2 Replies
View Related
Apr 10, 2011
Although my smb.conf file cites /etc/samba/smbpasswd as the password file, I see that it is not in some database file. Since smb.conf doesn't seem to look anywhere else but /etc/samba/smbpasswd, how can I direct it to the new password scheme. At least this is what I find when using SWAT to display the smb.conf file contents.This seems to be preventing my windows client having access to shared printers, but yet, not shared files.
View 2 Replies
View Related
Dec 8, 2010
So a while back I decided I wanted to get to know Linux a little bit and I figured the most immediately useful thing for me would be a small home server. About this time I discovered plug computers and I eventually bought myself a Guruplug for this purpose - a small, cheap, power-efficient ARM architecture thing running Debian 5.0.6. Since then I've kind of ambled along with the project as and when time permitted (installing, tweaking, scouring manpages and tutorials is fun, but takes a lot of time), and have now finally got a nice big external harddrive formatted as ext3 and hooked up to it. The time seemed right to go for the samba install. I installed from the Debian repository, configured using SWAT and immediately hit problems.
Since the only user is me and the only access to the computer is over SSH, I have few accounts - there's root which I've disabled from access altogether, there's my sudoer account magnus, and there's my new test account magnus-smb. This one is a standard user, and has identical Unix password and samba password (added with smbpasswd). I intend to keep this up with a separate samba-access account - I'm a little paranoid about allowing any kind of access to sudoer accounts and won't even let SSHD accept password based logins.
Setting up samba, I basically tried to make it do as little as I needed to get a local file server going. The only share is homes, and its path goes to my external drive. The drive itself is mounted as rw,noexec,user from fstab.
Now, with all of that set up I'd hoped I'd be able to mount my homes shares and go. This proved not to be the case - if I set encrypted passwords = yes, my Windows 7 clients behave differently. The magnus account connects but can't authenticate - all passwords are rejected. The magnus-smb account is apparently accepted but then receives a "network path not found" error. If I set it to no, both accounts are prevented from even attempting to authenticate, and I get an error message about "this account is not approved for logging on from this station" (translation from Norwegian). I've been searching around but not finding much. I did find one article claiming this was easier after samba 3.3 and discovered that my manpages said samba 3.2. Yesterday I therefore decided to reinstall samba from source, only to find that the current stable release (3.5) also claims to be version 3.2 in it's manpages, so I probably might as well not have bothered. Oh well, at least I've installed something from source now.
My smb.conf:
Code:
# Samba config file created using SWAT
# from UNKNOWN (Q@)
# Date: 2010/12/08 12:59:41
[Code]....
View 3 Replies
View Related
Apr 15, 2011
Google finds several suggestions on how to sync passwords between samba and /etc/shadow (it can't use /etc/sahdow directly). However in my case, there is an existing samba server where users have already set their passwords. Now comes a new samba server on another machine to serve the same set of users. Is there a way to just import the passwords from one samba to another, in "stay encrypted" form (the /etc/shadow can be separately imported). I looked at /var/lib/samba/passdb.tdb but it has the hostname (share name?) coded in it and that might be a confusion to just copy the file in whole.
View 2 Replies
View Related
Jan 2, 2010
True or False: If you have a user on your Linux/Samba machine with a password, example:
User = Bob
Password = Password0
And Bob is on an XP computer, where his username is also Bob and his password is also Password0, is it normal for Bob to go to:
\SambaServer, double click on Bob's share (valid users = Bob only) and Bob get RIGHT in without being prompted?
On my prior setup, the user HAD to log in. If they wanted auto login next time with their credentials, they had to check "remember password." But now it's as if Samba knows who they are. It's very strange. What's the normal behavior? Must EVERYBODY authenticate with passwords, or if the Windows credentials are the same as Samba does it just somehow auto-detect it and allow them through?
View 3 Replies
View Related
Jun 11, 2010
How to make a Server of LOGIN / PASSWORDS for flexible linux machines? Samba config files for the server and the client. The clients, if no network, shall use the /etc/shadow.
View 10 Replies
View Related
Jan 9, 2011
I was wounder if there is a way to add two different passwords for one user.
View 14 Replies
View Related
Jan 10, 2011
How to I get linux to stop prompting me for a password and remember it? For instance, when using the root user, I always get prompted, but I would rather only be prompted once per user session.
View 1 Replies
View Related
Jul 1, 2011
I just did a clean install of Natty yesterday and have been setting it up for my children and myself. I am trying to set up desktop user accounts for them without them having to put in a password for themselves but have not been able to change this via system/administration/users and groups. Is this a bug or is this feature (turning off passwords at login) turned off in Natty?
View 4 Replies
View Related
Feb 24, 2010
I am doing samba file sharing. I got struct in problem relating reading passwords. I have to read password whatever user enter from web interface and process it. And through that password and username the user must log on from windows system. I have to write appropriate shell script for this. this is all i am doing for sharing files through samba.
View 2 Replies
View Related
Jun 10, 2010
I have couple of users in one machine. I can access the /etc/passwd,/etc/shadow and /etc/group files in this box. I have another box. I want to create some user accounts in the second box by just looking in the passwd, shadow and group files in the first box. I would just copy over the corresponding lines into the corresponding for whichever accounts I want to create as new and also change the lines for which I want to update the account information. Is this possible and will also the passwords work fine? Please also let me know there is any good tool for automatically doing this kind of stuff. Both the boxes that I have are Ubuntu machines though one is running Ubuntu 8.04 and the other is 10.04.
View 5 Replies
View Related
Apr 19, 2010
I was wondering if someone had a logical reason and therefore complete, hopefully that makes total sense, for why when I install Ubuntu I cannot use the 'sudo' command either with root or user passwords. Even if I try to edit the permissions for sudoers, I still recieve an error message that says access is denied and so as the root user on my pc I don't understand why I can't put my name in the sudoers file or use the sudo command with the correct password.
View 9 Replies
View Related
Apr 21, 2010
Running SunGard Banner software on RHEL 4.2 x86-32 bit Linux server Oracle Application 10.1.2.3 samba enabled. Users run processes/reports that are logged in a daily log file. In our daily job submission log files the user password shows up as clear text.The password shows up as $PSWD (sample from the logfile):
$JOB
$BANUID
$PSWD
[code]...
View 1 Replies
View Related
Oct 2, 2010
After upgrading my ubuntu server from 9.04 to 10.04, the window computers couldn't resolve samba shared names anymore, the error code displayed by Windows was 0x80070035.
I was using the ubuntu server as a samba server, using 'share' as the security authentication method, it has been working very well under previous ubuntu versions but, after upgrading to 10.04, the windows computers can't access the server shares anymore; the linux computers don't have any problems (I can access the shares from linux).
As a workaround, I've added the name of the server in c:windowssystem32driversetchosts; but I'd like to know how to fix the problem without modifying every windows computer.
View 1 Replies
View Related
Mar 27, 2011
Continuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.
By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.
View 4 Replies
View Related
Aug 31, 2010
On one of my Samba shares on my server I have a folder of mp3 files of my CDs. The one I am having an issue with is "Clarence Carter/Dr. C.C." (yes, the one with the ULTIMATE party song). The "Dr. C.C." folder name is normal locally on the server, but across Samba it comes out "DMOU3A~H". It's definitely Samba doing it, because I get the same result whether accessing the share from Linux or Windoze. I can still access the folder this way, but it would be nice to not have Samba mangle the folder name this way. I am using Samba 3.4.2 on an Athlon64 X2 system running Slackware64.
View 1 Replies
View Related
Jun 29, 2009
I just installed a CentOs 5.2 Linux server and I'm trying to configure Samba. The file names of files created from the windows workstation are ok, but the file names of files created from the Linux server appear with different names than them are supposed to have. I've checked the Samba configuration file but I can't find options for fixing this trouble. Samba version 3.033375
View 6 Replies
View Related
