OpenSUSE Install :: Can't Login To Root In GUI / Error Can't Establish Any Listening Sockets?
Aug 28, 2010
I was logged in as root, made some changes to my users and think I may have inadvertently changed root somehow. Ever since then, my machine runs just fine, I can sudo, Yast, etc without any issues. (Root password is fine) but when I try to log in as root, the system changes the screen display, as if it's going to login, then returns me back to the login prompt without error. If I "ctl+alt+F1", I drop out to the console and can login as root, but cannot startx because the display is already in use.... So, I removed the .X0-lock, but still cannot get the GUI to load. (after running rm /tmp/./X0-lock, I get a fatal error, "can't establish any listening sockets..." "Ctl+Alt+F7" brings me back to the GUI where I am logged in as myself in Gnome) if I login with my user account, everything runs fine and all is well.
View 9 Replies
ADVERTISEMENT
Apr 28, 2011
I have Lenovo T61 with opensuse 11.4 which until this morning was working just fine. I have used OpenSuse on this notebook for about 2 years with out much trouble. This morning on boot up I could not login because GDM was not listening to the keyboard for some reason. I rebooted on a live disk and the hardware was just fine. I switched to init 3 in /etc/inittab and the keyboard was working fine. If I started X with startx it still worked fine. If I started gdm the keyboard was not working anymore, so much so that I could not do {ctrl}{alt}{F1} to switch to a virtual terminal or {ctrl}{alt}{bksp} to kill X, nothing. The mouse worked so I could reboot.
I installed KDM and switched to it instead of GDM for the display manager with yast and was able to login and everything is fine. I would like to switch back to GDM but it is not that big of a deal
View 2 Replies
View Related
Apr 2, 2011
[root@itsupport ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs [FAILED] Iam facing the above error when i restart the service httpd
View 9 Replies
View Related
Sep 29, 2010
root@HOST [~]# /etc/init.d/httpd start
Starting httpd: no listening sockets available, shutting down
Unable to open log [FAILED]
root@HOST [~]# /etc/init.d/httpd restart
Stopping httpd: [FAILED]
Starting httpd: no listening sockets available, shutting down
Unable to open logs [FAILED]
root@HOST [~]# tail -n 10 /var/log/messages
Sep 29 17:59:30 localhost avahi-daemon[2870]: New relevant interface wlan0.IPv4 for mDNS.
Sep 29 17:59:30 localhost avahi-daemon[2870]: Joining mDNS multicast group on interface wlan0.IPv4 with address 196.219.240.236.
Sep 29 17:59:30 localhost avahi-daemon[2870]: Registering new address record for 196.219.240.236 on wlan0.
Sep 29 17:59:31 localhost avahi-daemon[2870]: New relevant interface wlan0.IPv6 for mDNS.
Sep 29 17:59:31 localhost avahi-daemon[2870]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::223:cdff:fecb:9c5e.
Sep 29 17:59:31 localhost avahi-daemon[2870]: Registering new address record for fe80::223:cdff:fecb:9c5e on wlan0.
Sep 29 17:59:31 localhost NetworkManager: <info> (wlan0): device state change: 7 -> 8
Sep 29 17:59:31 localhost NetworkManager: <info> Policy set 'Sunsoft1' (wlan0) as default for routing and DNS.
Sep 29 17:59:31 localhost NetworkManager: <info> Activation (wlan0) successful, device activated.
Sep 29 17:59:31 localhost NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
What is the problem I have a local server
CentOS Linux
View 19 Replies
View Related
May 23, 2011
Code:
[Sun May 22 04:02:06 2011] [notice] SIGHUP received. Attempting to restart
(98) Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Above message is from /etc/httpd/logs/error_log.1. Saturday morning I reinstall my server. After finish, no error. I can access my HTTP server. Monday morning it has crashed. I don't know what is the meaning about this message.
View 2 Replies
View Related
Apr 29, 2011
I am very new (since yesterday) to Linux also new to web server setup. I have installed all LAMP components, including SSL as described here: [URL]. I have added LISTEN 443 Wanted to restart the apache server -> no success ! stopped it, now doesn't start at all:
Warning msg=>
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:44 no listening sockets available, shutting down . .
Failed
I tested Apache and my PHP earlier and it worked. Now after SSL and FTP installation it doesn't work anymore! Also I am wondering about my server name, it is the set IP of the web server, surly i should change that? Only used link for SSL set-up, used diff links for apache php etc (also have java JRE installed as I will need that later for my app) also have GNOME available, but prefer command line.
View 5 Replies
View Related
Sep 16, 2010
I have just installed Ubuntu 10.04 and it works fine. Next, I attempted to install Apache 2.2.16 server on the machine. I was able to get Apache installed but I cant't get it to start. The command I used to get it to start is "apachectl -k start" and got the response "command not found". Then I used the absolute path which is "/home/Administrator/Downloads/apache/bin/apachectl -k start" and got the response"httpd: could not reliably determine ther server's fully qualified domain name, using 127.0.1.1 for ServerName(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80.no listening to sockets available, shutting down". Please advise me on what to do. My eyes hurt from looking at the screen for so long trying different options and reading almost all the apache install instructions that exists. Just ready to have it up and running.
View 7 Replies
View Related
Feb 5, 2011
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies
View Related
Dec 8, 2009
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies
View Related
Jun 13, 2011
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies
View Related
Apr 11, 2010
I have a dual-boot system with windows xp and suse 11.2. The last time tried to enter to suse i couldn't login to my account ,only as root. I tried to solve this through suse dvd repair option andit detected a problem in grub. i repaired it but still nothing.Also the /home partition exists and i can access it when i login as root.
View 4 Replies
View Related
May 10, 2010
I have installed OpenSUSE a few months ago and worked fine. But from yesterday i can't login with root user. I received the message:
Login: root
Invalid user name
I have no question for password neither.
View 9 Replies
View Related
Aug 3, 2010
I was configuring usermod for vboxusers and reboot when suddenly I can't even login to my own account except for 'root'.
I had disabled user login before this. There is only 1 group when I checked in YaST which is 'users' and its group member is 'games'.
Why can't I login to home account?
View 4 Replies
View Related
May 9, 2011
Using openSUSE 11.4 (64-bit). Desktop is default KDE. All of a sudden I am no longer able to login. My desktop only has one user and when I key in the password (which I am 100% sure it is correct!) I get the dreaded "Login failed" message. I followed these instructions without success: How to reset/recover the ROOT password in openSUSE | SUSE & openSUSE Following the instructions in the above link, I tried re-typing the old password and created new ones too. But I keep on getting the Login Failed message. A strange situation
View 9 Replies
View Related
Aug 13, 2009
How can I enable "Auto Login" for root user?In " Yast --> Security And Users --> User And Group Management --> Expert options --> Login Settings " is just my own user and there's no root user to choose.
View 9 Replies
View Related
Mar 26, 2010
Is there a way to login to an account with only the root password? Because I really need it the first unlock the computer next to me and second because I just want to know.
View 9 Replies
View Related
Jul 12, 2010
So when I write my password in a terminal the letters occur in clear not ***(star). what shall I do that enetering the password to work right.I want to say if I push key f for example the system to show me one *.I know it's easy but really I forgot .
View 9 Replies
View Related
Jul 23, 2010
I just did a clean install of 11.3 over my dual boot xp/11.2 system and kept my home directory.When I booted the system a console box came up.I then disabled auto login and rebooted.The login screen showed two users, 1- Tom and 2- Root.When I login as Tom the console comes up and when I boot into Root the GUI KDE system comes up.How do I delete Root from the Login screen and make it so that user Tom boots into the GUI KDE desktop?
View 2 Replies
View Related
Dec 30, 2010
I just happened to lock myself out of ssh access on my xen virtual server since I changed the ssh port but forgot to open it in the firewall. No problem, I just access it through VNC in VM manager, I thought, however I have some special chars in my root password and the keymap through VNC seems to have changed somehow. So I cant login as root, nor do su or sudo. I can login as user. I need the sign " but can't figure out how.
View 1 Replies
View Related
Feb 19, 2010
I need to run a script (which requires root privileges) on login per-user only. I want this to runtomatically so I'll add an appropriate line to .profile.A couple of questions:1 The easiest way I can think of to run the script as root is to setuid, but I know there are security concerns. Is there a better way
View 6 Replies
View Related
Jun 10, 2010
when users login in kde4 it shows kstartconf4 not found or failed error code 127. for both suse 11. 1 and suse 11.2 but kde3 works well I removed .kde etc it still failed
View 5 Replies
View Related
Jan 28, 2010
I added a whole slew of apps to my favorites and lost the 'Shutdown' option...every time I try to shutdown in the Terminal I am told I must be logged in as Root to do so...I can't figure out how to do this I'm a newbie to Linux but a CNE 5 -haven't used it 10 years- an MCP and A+ certified I've searched local help and SuSe's site and I can't find anythingI've only spent a couple of hrs on this and have had SuSe 11.2 installed since last Sunday
View 9 Replies
View Related
Aug 16, 2010
I am running vsftp on one of my systems and when trying to connect to it it errors out with this: vendion@Loki:~> ftp 192.168.1.100 Connected to 192.168.1.100. 500 OOPS: could not bind listening IPv6 socket
I have tried stopping the firewall and even disabling IPv6 nothing changed, any clues as to what is going on?
View 5 Replies
View Related
Sep 8, 2011
I am using opensuse 11.3. I am encountering a problem while trying to log in. The problem message was
"could not start kdeinit4. Check your installation"
I tried to solve this problem by following the instructions given in OpenSuSE 11.0 Could not start kdeinit4... i.e., I opened yast2 and then I had to select "software management" from there in order to update all the packages in kde4. But I got another error when I clicked it.
/usr/lib/YaST2/bin/y2base:/usr/local/lib/libstdc++.so.6: no version information available (required by /usr/lib/YaST2/plugin/libpy2wfm.so.2)
The error list continues. I cannot type whole error list ending with similar wordings as above as am using different computer. I tried to solve this one too by following the instructions in Relocation Error but I could not understand its line "...fixed the problem by taking /usr/local/lib out of ld.so.conf, and then running ldconfig" as am new to linux.
View 5 Replies
View Related
Aug 16, 2010
Our Sled 10.1 server is running as a VM on VSpher 4. After a power outage we can not log into the server we get the Error in Module message. I can however disable the nic card for the server in the vm console and the system logs in with no problem.
View 2 Replies
View Related
Feb 19, 2010
I am trying to deploy Kerberos and LDAP so users will be able to login in to a server on the edge of the LAN, and afterwards be able to establish a SSH connection to all the computers in that LAN without the need to type any passwords, and without the need for me to manage SSH keys [beside the SSH keys on the login server] and local user accounts.
1. When i create the users in OpenLDAP i use a template that i created by reading documentation from the Internet. In the template one piece of information that is neede is the UID. Is there any clever way the keep track of the numbers so i do not assign the same UID to two users, besides using a pen and paper?
2. For the users to be able to establish SSH connections between the computers, the host is going to be added to the keytab like this: ktadd host/client.example.com Is is possible to replace client with something genric so i do not need to mange these keytab files between the hosts?
3. Users will be logging on the the server on the edge of LAN by using SSH keys. How can i configure the setup so the users will recieve a ticket automatically when the logon without executing kinit and without entering a password, just by having a valid SSH key?
4. krb5kdc is running on all the network interfaces in the server i want it to only run on eth1, how can this be done?
View 2 Replies
View Related
Jun 16, 2010
How to enable Root login...i cant copy or move something on the HDD...I have administrator rights and password for root but i cant change permissions for the HDD without login on root and root login are not allowed .
View 10 Replies
View Related
Sep 16, 2010
I have found this link "Login Failed" message when logging in through RDP
I am suffering from exactly these symptoms. Can anyone suggest what the likely cause is? How would that bug/solution relate to my environment: openSUSE 11.3/xrdp 0.4.1-85.1?
And lastly, how can I find out if the update implied under "Additional Information" has happened?
View 3 Replies
View Related
Jul 29, 2011
I am trying to login as root but i end up with an error that says: su: Authentication failure
View 10 Replies
View Related
Jan 5, 2010
In the freshly installed Fedora 12, I installed java and maven and added following files into /etc/profile.d folder:
java.sh
Code:
export JAVA_HOME=/opt/jdk1.6
export PATH=$JAVA_HOME/bin:$PATH
maven.sh
Code:
export MAVEN_HOME=/opt/maven
export PATH=$MAVEN_HOME/bin:$PATH
Now when I try to login to "root" account giving "su" command , it gives me the error :
bash: /root: is a directory
View 1 Replies
View Related